I've got 2 of these radios and really like them. I have also got h/Held microphones and manual tuner. Made a FT8 and SSTV interface for them and works well. Vid on my channel.etc. George
Nice video. I see it has the latest firmware as you have MOX and CAT. in your menu The latest firmware has REALLY improved everything on these little QRP rigs. Personally I had the option to buy the original tru-usdx and the Chinese version. I chose the Chinese version merely for the fact that this Chinese version has an aluminium case, not the 3d printed case of the tru-usdx, which I didn't like (to each their own). The Chinese version its somewhat bigger, so parts arent as squashed together, and the fact that it this model has an internal battery which has so far lasted me over a week, I left it on permanently in RX and TX'd in cw mode. Very happy with my black-brick usdx with version 4.00d firmware like yours. Best 73 de ZS6AKW.
i found that if the audio was set to high, the speaker emitted a ringing noise in the background, if that is the case, lower the volume or try using the device with headphones. :-)
load firmware 4.00d , it clears up ssb tx and rx audio. Set Quad to "OFF" always. And set NOISE GATE to 4 and TX DRIVE to 4. this clears up SSB immensely. Best 73 de ZS6AKW
basically its a copy/rip-of from PE1NNZ/DL2MAN uSDR Design. There a lot of clones out there that variates dramatically in terms of quality. Hope you got a good one. Otherwise have a look to new truSDR.
I've got 2 of these radios and really like them. I have also got h/Held microphones and manual tuner. Made a FT8 and SSTV interface for them and works well. Vid on my channel.etc. George
You peeked my interest and yes a very interesting radio 👍
Glad you enjoyed it
I have the exact radio and no matter what you set it to it has crap voice modulation. Works great on FT8 so that is all I use it for.
That’s interesting, it’s a bit of a trade off, but it sounds like you’ve found a good use for it!
Looks like if i was deciding to get in Am radio it would be a grest starter radio 📻?
Nice video. I see it has the latest firmware as you have MOX and CAT. in your menu The latest firmware has REALLY improved everything on these little QRP rigs. Personally I had the option to buy the original tru-usdx and the Chinese version. I chose the Chinese version merely for the fact that this Chinese version has an aluminium case, not the 3d printed case of the tru-usdx, which I didn't like (to each their own). The Chinese version its somewhat bigger, so parts arent as squashed together, and the fact that it this model has an internal battery which has so far lasted me over a week, I left it on permanently in RX and TX'd in cw mode. Very happy with my black-brick usdx with version 4.00d firmware like yours. Best 73 de ZS6AKW.
Cannot clear up audio on ssb any advice?
i found that if the audio was set to high, the speaker emitted a ringing noise in the background, if that is the case, lower the volume or try using the device with headphones. :-)
load firmware 4.00d , it clears up ssb tx and rx audio. Set Quad to "OFF" always. And set NOISE GATE to 4 and TX DRIVE to 4. this clears up SSB immensely. Best 73 de ZS6AKW
@@WarrenAkerman How do you load the new firmware?
WX1PJ Giovanni then I can use also only internal microphone 🎤
It has an external mic jack but voice modulation is not good. Use for FT8, etc. only.
Niech się ludzie nie nabieraja
Dziadostwo żadnej czułości trochę na 14 kanal reszta głuche zmienić oprogramowanie albo do kosza
basically its a copy/rip-of from PE1NNZ/DL2MAN uSDR Design. There a lot of clones out there that variates dramatically in terms of quality. Hope you got a good one. Otherwise have a look to new truSDR.