Becareful with the orange proform ignition module. They're junk mine was crap out of the box the distributor isn't much better sadly hopefully it works for you.
I have no idea! But its been 500 miles and 1 oil change already. So far so good. Normally I use Cam lube but for this one I decided to try something else. If it doesn't end up working out I'll let you guys know
@@nightwrencherperformance Awesome! I know that stuff is tenacious at sticking to stuff, so it may be a secret weapon against break-in failures! I've had such good luck with the moly paste, even the ARP moly packs that you always seem to have left over!
@@rodneybyrd9516 So far so good so we will see! I also used proper break in oil and now switched to a high zinc oil so I'm pretty sure I'm in the clear!
Soon! I needed to get the car to a point where the video could finish cleanly and I hadn't done enough to make a full video yet. I just finished it up and the video should be out in a few days!
@@nightwrencherperformance getting me all excited to hear it run! If you don’t hurry up I’ll have to come that way and do it myself! I joke, I can’t wait for the next upload!
Becareful with the orange proform ignition module. They're junk mine was crap out of the box the distributor isn't much better sadly hopefully it works for you.
So far I havnt had any issues but I'll let you guys know if there are!
Unsure if EP Moly wheel bearing grease is the same as say, ISKY RevLube or other camshaft moly paste. Hopefully you'll be OK!!
I have no idea! But its been 500 miles and 1 oil change already. So far so good. Normally I use Cam lube but for this one I decided to try something else. If it doesn't end up working out I'll let you guys know
@@nightwrencherperformance Awesome! I know that stuff is tenacious at sticking to stuff, so it may be a secret weapon against break-in failures! I've had such good luck with the moly paste, even the ARP moly packs that you always seem to have left over!
@@rodneybyrd9516 So far so good so we will see! I also used proper break in oil and now switched to a high zinc oil so I'm pretty sure I'm in the clear!
When will be the next upload! I wanna hear it running!
Soon! I needed to get the car to a point where the video could finish cleanly and I hadn't done enough to make a full video yet. I just finished it up and the video should be out in a few days!
@@nightwrencherperformance getting me all excited to hear it run! If you don’t hurry up I’ll have to come that way and do it myself! I joke, I can’t wait for the next upload!
I think it sounds pretty good 😎 you can DEFINATELY tell theres a cam in it now
👍💪
Mo-Power 💪
361 are known for not making any power. Get a 440 and start over the right way.
I'm gonna find out just how much power these old motors can take 👌