Autodesk inventor 2024 Advanced tutorial Exercise 9 Curved circular plate

This exercise provides a basic understanding of how to create a part using Autodesk Inventor. Feel free to explore more features and functionalities as you become more comfortable with the software. Practice and experimentation are key to becoming proficient with Autodesk Inventor.

[@willemklopper389]

Now what is the holes sizes when you measure them after the bend of the plate? Defenate not 14 mm anymore

[@SolidCam-Cad]

yes it make some changes, because the hole have been created before the bend process ant it have some effect

[@SolidCam-Cad]

very smart question i like this question 👍👍👍👍

[@DerJohii]

The plate will be cut from sheet metal anyway. Therefor you need the flat pattern, were the wholes are circular and exactly 14mm.

[@shemo06]

awsome !

[@brianotieno3141]

Well done, sir!
I would like to know where this component is applied or used.
I'm simply curious 😉

[@mrcoolabhishek123]

For reinforcement of drilled holes. Eg if you are making a hole of 6 inch on a header pipe of 10inch, you will weld this fitting around the hold to give more strength to pipe. This fittings generally used in hot tapping.

[@TesfamAbraham]

❤❤❤❤🎉🎉🎉

[@melihoksuz1344]

hello, its a very useful video first of all. Thanks for it!
I had a question, when I am doing yhe exact steps I cant have my extrudes (in this case holes) follow the curve such as, they stay almost in space, like they did not stick to the part. I can attach a picture if it was possible but do you know how I can fix it or what might be causing the issue?
Thanks a lot! @solicam-cad

[@SolidCam-Cad]

Thank you sir🙏 . if you have followed the same step as i did it must work . do have extruded the first sketch or do you have apply sheet metal with a thickness ? to create those 8 holes try to use cut command instead using extrude cut . if it is not working so send me picture [e-mail]