Bloody heck that’s impressive. My first chipper was a TW DHB230, I have always thought the little machines were feeble. Well worth having for tight fitting jobs or bagging up to ton sacks. Cheers great vid.
Hey there was wondering if you could help me I purchased one of these chippers but it doesn't seem to be performing very well at all. see how on this video it almost drags the branches through. Mine doesn't do that at all and you have to force it through, do I have to adjust something?
Have you adjusted the blades so there's a 5mm gap? Sounds like the gap isn't set correctly. One of the blades the bolts were glued in on mine so you'll need to heat them up to remove if yours is the same. Mine will pull most stuff through without needing to push.
It's the snaggle tooth stuff that this machine would struggle with. I love the design of it, but the gnarly stuff needs the hydraulics driving it into the knives.
I'm definitely tempted to get one as a first chipper it'll beat hauling away brush and bucking it down in the back and it also seems you could take it in back yards if u had to
how often do you have to adjust the anvil to blade gap and what do you have yours set at?? mine doesn't chip as well as yours and i think it's the gap, it lets the really thin branches fly straight through without chipping them up. thanks
I purchased one of these machines earlier this month in order to chip through piles of material several years old, composed of small fir and spruce branches, and rhododendron, and huckleberry brush. The dry material gets clogged and is unable to pass through the outlet pipe. Yet when I ran through a few newly cut spruce branches, the material flew out just like in this video. While the owner's manual says it is designed only for newly cut material, the Jansen website claims that it works on dry material as well. The people at Jansen's also make that claim contrary to their own manual. Has anyone had this experience, and have you come up with a solution? I would appreciate your feedback.
I'm about to make a purchase of one of these machines. One thing I would recommend is to make sure the anvil is set up as close to the chipper knives as possible. They cut like a scissors, so imagine a scissors with a nut and bolt loosely set. I bet that will make a big difference. You also have to make sure those knives are razor sharp. I would do a little touch-up sharpening after so many hours. I have 32 years invested as a tree service contractor and I've probably had eight or nine chippers over that span of years.
@@jimsteele7108 you are the guy I need to talk to. I’m looking into buying a wood chipper to start a business in Belize. Do you have any suggestions as to a great low maintenance diesel wood chipper that I would able to maintain by myself considering there is no wood chipper companies there?
I have one of these, I brought brand new and first use was brilliant just like this video but soon we were having to push the stuff in and it get blocked or throws out long stringy bits. Can’t find in the manual how to adjust the blades but we turned the blades around to the sharp side but the blade gap still too big so how can you adjust it please. Second thing is belts both came off and broke so we had to replace so not very impressed with it so far 🙆♂️
probably all made in the same factory in china and painted what ever colour and with what ever brand name sticker on it you want . but then again , arent most things these days.
The jansenusa website says this machine is not for the road, yet you are towing it behind your truck. Did you have to change the tires to make it road worthy?
@@mroki26 Thanks for the clarification. It was erroneous on my part to leap to that conclusion after seeing the machine in its relative position to the truck which is only to facilitate material transfer.
Do they provide these machines with diesel engines? Petrol (gasoline) is expensive £1.30 litre to 70p per litre for Gasoil (rebated agriculture diesel)
www.woodmanstore.com/526/product/jansen-gts1500e-shredder-timber-shredders-garden-mulcher--wood-chipper-wood-chipper-15hp-100mm.html no idea how reputable they are and delivery isnt' cheap...
Hello... i love it, it's good to have this to every farm. I'd like to have this machine. Well you please and link where to buy this. I waited for your reply. Thank you
@@jimsteele7108 Its actually quite impressive for what it is and the price. For smaller trims and removals it works great. But for bigger everyday tree work i'd just go straight for a vermeer somehow.
@@jimsteele7108 Alright. I'd say its perfect for what you need then. I bought the 2000 model for the kohler engine and bigger shute. It fits in my 5x8 trailer with my stump grinder lol!
Why isn't the feed opening a little lower? A safety OSHA issue? It seems like it would be an easier job if you didn't have to lift the branches so high to feed them in..
@@mroki26 isn't there still a 15hp engine on the machine in this video? 🙂 I'm trying to decide between a 1500e or a 2000pro. Do you think the 2000pro can pull in the branches as well as 1500e does if you set the knives at 0.5mm from the counter cutter?
At first it seems like a great machine. Unfortunately, after some use, it turns out that it is made of poor material. Jansen is a German company, but the chipper comes from a Chinese factory. Once again, the performance is fine at the beginning, but the first flaws appear quite quickly. Broken v-belts, cracked steel, misaligned pulley. The steel is extremely soft and you can see this. The blowpipe also clogs very regularly. I said goodbye to this machine and in the end cheap is expensive.
Chipper packs a real punch considering its size. Nice video👍
What a awesome little machine
Bobinski Brooks .,M
I have the same machine in the Uk there small but a little beast . 👊🏻
Bloody heck that’s impressive. My first chipper was a TW DHB230, I have always thought the little machines were feeble. Well worth having for tight fitting jobs or bagging up to ton sacks. Cheers great vid.
B b VV
Ppp@@regianedias4234
This is a dope ass baby chipper wow impressed dearly.
That things a beast!
thank you for cleaning all that up.
I like where the engine is and the plate over it on this one.
Mine arrived today and tested it out and it works perfectly! Just got to get a trailer for it now.
Hey there was wondering if you could help me I purchased one of these chippers but it doesn't seem to be performing very well at all. see how on this video it almost drags the branches through. Mine doesn't do that at all and you have to force it through, do I have to adjust something?
Have you adjusted the blades so there's a 5mm gap? Sounds like the gap isn't set correctly. One of the blades the bolts were glued in on mine so you'll need to heat them up to remove if yours is the same. Mine will pull most stuff through without needing to push.
How's the chipper been holding up since you've purchased it , any maintenance problems or work had To be done it yet ?
how much
@st_nuts How haz the chipper held up?
Crazy man! Awesome!
Let's be honest this is what most of us need instead of our 200xp right! Awesome
My thoughts exactly
It's the snaggle tooth stuff that this machine would struggle with. I love the design of it, but the gnarly stuff needs the hydraulics driving it into the knives.
Great Video! 💪🏼
Jansen pull the branches through very well.
Looks great. I love the way it feeds into the blades. Where can I order one here in the USA?
Crazy nice!!!
Would luv a load of those chippings. Nice
South Aftica
Really nice
Превосходно 👌👌👌
That machine is amazing. Seems to work faster than much larger chippers. Maybe its the gravity feed?
How do I buy this chipper today
Супер агрегат!!!
I'm definitely tempted to get one as a first chipper it'll beat hauling away brush and bucking it down in the back and it also seems you could take it in back yards if u had to
Olá tenho interece em adquirir
That fella is not getting paid by the hour. Machine works well too.
Probably gets paid by the job.
good~
Need want of these nice!
Works great I'm wondering if it'll work that great with hardwood?
this looks to preform really well for the money. I wonder how they compare against the new haundai branded chipper that looks very similar?
Basically the same chipper with a different name on it look around for one that gives you a good warranty
how often do you have to adjust the anvil to blade gap and what do you have yours set at?? mine doesn't chip as well as yours and i think it's the gap, it lets the really thin branches fly straight through without chipping them up.
thanks
you really have got that set up superb ,is the chip size dependent on the blade gap would you say .Seems to be chipping really good and small
Cool
Belllissimo
Great machine. Where can I buy one
Where do you take the shredded stuff?
辛苦了👍👏👏
Y cuánto cuesta esa máquina por favor..how much is the cost? Thanks
Has this been modified in anyway ie more powerful engine.
what you do with the chip? Compose?
Техника хорошая и нужная для сада и огорода .
Como faz pra adquirir uma maquina dessa onde comprar
I wish I could trade my dr chipper for this machine I would have alot more business with a machine that feeds like this one
Qual a potência do motor. Deduzo ser de 15 hp a gasolina.
👍👍👍👍
👍
Nice, up to what size
Is it available in India?
you need to set up blades to 0,5 mm ;)
How much
I wanna buy this kind of wood chipper
I purchased one of these machines earlier this month in order to chip through piles of material several years old, composed of small fir and spruce branches, and rhododendron, and huckleberry brush. The dry material gets clogged and is unable to pass through the outlet pipe. Yet when I ran through a few newly cut spruce branches, the material flew out just like in this video. While the owner's manual says it is designed only for newly cut material, the Jansen website claims that it works on dry material as well. The people at Jansen's also make that claim contrary to their own manual. Has anyone had this experience, and have you come up with a solution? I would appreciate your feedback.
I'm about to make a purchase of one of these machines. One thing I would recommend is to make sure the anvil is set up as close to the chipper knives as possible. They cut like a scissors, so imagine a scissors with a nut and bolt loosely set. I bet that will make a big difference. You also have to make sure those knives are razor sharp. I would do a little touch-up sharpening after so many hours.
I have 32 years invested as a tree service contractor and I've probably had eight or nine chippers over that span of years.
@@jimsteele7108 you are the guy I need to talk to. I’m looking into buying a wood chipper to start a business in Belize. Do you have any suggestions as to a great low maintenance diesel wood chipper that I would able to maintain by myself considering there is no wood chipper companies there?
@@ig2087 , bandit 65xp or morbark
I have one of these, I brought brand new and first use was brilliant just like this video but soon we were having to push the stuff in and it get blocked or throws out long stringy bits. Can’t find in the manual how to adjust the blades but we turned the blades around to the sharp side but the blade gap still too big so how can you adjust it please. Second thing is belts both came off and broke so we had to replace so not very impressed with it so far 🙆♂️
Is it still available in the market?
What's the price of that machine
hear is me thinking I want an eliet minor, but having seen this I think the Jensen might be a forerunner.
Интересно, а куда всю эту переработку потом применяют?
Excellent video - thanks. Just ordered one! Are you still happy with it? Any problems yet? Cheers
Green Hands Gardening Service i
Which store did you buy the machine 😃
jansen-versand.de
Are all of these "GTS1500E" chippers the same thing? I've seen many different brands and all the same model number.
probably all made in the same factory in china and painted what ever colour and with what ever brand name sticker on it you want .
but then again , arent most things these days.
Basically yes. Check out which dealer gives you the best warranty. I'd also check reviews for quality control.
I would like chipper like your where can I get one to buy,question can it chip palm leaves
I will going to buy one for use in my farm for chipper palm leaves ..
Tôi can mua 1 cai băm cây nay va xin hoi gia ban bao nhieu tiên môt cai máy băm cây
The jansenusa website says this machine is not for the road, yet you are towing it behind your truck. Did you have to change the tires to make it road worthy?
Who said im towing that behind my truck😂 no I'm not towing that behind the truck I use the trailer to move that between the jobs
@@mroki26 Thanks for the clarification. It was erroneous on my part to leap to that conclusion after seeing the machine in its relative position to the truck which is only to facilitate material transfer.
Bár nekemis elkele,kivolna használval 80százalékra.
Is this model better than gts 2000?
Do they provide these machines with diesel engines? Petrol (gasoline) is expensive £1.30 litre to 70p per litre for Gasoil (rebated agriculture diesel)
Have the same chipper, runs the whole day on about 5 Liters of gas...
Chips quicker than small timberwolfs
Gregs Mowing yeep;)
mroki26 had it got a genuine honda engine or something else?
Gregs Mowing chinese 15 hp. but i modyfying this yoke. i wide the hooper about 10 inch and gona put 24 hp lifan engine on it. video soon;)
An awesome little machine where are they being sold ?
U
@Level Asian 😂
How much are these looks wicked.
Where do you live paul? If you are in the United states, there is a dealers rep located down in San diego.
@@jimsteele7108 website/details?
Please, i would like to know the price of that fantastique machine.
how satisfied are you with jansen
Вот бы на дачу.....
Да согласен уже устал жеч
хорошая машина
Could you assiss me where to get that machin
Looks good are there any UK distributors to purchase from
www.woodmanstore.com/526/product/jansen-gts1500e-shredder-timber-shredders-garden-mulcher--wood-chipper-wood-chipper-15hp-100mm.html no idea how reputable they are and delivery isnt' cheap...
Ken Brown thank you will take a look
Where can I get one of these?
Muy buena donde puedo comprar en colombia
I would like to buy one 15hp how much
No problems it all;)
Thanks - Mines arriving tomorrow!!
Hello... i love it, it's good to have this to every farm. I'd like to have this machine. Well you please and link where to buy this. I waited for your reply. Thank you
I just bought one myself off their website. jansenusa.com no tax!
@@nathanhearn8914 how are you liking it? I'm about to make a purchase.
@@jimsteele7108 Its actually quite impressive for what it is and the price. For smaller trims and removals it works great. But for bigger everyday tree work i'd just go straight for a vermeer somehow.
@@nathanhearn8914 , thanks for responding. I have 2 bigger chippers already and was looking to fill a niche.
@@jimsteele7108 Alright. I'd say its perfect for what you need then. I bought the 2000 model for the kohler engine and bigger shute. It fits in my 5x8 trailer with my stump grinder lol!
how much does one of these cost ?
Just over 2K (GBP) plus delivery
Jay Davis
X
Нормально так
Hello.❤👍👍👍👌👌👌👌💯💯💯
It just sucks the limbs right in there. I wish that I had one.😮😮😮😮😮😮😮😮😮😮😮
Why isn't the feed opening a little lower? A safety OSHA issue? It seems like it would be an easier job if you didn't have to lift the branches so high to feed them in..
Alan Lusn because it's gravity fed
these machines are Great
had mine for a year
Alan Lusn 🚔🚨🚔🚨🚒🚑🚓
Wouldn't a lower opening actually be more of a safety issue? Easier to drop your arm in
I am interested to buy one. Is there any contact for buying this wood chipper?
S. Subiono
Email: subiono@gmail.com
I've just took delivery of jenson gts 1500e do the blades after be set to 0.5 mm thanks Adam
adam shufflebotham well, as close as you can around 0,5mm
ok will set it,at 0.5mm thanks for the reply,Adam
007765r ,m
отличная машина сколько стоит
Думаю что докуя , примерно как новая приора наверное
where to buy
How much is it
Again, how do you get it from job to job?
Trailer!
Can two it to
@@anthonygalipo9875 over the road sir?
@@stephenlnoe , no
How do u transport tbat around
pat pain :)
I think In the back of the car
I need this machine in Pakistan
Can you help
I can help you
pls contact me +86 18237112103
@@maiwu5648 can you send me more details please to my email onecimoperez@gmail.com
入口設計的在平一點
How many horse power is the motor?
24hp
I was looking at a 13 hp but this is what I need.
@@mroki26 isn't there still a 15hp engine on the machine in this video? 🙂
I'm trying to decide between a 1500e or a 2000pro. Do you think the 2000pro can pull in the branches as well as 1500e does if you set the knives at 0.5mm from the counter cutter?
Can I no the price ?
contact me to get the price +86 18237112103
Заебись!
At first it seems like a great machine. Unfortunately, after some use, it turns out that it is made of poor material. Jansen is a German company, but the chipper comes from a Chinese factory.
Once again, the performance is fine at the beginning, but the first flaws appear quite quickly. Broken v-belts, cracked steel, misaligned pulley. The steel is extremely soft and you can see this.
The blowpipe also clogs very regularly.
I said goodbye to this machine and in the end cheap is expensive.
I need this machine, how to buy it?
How much
Je 6
Только Россия далека от таких технологий.
How in the hell would you back that thing up? LoL
?
The same way you'd back up a wheelbarrow
Продаете ли вы
price plz ?
Around $2000 U.S.
Price
How to burn out a groundsman.
Сколько стоить
Prise.plise
Can you send me offer