I see you have the same problem with the gear shift cover I did. What I ended up doing was pushing it down over the first big section up from the lip and now it doesn't wobble around.
Yeah, the rubber around the hydraulic control stick. Drove me nuts over the winter because it would cold air into the cab and the heater had to work twice as hard.
thank you, I am getting ready to remove my loader for the first time. When you use the loader cylinders to remove it from the sockets are you moving the control stick forward or back, left or right? thanks again
Very interesting! I too have never seen a Front 3PT for a Yanmar Compact Tractor. I have the 324 and do not recall this as an option, who is the manufacture? Thanks!
Hey! This is the standard equipment we have in Europe and the manufacturer is Yanmar. As you can see, the European model has differences from the US model, for example the headlights, taillights, side mirrors and also the seat is different. Long story short yes this three point attachment in front is standard. Even US dealers have asked me about it because it is not available there, unfortunately. Thank you and all the best to you!
Hey good question, I myself have not changed the tire pressures in fact, they are as they was when i bought from the dealer. But I just measured the tire pressures and they are like that, front 2.5 psi rear 1.9-2.0 psi. Hope that was helpful.
I see you have the same problem with the gear shift cover I did. What I ended up doing was pushing it down over the first big section up from the lip and now it doesn't wobble around.
Hey, you mean the loader lever protection rubber. it sometimes comes off yes, but on my new cab tractor it doesn't happen that often.
Thank you!
Yeah, the rubber around the hydraulic control stick. Drove me nuts over the winter because it would cold air into the cab and the heater had to work twice as hard.
I've never seen a 3- point hitch on the front end! ♡
This is common on larger tractors, but for smaller ones, don't see it very often yes.
Awesome pallet barn build sir
Thanks! ;)
thank you, I am getting ready to remove my loader for the first time. When you use the loader cylinders to remove it from the sockets are you moving the control stick forward or back, left or right? thanks again
Hey, left and right, the angel of the bucket. And slowly😉 Thank you!
That front 3 point hitch is slick as owl s%#t.
Yes it is ;)
Very interesting! I too have never seen a Front 3PT for a Yanmar Compact Tractor. I have the 324 and do not recall this as an option, who is the manufacture? Thanks!
Hey! This is the standard equipment we have in Europe and the manufacturer is Yanmar. As you can see, the European model has differences from the US model, for example the headlights, taillights, side mirrors and also the seat is different. Long story short yes this three point attachment in front is standard. Even US dealers have asked me about it because it is not available there, unfortunately. Thank you and all the best to you!
Just a question on your tractor.... what psi do you generally run in your tires, front and rear, with a front end loader?
Hey good question, I myself have not changed the tire pressures in fact, they are as they was when i bought from the dealer. But I just measured the tire pressures and they are like that, front 2.5 psi rear 1.9-2.0 psi. Hope that was helpful.
Toutrial yanmari vendadele 😄
You are right, this is a tutorial for Yanmar guys ;)
ΠΟΣΟΥΣ.ΙΡ.ΕΙΝΕ
in English please!
@@normalguydoesitall “See Original”