Lo felicito,nos demuestra que con ingenio y trabajo podemos liberarnos de las petroleras. Mis respetos y admiración a su trabajo,espero que lo puedan imitar,saludos desde Lobos,provincia de Buenos Aires,Argentina.
Grymt häftigt bygge! Jag undrar speciellt hur du fick multimetern att visa hur du ska blanda? Sitter där en resistor som ändrar motstånd enligt avgastemperatur? Eller en riktig lambdasensor? Försöker hitta något vettigt sätt att automarisera blandnignen i min fasta anläggning till ett överkomligt pris :)
translation: - Now we are going to start up this woodgaspot! - Lets jump into the car and leave! - I started the engine on petrol first and when I flipped the swith, it runs on woodgas. - Now, we are running at a speed of 60 km/h. - In the Volvo, there is a lever to adjust the air/gas mixture. The lever in this car is positioned at the same place as in the volvo. That is this one (points with a finger....) - In this car I have added an instrument that indicates the correct air/gas mixture ( the instrument on the floor). - The fuel consumption for this car is approx 18 litre wood chips per 10 km. - This figure would decrease in the future when the parameters are optimized. - It really comes down to the weigth of the wood in kilogrammes, the volume is not that important. - The speed of the vehicle is shown here... - end
Jättehäftigt! Om man skulle vilja ge sig in i gengasvärlden, finns det något som man bör känna till i förväg? Vilken slags fordon/motor krävs för att kunna köras på gengas? Såg att du hade konverterat en Volvo 140, fungerar det även med nyare Volvos såsom 240/740? Jag håller alla tummar jag har från att det ska komma fler videos, detta är enormt fascinerande! Mvh
@@BigBeavrSlayer But it is so much easier to use a carb. Because I think you need to program the injectors, and I can’t do that, but I can change air and gas amount in a carb very easily.
A four stroke engine uses the oil in the oil pan to lubricate the cylinders. A Two stroke uses the oil mixed in the gasoline to lubricate the cylinders. A two stroke will fire up with wood gas, but will burn out the piston rings eventually. You would need to find a way to introduce oil to the cylinder of a two stroke.
Very nice good job seems to run nice especially with automatic transmission cheers
Lo felicito,nos demuestra que con ingenio y trabajo podemos liberarnos de las petroleras. Mis respetos y admiración a su trabajo,espero que lo puedan imitar,saludos desde Lobos,provincia de Buenos Aires,Argentina.
Very very nice project!!
Riktigt trevligt 👍
Espectacular. Felicitaciones.
Grymt häftigt bygge! Jag undrar speciellt hur du fick multimetern att visa hur du ska blanda? Sitter där en resistor som ändrar motstånd enligt avgastemperatur? Eller en riktig lambdasensor? Försöker hitta något vettigt sätt att automarisera blandnignen i min fasta anläggning till ett överkomligt pris :)
Do you build the gasifier your own by a plan or do you buy it from a company? How can I build that too for my Chevy C10
How many miles per cord?
translation:
- Now we are going to start up this woodgaspot!
- Lets jump into the car and leave!
- I started the engine on petrol first and when I flipped the
swith, it runs on woodgas.
- Now, we are running at a speed of 60 km/h.
- In the Volvo, there is a lever to adjust the air/gas mixture.
The lever in this car is positioned at the same place as in the
volvo. That is this one (points with a finger....)
- In this car I have added an instrument that indicates the correct
air/gas mixture ( the instrument on the floor).
- The fuel consumption for this car is approx 18 litre wood chips
per 10 km.
- This figure would decrease in the future when the parameters
are optimized.
- It really comes down to the weigth of the wood in kilogrammes, the
volume is not that important.
- The speed of the vehicle is shown here...
- end
Jättehäftigt! Om man skulle vilja ge sig in i gengasvärlden, finns det något som man bör känna till i förväg? Vilken slags fordon/motor krävs för att kunna köras på gengas? Såg att du hade konverterat en Volvo 140, fungerar det även med nyare Volvos såsom 240/740? Jag håller alla tummar jag har från att det ska komma fler videos, detta är enormt fascinerande! Mvh
Det går att använda alla bensinmotorer som du kan stänga av bensin tillförseln och ändra tänd kurvan
@@jonashedenberg9429 👍👍🎖🎖🌷🌺🌺🌺🌹🌷🎖
The car also needs to have a carburetor.
@@mullerman1104 Fuel injection actually is better so you can hybrid drive and washes the intake down to help clear the soot buildup
@@BigBeavrSlayer But it is so much easier to use a carb. Because I think you need to program the injectors, and I can’t do that, but I can change air and gas amount in a carb very easily.
Hello. It is possible to run 2 stroke motor on wood gas?
A four stroke engine uses the oil in the oil pan to lubricate the cylinders. A Two stroke uses the oil mixed in the gasoline to lubricate the cylinders. A two stroke will fire up with wood gas, but will burn out the piston rings eventually. You would need to find a way to introduce oil to the cylinder of a two stroke.
@@derrickbouchard4018 Thank you Derrick.
Hej. Hur fixar du så flisen rasar ner, du har en elmotor med växel?
Mvh Jan
ring mej
@@jonashedenberg9429 Du kanske ska bli med i driveonwood.com.tror inte det är någon som kör på flis där, vore intressant att höra om.
English translation would be nice
Dude, did you just search on YT for gasifier truck too? Just wondering
@@offgridhomesteaders863 yep I did