Thanks for the video. Fixed my same issue on the same brand new post. FYI, I managed to get rid of even that very very slight amount of “play” that’s left over by adding just half a wrap on the bottom of the cartridge, facing forward. So it still slides into the body as it’s not 2 full wraps but just an extra half (either on the front or rear when lined up with the seat orrientation.
I have a cascade post - the company replied quick to have me check some of the bolts and tighten them but i think it is this same issue. Thanks for the video and I agree it seems like the manufacturing tolerances are too loose for such a high quality part and a little more research and testing probably should have been done before flooding the market
I bought a Rainier gen 3 recently (September 2024) issue isn't fixed it was rattling since out of the box, anyways I contacted PNW they said it wasn't this exact issue, I replied with something along the lines of "f*ck that I'll buy another dropper" customer service dude still replied that he would be curious that I open the thing again since he's convinced that issue is not the source of the rattle. He copy pasted a tutorial for the loam (with the air valve). I understand it's similar but yeah... Not impressed with PNW
Spoiler I went out and got another one up, I did not return the Rainier yet I will investigate further and reply eventually to the customer service dude 💀😈
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Thanks for the video. Fixed my same issue on the same brand new post. FYI, I managed to get rid of even that very very slight amount of “play” that’s left over by adding just half a wrap on the bottom of the cartridge, facing forward. So it still slides into the body as it’s not 2 full wraps but just an extra half (either on the front or rear when lined up with the seat orrientation.
Glad it helped and happy to hear you got your's sorted
I have a cascade post - the company replied quick to have me check some of the bolts and tighten them but i think it is this same issue. Thanks for the video and I agree it seems like the manufacturing tolerances are too loose for such a high quality part and a little more research and testing probably should have been done before flooding the market
Thx for the vid. Did the same with heatshrink and still works. But yeah, mine was 💩 fresh out the box.
Nice vid mate, my Lome dropper is having the same problem and I don't think it should be like this from factory.
I will give this fix a try.
Cheers
Did it work for you?
Get a One Up V3. It’s much better. I’ve had both.
Agreed, I have both and the OneUp is so much better
I bought a Rainier gen 3 recently (September 2024) issue isn't fixed it was rattling since out of the box, anyways I contacted PNW they said it wasn't this exact issue, I replied with something along the lines of "f*ck that I'll buy another dropper" customer service dude still replied that he would be curious that I open the thing again since he's convinced that issue is not the source of the rattle.
He copy pasted a tutorial for the loam (with the air valve). I understand it's similar but yeah... Not impressed with PNW
Spoiler I went out and got another one up, I did not return the Rainier yet I will investigate further and reply eventually to the customer service dude 💀😈
Another update, PNW customer service sent me a new one. Hope it won't rattle 🤞😁