Ceram Build-Up Liquid Allround from Ivoclar. It is made for Emax ceram and depending on the other firing temperature you could try to use it. I would not recommend using it with other porcelain systems because I like to stay in the system and recommend following the manufacturers instructions.
At 8:58 you talk about the use of water, but I'd like to know what's recommended in this case. Thanks a lot for your time and videos which are very clear and informative.
@@masterdentaltechnician1914 thank you sir, if possible i would like to know the hollywood smile in your view and i want to know how exactly we can transfer the occlusion in 3 shape for upper implant full arch.
Hi, thanks for sharing... how much thickness we should cut-back ? And I don't see that you're using any dentin, is it because you're working in the enamel area?
The emax ceram porcelain can bond with zirconia ? I thought only can bond emax cad or press though. Since the zirconia is high temperature and the ceram is low fusing porcelain, so I thought cannot bond with zirconia.
Great question. Zirconia is a high-temperature material at sintering. After that, you can run it at any temperature you like. Glaze only: 725, bake on Emax ceram 750, bake on vita: 780, re-generation healing after grinding:1000
useful but at 7:20 you are talking about mamelons buth those arent mamelons but development lobes they have nothing to do with mamelons...btw its super cool to combine lobes as reflective zone in incizal edge translucent over them and then build mamelons
Any ideas out there- I use the same technique, stains, MiYO and porcelains but still end up with slightly low value/grey anterior once in the mouth (using more opaque or translucent zirconias)
Have you tried Emax Ceram Power incial or Power Dentine? That will raise the value. Also if your cutback is too heavy and you add too much incisal porcelain it will drop the value. Try not to use too translucent zirconia as a base. That has a low value from the beginning.
@@masterdentaltechnician1914 Yeah I’m using emax ceram- power incisal, OE, etc. I’ll try less cut back and a thinner layer. Thanks! I really enjoy the videos, keep ‘em coming
![Aesthetic Results With E.max Micro Layering Techniques [ Easy, Fast Results ]](http://i.ytimg.com/vi/EtKrzysUuCo/mqdefault.jpg)
![Aesthetic Results With E.max Micro Layering Techniques [ Easy, Fast Results ]](/img/tr.png)
More Videos Like This Here: th-cam.com/play/PL0nY7oSWLTR3fAYQUhaqFl9nHongUJZiC.html
Thank you so much for the show, been a lab tech for many years, about to go digital done E-Max since 2010, very much like your layering.
Thank you very much!
Thank you for teaching complex layering in an understandable way. You helped me a great deal.
Thank you. Please watch the contour video. It might be good for you.
Glad I came upon this. One of the most clear tutorials I've come across in porcelain applications
Glad to hear. Please share with your friends. I am working on a contouring video series.
@@masterdentaltechnician1914 looking forward to it!
Thank you for sharing. excellent class. God bless you. Greetings from Brazilians.
I am glad you liked it. Please share with others 🙏
Very nice! What type of liquid stabilizer do you use to get that controlled porcelain layering, and is it universal or just for emax? Thanks
Ceram Build-Up Liquid Allround from Ivoclar. It is made for Emax ceram and depending on the other firing temperature you could try to use it. I would not recommend using it with other porcelain systems because I like to stay in the system and recommend following the manufacturers instructions.
Great video, thank you for sharing !
Thank you! ☺️😊
Good technique! Thanks for sharing!
Thank you HS
Very useful for my build up technique! Thank you
At 8:58 you talk about the use of water, but I'd like to know what's recommended in this case. Thanks a lot for your time and videos which are very clear and informative.
You are welcome. Water makes it more difficult to keep the porcelain in place.
thank you sir. really use full for all technician. i am looking forward your more videos.
Thank you Balaga for the nice feedback. Is there anything specific you would like to see?
@@masterdentaltechnician1914 thank you sir, if possible i would like to know the hollywood smile in your view and i want to know how exactly we can transfer the occlusion in 3 shape for upper implant full arch.
Good, comment. I will make a video about it. It is actually very easy, but difficult to explain in the comment section.
Stunning !
I am glad you liked the video 😄
Thank you for nice demonstration!
Thank you for the comment. I am glad you liked the video and was able to help you.
BIG THANK YOU! NEW SUBSCRIBER
Thank you! Welcome to my channel 👍🙏😀
Same here 👏
@stnln2180 thank you. I hope you enjoy the channel
Thank you so much, very helpful.
Thank you
nice video sir but where is the end product?
Thank you. The end product can be seen in the contouring video
It can be seen in the contouring video
Great sir it was very useful to me
Thank you!
Hi, thanks for sharing... how much thickness we should cut-back ? And I don't see that you're using any dentin, is it because you're working in the enamel area?
Sometimes I use dentine but I mix it 1:1 with Translucent T
The emax ceram porcelain can bond with zirconia ? I thought only can bond emax cad or press though. Since the zirconia is high temperature and the ceram is low fusing porcelain, so I thought cannot bond with zirconia.
Great question. Zirconia is a high-temperature material at sintering. After that, you can run it at any temperature you like. Glaze only: 725, bake on Emax ceram 750, bake on vita: 780, re-generation healing after grinding:1000
Hi fantastic video, I've been on a fewof your courses in Detroit. Do you have diagrams that I can use as reference. Thanks
Thank you.
More than perfect
Thank you
Thank you sir 😊
You are welcome
Nice work, greetings from Canada.
Thank you
useful but at 7:20 you are talking about mamelons buth those arent mamelons but development lobes they have nothing to do with mamelons...btw its super cool to combine lobes as reflective zone in incizal edge translucent over them and then build mamelons
Good point. You are absolutely correct.
thank you, it was very informative looking forward to your upcoming video.
Thank you for the great comment!
Thank you
You are welcome!
Facial cut back what kind of ingots HT or is it OK to use it on MT
I would use LT or MT
Any ideas out there- I use the same technique, stains, MiYO and porcelains but still end up with slightly low value/grey anterior once in the mouth (using more opaque or translucent zirconias)
Have you tried Emax Ceram Power incial or Power Dentine? That will raise the value. Also if your cutback is too heavy and you add too much incisal porcelain it will drop the value. Try not to use too translucent zirconia as a base. That has a low value from the beginning.
@@masterdentaltechnician1914 Yeah I’m using emax ceram- power incisal, OE, etc.
I’ll try less cut back and a thinner layer.
Thanks!
I really enjoy the videos, keep ‘em coming
Hallo, vielen Dank für das Video!! Eine Frage hab ich aber, wo kann man diese Träger bei 11:31 bestellen? :)
At Henry Schein Part# 1876051
Thanks 👍👍👍
More videos 👍
Thank you
Thank you, great information 👍🏻
Glad it was helpful!
Hi, thank you for nice video. What is your prefered ivocolor shade on wash firing for A1 A2 shades?
Thank you for the comment. I am using Miyo these days for full contour and wash bakes. Ivovolor is still a great product. For a shades use AD
Top
Thank you. Please share with your friends
More details about cut back
What details are you looking for?
With the high glazing temp of zirconia what porcelain do you use to add on?
If you are using Miyo or Ivoclar products as shown in the video the high temp is 725 Celsius
Thank you ❤️❤️❤️❤️
You are welcome
Thank you sir. Can u share your insta id