How to change ball bearing in ceiling fan stator
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- This video demonstrate the methodology used to replace the wear out ball bearing in a ceiling fan. It will solve the squeak sounds while it is in operation.
Disclaimer: The video was intended for entertainment purpose. Proper safety precaution required while installing and dismantling the fan up and from the ceiling. A certified technician are required to do the installation. (更换吊风扇里的滚珠轴承）
While you have the fan down replacing the very cheap capacitor might be worthwhile. For newbies taking pictures as you go might help reassembly. Very worthwhile video.
Thank you. Subscribe to my channel for more videos. Thanks for your time. Visit my channel again.
Great job on fixing the fan bearing. In America it is so much easier, you toss the old fan in the garbage, go to Home Depot, or Lowes, or any other Home improvement or hardware retail store and buy new fan as low as $30, replace it in 5 to 10 minutes, max. Ceiling fans in America are very light weight, wings are made out of light weight wood, due to safety.
I have lived in an Asian country and I know in Asian countries, sometimes you have to fix your fans the old fashion way and it can be a headache, there are so many parts, and all fans are different in those countries, some have wires placed one way, other have it completely different, no standardized parts or stores to go to. In America, Europe, due to standard parts and wiring for all the major appliances, you can repair them easily. And in every hardware stores, they are organized very properly, it is very simple to replace anything appliance in America.
+PutMyStupidThingTogether.Com
Thanks for the support.
An afford to reduce waste. The overall procedure could look tedious. New fan would be the last resort.
here ina rgentina it s sucks buying a table fan it s way expensive they steral from us here!damm economy the big countries eat the small ones it sucks man
Which is a shame cause of how wasteful it is. I'd rather repair than replace
Great video, Can we used sleeve bearing instead of ball bearing ? Which one is effective ?
Good question! I still think the ball bearing is the best. It required rotational motion rather than translational for sleeve bearing. Ball bearing has less contact surface compared with sleeve bearing.
Can if you find the same size, but ball baerings is far more durable especially ntn or skf brand.
In Australia now lucky to buy a ceiling fan for less than AU$90
Repair to helps reduce the amount of waste dumped to the earth. Repair should be the new norm.
Hello sir small ceiling fan me kitna terns dena hoga or swg kiya hoga..
kya aapako taar ka aakaar pata chala hai?
Great video, thanks!
Thank you.
Hi...in your case, are the two bearings the same spec?
Yes. Both the same.
Same brand the bearing can be easily removed without the tool showed. Use hair dryer to heat up the back panel if the bearing is stuck. Heat helps expand the metal slightly.
@@CTBLiew I changed mine recently. After a few days, sound came back. After the fan run for few hour, the sound will started to appear, seems like it's heating up and causing sound somewhere (I guess).
Liew Guo Hao
It is cause by loose screw or nut? Else try spray white lithium liquid grease into the rim. You may also apply mechanical grease around the rotor coil. Easiest will be to spray oil into those hole around where the capacitor located.
@@CTBLiew I thought of spraying the WD40, but from my past experience, the lubricant will evaporate when motor get hot and produce smelly fume. If want to disassemble again, a lot of work. Haiz…
Niceee..will try on my panasonic ceiling fan
How was it? Does it work? I have another visit to fix Panasonic electronic board. Come visit my channel again.
Nice ceiling fan
Repair should be the new normal.
Did you replace the gasket? If yes, where did you purchase the gasket from?
What type of mechanical grease do you use? Where to buy?
I replaced the two bearing.
Those are the common mechanical grease i purchased from ordinary hardware shop.
But it seems mechanical oil cater for sewing machine work best with bearing.
You might want to give it a try. The reason was those mechanical grease would plasticized at high temperature that will damage the bearing.
I was thinking if high temperature mechanical grease will be the best option.
Either option oiling is a routine task for ceiling fan. Oil base lubricant should be more feasible when it comes to maintenance.
I didn't replace the gasket. I intend to but since the ceiling fan works quietly after the new bearing installed. As long as the problem solved, the gasket should be working just fine.
+Liew Seng Choy thanks man. really helpful video. shall change my bearings and use singer oil...haha
You are welcome ! Appreciate the thumb up. LOL...
You could of just oiled the bearings instead...
Changing of bearing would be the last resort.
How did you know the correct part number for the bearing? Where did you go to buy the bearing?
+jim blake
By close examination to the inner collar ring of the bearing dismantle from the fan. There is a fine wording engraved over the inner ring.
It could be hard to read.
I went to hardware store specialized in selling bearing. I supposed any hardware store for mechanical parts would have sold this bearing.
Bring them to motorcycle parts shop.
Can you please tell me the detailed dimension of ball bearing in ceiling fan? Like what was the diameter, load capacity and model of bearing used.
It will help me in my case study.
Bearing used subject to fan model used. The one showed is S603. You may get its data sheet online.
I think the one use for motorcycle wheel will be fine.
what is the bearing code? my 28 years old kdk ceiling fan has started making squeaky annoying sound.
Refer minute 9:26th. The code normally printed onto the old bearing.
602z it is the same with the one here.
Thank you very much. I appreciate your reply.
Welcome. You may order online.
1992 kdk ceiling fan
Where did you buy the bearings? From manufacturer or hardware shop?
I got the same bearing from a bearing hardware store.
@@CTBLiew Thank you very much for the quick reply.
You are welcome. Hope it helps.
I've Change ball bearing in ceiling fan the same steps
But there are sound like Zen and not the voice of friction during the passage of electrical current only
Ie, after the separation of electricity while I still stop ((motion of inertia)) not happened any sound
Is it because the in capacitor problems
Perhaps so or cover crashing the rotor. Have you figure it out at the end?
very good experiament
Indeed correct. There are more video records to see how I experiment with other devices.
7:00 what s the name of the tool?i didnt catch it!!
The tools used to remove a bearing- bearing extractor or bearing pullers. I used a bearing extractor with three crawls.
Bearing puller price
Bought many years ago. It cost roughly Rm25.
A male fastener is a "bolt" (or 'screw'), and the female piece is called the "nut".
It's the "cotter or split" (not 'safety') pin that goes in/out of the hole in the shank of the "bolt" (or male screw and not the 'nut').
Normally it's called a (2/3 jaw) mechanical gear puller.
Note: bolt and nut are normally paired.
Thank you.
from where i get orient fan iron cage
How about online store?
Thanks bro, now ive know how to change the bearing on my 30yo kdk fan.
Let’s promote 4R. Reduce, Reuse, Repair, Recycle. No need get new fan for a broken bearing.
@@CTBLiew Great vision.
Sulochana Manasooriya
We have to do it for our future.
8:10 Interesting that chinese rulers have inches on them.... are they ever used?
Also great video!
They are hardware store here still preferred USCS unit than SI unit.
How to replace the fan cover basket
Chandan Samal
Do you mean how to assemble the cover basket?
But I would like to see you reinstalling this ceiling fan model
I have one spare ceiling fan laying around. Don’t mind made another one. Do you mean reassemble the fan from core?
@@CTBLiew what model is it?
@@CTBLiew what I mean is reinstalling from beginning
Or at least how to install this fan model to the ceiling
I have one of KDK and one of Old National brand.
National ceiling fan ,(你住在哪里)
smart!
ko
No that is a KY-15P KDK CEILING FAN
Visit my TH-cam channel. Many more guides available.
national or KDK ceiling fan
This is KY-15P KDK
I think it is National.
I like ceiling fans which I would like to be very good at physics
Subscribe to my channel. Your supports help!
1993 kdk ceiling fan
Antique fan works even till today.
10:15 what grease m.f.k.r???say it!
You may want to use any mechanical grease as long as it withstand moderate high temperature.
Exactly same bearing sound from my National ceiling fan😂
Consider get the bearing online and Change both bearing while at home.
extractor what???he doesn t speak clear english!
It came by many names. A bearing extractor or bearing pullers depending on how the fan is being designed.