Headlight Switch / Stalk Replacement - Toyota Yaris (Vitz)
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2020
- Headlight Switch / Stalk Replacement on a Toyota Yaris (Vitz). Common fault the contact gets pitted or burnt over time and if cleaning it does not work, the switch will have to be replaced. See video below to learn how to clean the contacts.
• Toyota Yaris (Vitz) He...
Disclaimer:
This video was created for informational and educational purposes only. I cannot guarantee against the improper use or unauthorised modifications of this information. No liability for property damage or injury incurred as a result of any of the information contained in this video is assumed. Use this information at your own risk. I recommend safe practices when working on any vehicles and with tools seen or implied in this video. You are using the information and automotive parts shown in this video solely at your own risk. It is not intended to be a substitute for the professional advice of a service centre or mechanic. - ยานยนต์และพาหนะ
I don't usually comment on youtube but this video deserves it. Saved me twice now
Stay blessed brother
Appreciate it. Thanks!
My neighbor who is a mechanic changed my headlight switch without disconnecting the battery. Disconnecting the battery for awhile may reset the computer back to factory setting and have to learn everything all over again. He just loosen the two screws that holds the airbag in place and just disconnected the two wires from the air bag and put the airbag away with no problem. They say that if you don't disconnect the the battery before removing the airbag, the airbag might blow up on your face. Well to my surprise it didn't and he still had no problem putting it back in again with battery still hooked up.
Thats an extremely dangerous practice, yes 99% of the time the airbag will not deploy as its designed with multiple fail safes. However if the car had a sudden malfunction or similar with the battery connected the airbag could deploy and cause serious injury. Generally speaking in the Toyota Vitz / Yaris the computer will re-learn things fairly quick, its not like a European vehicles with multiple computers and control protocols.
Best video so far on this, going to try it tomorrow - my misses Yaris blinker keeps going off after its been flicked on - the stalk stays down but indicator goes off, slight touching the stalk starts it again. Getting a new stalk and fit as per the above. May get a new clock
Great. Thanks for the comment!
Same issue
Thanks man your video was helpful to me I cleaned the contractors light wasn't working
Greetings from Suriname
Thanks!
外し方がよくわかりました。ありがとう。
I did mine today. Exact model. Thanks for the guide
Thanks for the feedback!
Did this now my stability light is on fixed one issue now I got another ughh but this did help a lot with replacement off the lever/headlight switch
Thanks! Get your car scanned to see what the fault code is.
@@AutoBuddynz so took the plastic cover off and I forgot to plug something in which after plugged in the light is gone never will I do another car job after dark or rush through it
@@jacobshiver8889 Great to know! Must have been the connector for the clock spring (steering angle)
Thanks for this man! Helped me out!
Glad I could help!
Thanks. I replaced it with your guide. Saved lots of money. However do I need to still send it to a mechanic for a reset? Or how will I know if it needs one and the mechanic just wants to score money?
No reset should be needed if your using the same clock spring and followed this video. If you have an airbag light on or something similar then you will have to take it into a workshop. Are any warning lights on? Or is everything operating as normal?
@@AutoBuddynz everything seems normal. No warning lights at all. Thanks. Saved a lot of $$$
@@neeleshj4078 Awesome!
Hello , i need help.
My 2007 yaris has problem with light switch. When switch is "on "the lights are ok . When i put switch "off" light remain on and horn come on . This cause battery dead.
@@kevinkevv2807 Try removing the horn fuse and see what happens
Helpful video... Hey man so Do toyotas use the same car switches like a Toyota Runx or corolla switch fit into a Toyota Yaris... Or it's only yaris parts?
Thank you. From memory they are different, due to auto lights etc. However best to check with Toyota. This sort of switch is common across, the Toyota Yaris, Vitz, Passo, and other small hatchbacks of that Era from Toyota.
Does cleaning the contact points with sand paper solve the problem because my park light switch doesn't work while indicators, high and low beam work. Should I replace the complete switch or clean the contact points?
This is an easy step to try first, confirming that both your rear and front park lights are not working. If it still does not work check your fuses and go from there.
Very helpful thank you
Glad it was helpful!
Thanks man!!!
Thanks!
Hi! I need your help, when i turn on headlights the automatic gear indicators(drive, rear etc) near the handbrake remains off, but my headlights works perfectly, and also the lights on my AC swithes does not work also, what can it be?
Check your fuses, sounds like one is blown
This might help
fuse-box.info/toyota/toyota-yaris-echo-vitz-xp10-1999-2005-fuses-and-relay
@@AutoBuddynz i took the car to the toyota agency here and the guy checked everything and told me i need to change the the headlight switch completely.. But everything works perfectly in it apart from the shift lights does not turn on when i switch on the headlamps, Do u think this may cause this problem?
@@AutoBuddynz I will try check the number 2 and 27 fuse
SMA nggak seklar lampu Vios 2011 dg Yaris bos q
Awesome thanks
Thanks!
Is there a high and low beam relay?
Yes there is.
My stalk has the indicator and wiper for a Right Hand drive cos we got it from Japan. It’s been changed to a left hand drive. Can I buy a LHD stalk to replace it ? Having the indicators on the right is sometimes confusing and I end up activating wipers instead.
I don't see why not, as long as the connectors are the same it should work. The loom insulation might need to be cut open otherwise it might be to short.
Have you done that?Is it working? I want to do the same with my japan toyota vitz
@@christoslagos161 yeah it's working.
Where I can get the replacement switch ?
Toyota, your local car wrecker, aftermarket parts stores and Ebay / amazon
My taillights, and parkers arent working.
I think this is the problem
Yes most likely
0a