I went crazy trying to have the GSM function working.The message was "searching network, please try later". Actually, it was that my sim card had a pin code set, and the PG103 cannot gess which one. So you must first desactivate the pin code on an ordinary phone before using it in the PG103. After that it works fine.
@@rafaelgordosanz9915your dad said 😮that he would take care and he would be here to pick up your stuff and then I would pick up your car so you could pick
How to setup the Wifi function only for check notifications when i have the mobile 3 hundred km away home in a enviroinment without gsm network? Looks like its a Gsm/bluetooth alarm, not a wifi alarm
if manufacturer is reading please make upgrade firmware : need to disable speaker (or disable audio confirmation from admin panel). i don't need audio alarm from unit. need this device only for logging door openings. need alarm timeout. for example after 60 seconds of alarm notification. Or without arming receive log or push notifications about sensor triggerings.
Can you explain BETTER in which configuration put for each tool? The PIR in your vidéo is door alarm and 24h? Is really not clear the manual and the vídeo
@@carlos220506 nothing.... I bought a new switchboard to use the sensors from the old switchboard. Waiting for someone from the company to give an answer, but it's difficult.
Hello this is a very good explaining video, I would like to ask, I have this alarm working with another app, but I want to change to this smartlife app, is it possible? because I try do add to smartlife app but no success...
Wich app? Is it possible to connect this alarm to a wifi network from a normal wifi router because I want the alarm connected to the wifi network of home and no have no luck, it only connect to the app of the phone not to the router
I have put A simcart in the Host, (no wifi available)and than follow your steps, i have put the phone number from the cellphone that must reseved the sms...but not reseved a message...what do it wrong?
Hi, I just got this alarm system. I have some questions: 1. The Host needs constant power supply, correct? Which of the other devices as well? 2. The SIM card is needed if you want push messages from the host, yes? So in order to use it properly, I have to buy a SIM card. Which one? 3. Where can I get more window/door pieces and cameras?
is it possible to have only the sensors on the door activated without the pir motion sensors being activated? so that when I sleep at home I only have the sensors on the doors activated. if so, how is it done?
How the hell is this a good alarm system when the intruder can clearly just disarm it without punching in a code this is a hazard of your stuff being stolen
cutting power is not a option, as it has a battery life in case of... obviously is for repelle any attempt. do like that has gaz and smoke alarm notifications and a sos button...dose help old people to feel safe when they try to do something physical without supervision
Hello, I’ve purchased 2 system and I’d like to bind together the 2 main panels….. please help me with this, would be great to be able to operate the system from 2 entrance doors in the house. Is this possible at all? Thanks
Thanks for this video which really explain how to use the SMS arm function !!!!
I went crazy trying to have the GSM function working.The message was "searching network, please try later". Actually, it was that my sim card had a pin code set, and the PG103 cannot gess which one. So you must first desactivate the pin code on an ordinary phone before using it in the PG103. After that it works fine.
How can you do that??
How to set up the sim card with the device.i don’t know how to see the apn settings for the device to set it up
@@rafaelgordosanz9915your dad said 😮that he would take care and he would be here to pick up your stuff and then I would pick up your car so you could pick
How to setup the Wifi function only for check notifications when i have the mobile 3 hundred km away home in a enviroinment without gsm network? Looks like its a Gsm/bluetooth alarm, not a wifi alarm
How it works for the others numbers you set in it? It just calls the first number you have register, what about the others 4?
if manufacturer is reading please make upgrade firmware :
need to disable speaker (or disable audio confirmation from admin panel). i don't need audio alarm from unit. need this device only for logging door openings.
need alarm timeout. for example after 60 seconds of alarm notification.
Or without arming receive log or push notifications about sensor triggerings.
I hope for these functions too.
Can i add another brand outdoor siren WiFi?
How do you set a disarm password on the main unit?
Is there option to connect wired sensors?
Hey ! How to set à passowrd on the Pg-103 ?
我剛買一個PG 103,但有点問題在新加配件有問題
how can i turn off the single siren sound when the alarm is activated? thanks
very nice video
When installing the smart live app requires password. What password and connection?
@@samuelnogueira8237 User Name: admin
@@samuelnogueira8237It’s 1234
Thanks for this video
Does it work with home wifi or its own
Hola, una pregunta, si entra alguien en la vivienda y suena la alarma, puede quitarla sin necesidad de llave, como puedo ponerle contraseña? Gracias.
Best tutorial !!!
Can you explain BETTER in which configuration put for each tool?
The PIR in your vidéo is door alarm and 24h?
Is really not clear the manual and the vídeo
If anybody pushes the Disarm will it go disarmed? I mean if the robber find the host and press the disarm will it go off? Or how it is done?
After click on disarm U put the pin or the password..
@@therianfox. How do you set it up to require a pin? On my unit it does not require one
@@gadioronvia the app on your phone, virtual PIN
Without zigbee?
Can you add additional sensors for doors/windows? if so how many?
Airlink configure: configuration failure. What I do? I cant pairing my pg103 with my smart life app...reset and unbind wifi doesnt worked...
Any solution??
@@carlos220506 nothing.... I bought a new switchboard to use the sensors from the old switchboard. Waiting for someone from the company to give an answer, but it's difficult.
Hi, what do i do if i have a cat and a window is open? And the cat goes outside? It their some setting for that?
I can’t get the on and off button to come on. It won’t slide over to on.
Hello this is a very good explaining video, I would like to ask, I have this alarm working with another app, but I want to change to this smartlife app, is it possible? because I try do add to smartlife app but no success...
Wich app? Is it possible to connect this alarm to a wifi network from a normal wifi router because I want the alarm connected to the wifi network of home and no have no luck, it only connect to the app of the phone not to the router
What app do you use before smartlife?
How to turnoff when i pess armed or disarmed speaking vioce ? So noisy😂
I have this alarm but it dosent work, can i controll the alarm in app if i only have simcard? The name of the app to controll?
Hi. How do we activate night mode?
cant add the wifi, there is no airlink. how do i remove the current AP? tuya ang smartlife is not really helpfull. :(
Hello! My problem is that I can't call the host.It rings once and after that disconnects the call. How can I solve it?
Do these alarms work without a SIM card and without internet?
Did you ever figure out?
คุณพูดภาษาไทยได้หรือครับ
SÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅ COOOOOOOOOOOOOOOOOOOOOOOOOOL
Hello, its possible to disable SMS "read receipt" ?
I have put A simcart in the Host, (no wifi available)and than follow your steps, i have put the phone number from the cellphone that must reseved the sms...but not reseved a message...what do it wrong?
Bro I have the same problem. I been trying to see how to set up the apn for the device still nothing
Have u figured it out already?
when I add more than one door sensor the panel display there are open zones, and all sensors are close, help me please
me same, did you find a solution?
Hi, I just got this alarm system. I have some questions:
1. The Host needs constant power supply, correct? Which of the other devices as well?
2. The SIM card is needed if you want push messages from the host, yes? So in order to use it properly, I have to buy a SIM card. Which one?
3. Where can I get more window/door pieces and cameras?
1. No, it's battery lasts 5 hours 2. No, you can use app and WiFi to control and receive notifications
how much the system consume data for 7 doors, 5 motion sensors plus the remote and rfid tags...anyone ?
SÅ cool
is it possible to have only the sensors on the door activated without the pir motion sensors being activated? so that when I sleep at home I only have the sensors on the doors activated. if so, how is it done?
It has "home mode" it activates only door sensors
SALUT pourquoi ne pas avoir autorisé la traduction sur youtube vraiment négatif
does it have to have a sim card if you want to receive a notification when the alarm goes off?
Apps can also be pushed
我剛買一個PG 103,但有点問題在新加配件有問題
9:43 Door Sensor
10:10 PIR Detector
How do i do if I forgot the password? To enter to menu? Thanks.
Did you find answer? Same problem...
How can you lock the keyboard?
Currently, any burgler enter the house can disarm the alarm by pressing the disarm key.
Goto
Setting - - >Switch--> keypad lock. Change to on.
Setting--> Password.
Set user Password.
Having same issue and tried the above, do you need to reset panel or something after doing this?
@@jonathanoliver8600 No need to reset. it gets the pwd immediately.
@@jonathanoliver8600 It takes a few seconds to lock, you will see a key symbol on the panel when its locked
@@miqueiasmelo1492AFter you set the keybock and password you have to press several times the "Back arrow" until a lock appears!
Hi may I know how to unlock the key board if you forgot the password?
how do i reset pg103 in factory mode?
My device is alarming on its own every day at 12:20 pm.
I can't resolve. need help
How the hell is this a good alarm system when the intruder can clearly just disarm it without punching in a code this is a hazard of your stuff being stolen
You can add a code
cutting power is not a option, as it has a battery life in case of...
obviously is for repelle any attempt.
do like that has gaz and smoke alarm notifications and a sos button...dose help old people to feel safe when they try to do something physical without supervision
The alrm system sends you a message if it is tampered with.
@@BadSaintroblox hello, how I can add a code? Thanks
How can I add a code?
You got Alexa
You got fire alarm
There is literally 1 button saying disarm so a intruder could just press disarm
Setting a password and a pass lock changes this behavior
todo bien, pero...........si el ladron entra...........puede apagar la alarma desde el panel sin pedir contraseña¡¡¡¡¡ fallo garrafal
Hello, I’ve purchased 2 system and I’d like to bind together the 2 main panels….. please help me with this, would be great to be able to operate the system from 2 entrance doors in the house. Is this possible at all?
Thanks
0:57 Mike raphone
Host de alarma desde que lo de Amazon con comprar de 2500$ y sistema casa i SOS
Hi
0:54 0:56 0:57
H mit w b feq😂
what is the default password of the host?
6666
Yo tego 1 de eso
, 😘
10311
У мяне ёсць 1 з гэтага
Nj
Yjr
7
מאור
Hbbvbbbh
this is. not able to detect if the door or window is OPEN or not? doenst work. you can ARM your home with all windows opened. TRASH
You can literally just turn off the goddamn alarm with the button or unplug it
Gvhhh