Do an install video for this, it will be interesting to see the before and after for space savings. The OEM setup obviously works but more room is always good to have. Love the vid!
I solved the poor water pump issue on my 86, by using a 94/95 timing cover and water pump and making a one off adapter for the pulley to get the correct offset. That kit is nice, but if you have a Vortech Supercharger it won't work with it.
Wow, that’s nice. I wish the Ford factory people old Henry. Whoever is running that juke joint up there would put in some aftermarket support for people Ford people. It’s not hard for them to design stuff today. It’s all computer done you put in your parameters and you come up with a part, that’s a good looking system and that’s not bad money because you’re gonna have a lot more room upfront and it’s gonna look better
This solves problems for me. My donor car is missing accessory drive components. Bit pricey but whatever. I’m glad you showcased this, I’ll be making a purchase.
Bout time holley gave us ford guys something theyve got 10 different accessory drives for ls motors it's kinda high price but it'll come down just like the ls stuff did by then my engine bay will hopefully be done n painted😊
I wanna see the after shot of the Engine bay for how much Space is created but the Weight savings as well, because "racecar". So will there be a change(Gain) in HP?
Put the Holley Mod drive on my 49 Olds with a 383 SBC and it is an amazing kit. Don’t get me wrong my Billet Specialties Front drive on my 450CI FE Ford is astonishing but the Holley kit is clean as hell.
That's a cool setup, it kind of reminds me of the set up like new edge 4.6 2V but newer of course the mod motors give more room up front of the motor. A cool concept for the old pushrod motors.
CVF , Much better than that holley "chinese - American Blend 🤔🤬 CVF is Billet Alum etc etc And Less! GL Brother!!! Oh Thats a typical 6 Rib set up isnt it? CVF is 8 Rib ,,,,Just wanted to be clear
That's funny considering it's the same power steering pump and the sbf kit with the electric water pump is not cheaply built by any means holly just retro fitted all LS parts from the LS kit to the small block Ford timing cover and added a hell of a price tag 500 for a timing cover is a lil ridiculous even you know that
Do an install video for this, it will be interesting to see the before and after for space savings. The OEM setup obviously works but more room is always good to have. Love the vid!
I solved the poor water pump issue on my 86, by using a 94/95 timing cover and water pump and making a one off adapter for the pulley to get the correct offset. That kit is nice, but if you have a Vortech Supercharger it won't work with it.
This opens opportunities for swaps in tight areas such as Factory 5 cars, Ranger swaps, etc. Pretty cool!
Neat but 9/10 fox body owners are gonna hard pass at this price point.
You sound like a poor
The best thing I've seen come out for a fox is the full frame they just showed at sema show this year
20k for a full frame nahhhh
That is really awesome! Appreciate you sharing these new products!
Wow, that's a game changer !!
Nice! Good intro - my poor 89 has sat for almost 2 years awaiting an engine build. Other projects are in line first - 85 Ramcharger 360
Lol thanks buddy!
@@FoxcastMedia You are welcome. I was going to head down to LMR event, but was in the middle of selling the 96 F150 project from this summer.
Awesome to see companies still engineering new parts for these cars..long live the foxbody!!
And congrats on 100k subs brotha
Thanks holley I will stick with my explorer setup and volvo electrical pwr steering
The Popstang needs to live again!
Poor thing needed some attention
Hell yea! Maybe a bit pricey but what a sweet setup for sure!
That looks great. Hopefully they have something Vortech compatible in the works.
Yeah a Vortech wont work, but they may add something down the road, but a turbo sure will 😎
Very nice!
😂. I like the old ford power steering noise 😊
Mine doesn't make noise. The old 90 Town Car had 355,000 on it before it started humming. 🤔🤔🤔
Ball joint squeaking also?
Wow, that’s nice. I wish the Ford factory people old Henry. Whoever is running that juke joint up there would put in some aftermarket support for people Ford people. It’s not hard for them to design stuff today. It’s all computer done you put in your parameters and you come up with a part, that’s a good looking system and that’s not bad money because you’re gonna have a lot more room upfront and it’s gonna look better
Killer looking product
This solves problems for me. My donor car is missing accessory drive components. Bit pricey but whatever. I’m glad you showcased this, I’ll be making a purchase.
I was looking at that on the Holley website today! Going to be cool to see it installed!
this looks sick, I might have to pick it up
Yes, this kit is based on the 7.3 Godzilla design. I bought it for my 7.3 swap. Great kit.
That’s awesome!
Isnt the car your father in laws.... Why doesn't he have it... Its not even yours.. lol
@@doublerrated6735 its my wife's, her father bought it new.
Bout time holley gave us ford guys something theyve got 10 different accessory drives for ls motors it's kinda high price but it'll come down just like the ls stuff did by then my engine bay will hopefully be done n painted😊
Best intro ever. I wonder if Vortech blower kits are adaptive
THanks buddy!
Cool looking setup. Wonder how far off my Kenne Bell would be offset?
Good question, not sure on that one
Do you think you can keep a SVE 200 amp alternator with this set up?
Love the intro
What happens when the front cover pits like the oem one does? Can it be bought separate and does it cost 800 just for the timing cover?
thats bad azz, i didnt even know that was a thing
Yeah me either, its amazing the work they put into designing it
Sadly......$2,400 a little tough to justify for a toy, when it doesn't make it significantly faster!!!
It is a nice clean setup but the problem I see with it is the availability of that peticular water pump 10 years down the road.
NO! That was good!😂😂😂😂
I wanna see the after shot of the Engine bay for how much Space is created but the Weight savings as well, because "racecar". So will there be a change(Gain) in HP?
Wonder if it works with a Vortech supercharger kit?
Oh man, my wife is going to kill me!! Gotta have it!
Looking for your feedback after the install to determine if it’s worth the investment.
Nice.👍
That's a awesome kit 👌 but it pops car is still mad at you. You can try a new hatch rifle or maybe a consel sig
Built Ford tough with Chevy stuff… 😂😂😂
Pops car needs some t trim action ! 4r 70w internals in the trans ! She could make some real steam
Thanks for the updates bro have a great turkey day you and the family ❤uall ok later 🏁 💪🏼 🇺🇲 👍 supercharger next time
You as well buddy!
Only thing I don’t like about it is using Chevy parts but it is a really cool design.
Bought my foxbody for less than that kit..It is nice though
Please have a before and after shot
Put the Holley Mod drive on my 49 Olds with a 383 SBC and it is an amazing kit. Don’t get me wrong my Billet Specialties Front drive on my 450CI FE Ford is astonishing but the Holley kit is clean as hell.
I love this look, would this set-up work good with supercharger (Vortech V1 S-trim)
I dont think so, but a turbo would
Soooo.,.. how will the supercharger set ups line up ??
Epic 🎉🎉🎉
If pops car is still sittin he may as well be sittin with a 5 speed!awesome kit, maybe one day lol happy Thanksgiving man
Power steering... what's that? Mine has no power steering! 😃 I require a smog pump.
I'm glad their making new parts for our old foxbodies but $2300.😮
exactly
Yeah its pricey, but when you add up the costs of all the parts individually, it makes sense
Parts ain’t cheap for anything these days.
@@FoxcastMedia
2400 will do a lot for you engine power or chassis set up.
Love it but the Price sucks Big time 😢
my only problem is if the water pump goes bad
Dam that's expensive 🔧🚗🇺🇸🙌🦊🐎👊💪
So with all these GM parts are we gonna have to deal with all the GM leaks?😂😂
What if you have a supercharger
That's a cool setup, it kind of reminds me of the set up like new edge 4.6 2V but newer of course the mod
motors give more room up front of the motor. A cool concept for the old pushrod motors.
I'm gonna say your clutch fan isn't gonna work with it.
It needs to get gone anyway lol
Hey what knife was that i like it@FoxcastMedia
Coyote
2400 bucks gonna be a no for me
I'm not cool with putting GM parts on our beloved foxbodies. Sorry.
2500.00 for a Corvette serpentine belt set up maken your 5.0 looking like a Ls swap.i pass I only do the alternator up grade.
Way too much.
CVF , Much better than that holley "chinese - American Blend 🤔🤬 CVF is Billet Alum etc etc And Less! GL Brother!!! Oh Thats a typical 6 Rib set up isnt it? CVF is 8 Rib ,,,,Just wanted to be clear
Those kits look cheap ass hell. They are ugly
I agree basically what this is but 3 or 4 times the price
That kit looks cheap as hell. Way to tacky looking also. Guarantee that kit goes to shit quick from cvf
That's funny considering it's the same power steering pump and the sbf kit with the electric water pump is not cheaply built by any means holly just retro fitted all LS parts from the LS kit to the small block Ford timing cover and added a hell of a price tag 500 for a timing cover is a lil ridiculous even you know that