after fixing your earbuds let it charge completely. and to prevent this problem to happen never use your earphones until it dies from low battery always put it in charge before it turns off
It worked. Thanks😊 I thought I lose hope on fixing my left earbuds. You're a lifesaver.💖 I will keep mind that do not lowbatt the battery of earbuds to keep it from working.👌
I knew someone had come up with this idea before me. I own Mpow X3 and they were totally unresponsive (they have no physical buttons). I tried with one cell first, the light didn't turn on. I eventually connected 3 cells (4.5V summed up), and they still didn't turn on, but I thought maybe I should use a different method, and upon opening the case (charger case) I pressed down and released the earbuds repeatedly while the light of the case was still on. I don't know what helped exactly, but both of the earbuds came alive... They had been dead for quite a long time, so I didn't expect them to. Thanks for the useful short video!
One way to jumpstart the battery in the earbud is to use a charging cable that is broke/has one or more of the wires exposed. And then you can try to form a circuit using any type of battery/powerbank with the wires and try to hit the pins in the earbud. Aluminum foil or any small metal pin (needle) might work. You might have to try a couple of times to hit it correctly and or just the right amount of voltage but it worked for me :)
@@kettlekorn2169 I also have a problem with my cetra can you elaborate more on how you fixed it? and do you also have the problem on your right earbuds?
Well the clever way to do this would probably be to measure the charging voltage first, and then create a series of batteries to get 1-1.2 of this voltage. For my JVC HA-A7T it was 5V so four 1,5V AA connected in series got me 6V. Worked like charm.
My jbl free earbuds would both light up when being put into the case, but the left earbud would never continue to charge for more than 5-10 seconds. Case kept thinking it had a full charge. Tried this method, case is staying on showong it is charging the ear buds, right ear bud is 100% but no lights are showing up on my left ear bud when its in the case at all now after trying this.
Thanks man! i have the exact t2c and the left piece suddenly die. I thought of the same thing but was afraid that it will damage the circuit. Now it's back alive woo!
@@TheSharkB7 it's not hot, it just have the loud static noise. I also tried putting it back in the charging case as you said earlier but nothing changed. 😅
Great tip, but trying to understand why a battery jump starts the buds but the case itself doesn't. Case current too low to start the buds or something?
@@nathanchristensen716 connecting the wires to the charging port is just like plugin the case to the charger .... I did not tried it mabye it will work if it dead unit I guss there is no lose trying it .. hope you will fix it
you can use a tape instead of magnets and use any broken toys to get the wires or any old small cable open the cable outer plastic and you will find small wires inside you can use them and cut them any length you want and strip the end of them then tape the ends to the battery. if its hard for you just ask anyone around you and maybe they can help
Yo i dropped my left airbud and now it won't charge nor fit in the case properly.What do I do? The right one stays perfectly in the case (when I turn the case upside down it won't fall out of it but the left one falls out as it doesn't fit).What do I do?
@@TheSharkB7 Thank you. I watched some guys opening the case of the same model as mine on TH-cam, but I couldn't open it. I tried so hard. I could injure my hands, so I gave up.
My one earbud stop working. It blink one on it's light but whenever i tried to connect it with my device only right earbud connects. Left one didn't connect. But sometimes suddenly both works. I don't know what's the problem. I still have warranty but the earbud company didn't respond my massage.
I guess if you use your earbud until it shut off sometimes the battery discharge completely and wont accept the low volt charging frome the earbud case. so it need a Highter voltage zap to wake up
Hey bro, after my left earbud reached 0% battery, its not changing in case, but if i push on it while its in case, it starts charging as long as weight is applied on it, Do you think its my earpiece at fault or my charging case? Also do you think its worth trying to get it charge up by keeping weight on it.
I think your charging pads on the earbuds and charging case are dirty try to clean it really good. and check if the charging pad in the case *" the pointy small gold tips" make sure it still springy and not stuck down check it and clean it and I think it will works fine
I try to my Lenovo lp1 pro because the Right side won't charge. I try the left side, light indicator on, but when i try right side, it still wont turn on.
you can do it out side of the house. I did it more than 10 times. the worst thing that can happen is the earbud will not work. and I don't think it will catch fire because the battery is already dead and discharged
after fixing your earbuds let it charge completely. and to prevent this problem to happen never use your earphones until it dies from low battery always put it in charge before it turns off
Can u do a full video on how you did this how do i cut the wire
You're my life saver. Almost cried because of my 6 months earbuds not charging anymore. Thankfully I saw this. Thank you so much ❤
happy to help
It worked. Thanks😊 I thought I lose hope on fixing my left earbuds. You're a lifesaver.💖 I will keep mind that do not lowbatt the battery of earbuds to keep it from working.👌
This worked for me. My Skullcandy Indy ANC earbud stopped working, and doing this fixed it! Thank you!
Glad it helped!
I knew someone had come up with this idea before me.
I own Mpow X3 and they were totally unresponsive (they have no physical buttons).
I tried with one cell first, the light didn't turn on. I eventually connected 3 cells (4.5V summed up), and they still didn't turn on, but I thought maybe I should use a different method, and upon opening the case (charger case) I pressed down and released the earbuds repeatedly while the light of the case was still on.
I don't know what helped exactly, but both of the earbuds came alive... They had been dead for quite a long time, so I didn't expect them to.
Thanks for the useful short video!
One way to jumpstart the battery in the earbud is to use a charging cable that is broke/has one or more of the wires exposed. And then you can try to form a circuit using any type of battery/powerbank with the wires and try to hit the pins in the earbud. Aluminum foil or any small metal pin (needle) might work.
You might have to try a couple of times to hit it correctly and or just the right amount of voltage but it worked for me :)
Like a phone charger cord?
Yes, as long as one of the cords are exposed (like with a cut).
Or use battery.@@meraiahb8315
this fcking 😍work on my rog cetra tnx man !!
@kettlekorn2169 no problem 😊
I just teach people what I have learned. I started making some videos on fixing earbud problems
@@kettlekorn2169 I also have a problem with my cetra can you elaborate more on how you fixed it? and do you also have the problem on your right earbuds?
I would kiss your feet, sir. Your solution saved my Huawei freebuds 4i. You're a true hero. THANKS!!!
Happy to help
Thank you for this tutorial! My earphones are working again!!
Wow! This worked for my Skullcandy ANC Indy left earbud which was not showing either red or blue lights! Thanks!
Glad it helped!
I wish I had looked at this video before I threw my first pair away, thank you for the tutorial cause it works
You jumpstarted your earbud, I love it! I so wanna try this and I have faith in it working but i gotta figure out where to get the cables from for it😅
I'm thinking about just cutting up an old charging cable. Should work the same.
Well the clever way to do this would probably be to measure the charging voltage first, and then create a series of batteries to get 1-1.2 of this voltage. For my JVC HA-A7T it was 5V so four 1,5V AA connected in series got me 6V. Worked like charm.
Thank a lot ....it worked for my JBL Tune beam ❤️❤️
:) 👍
Its work for KZ Z1 even though not bipp iam put in box charger work thanks💯💯💯
Great 👍
Hello it is ok to use any magnet and if there's no magnet can i use a tape
teşekkürler. qcy t13 kulaklığımın biri şarj olmuyordu. bu yöntemle hayata döndü.
Worked on my Honor Earbuds, thanks mate!!!
Happy to help
How did you identify the positive and negative terminal for the earbud?
@@shashankmendan5992 I didn't. I just touched them randomly. I don't think it matters because of the very low voltage
@TheSharkB7 ok
Thank you for saved my new earbuds.
It’s work!
This fixing technique is good and amazing of earbuds.
yes and it works for most electronics with low voltage battery. I fixed my brother old mp3 player the same way
It works! Thank you very much sir❤
Wait whete u get the wire from ? Also can I use a big magnet or any one
It worked on my lenovo lp5. Thanks
Thank you, it really is working
You really are Savior
I already lose hope for mine
your welcome 👍
i have my sabbath vooplay sitting abouut 3 years ago. then i happen to see this vid. iloveyou man. it really works hahaha
Nice
My jbl free earbuds would both light up when being put into the case, but the left earbud would never continue to charge for more than 5-10 seconds. Case kept thinking it had a full charge. Tried this method, case is staying on showong it is charging the ear buds, right ear bud is 100% but no lights are showing up on my left ear bud when its in the case at all now after trying this.
Are we going to use a 1.5v battery? Or are we going to use a 3.7v 18650 battery?
@@zteredmagic712 I used AA 1.5 battery
Its work for KZ Z1 thanks👍💯💯
Thanks bro. My headphones are back.
Love you soooo much bro trick worked for me ❤❤❤❤❤😊😊😊🎉🎉🎉🎉
Happy to help
Are working thank you very much ❤❤❤
Thanks man! i have the exact t2c and the left piece suddenly die. I thought of the same thing but was afraid that it will damage the circuit. Now it's back alive woo!
no problem glad you fixed yours
Thanks! Easy trick saved my dead earbud!
How do we figure out the negative and positive terminals on the earbuds though?
you don't..just zap it randomly
What kind of electrical wire do you use to connect the battery into the earphone?...
@@salamandermike6715 normal copper wires I found inside dead electronics
Actually use anything if it transport the electricity
To clarify, both are copper wires right?
I think I used aluminium wires here in the video but of course it won't matter. you can use any wires
Just tried this on my Lenovo thinkplus lp40 and it worked
Just use the battery and then put back in the case
Thanks a lot
Instructions unclear: I am now Electro
Good tips but didn't work for my Ht07 right bud.
It suddenly dead in case while charging 😢😢
Thank you!! It worked!
Mahn this worked.. thans broo ❤
Welcome 👍
Hello what kind of wire you use
any wire will do. I used wires I found inside a broken kids toys
I found a wire that is the color is white and red is that okay
@@elbertpalon394 yes you can use any magnets or a tape or anything to attach the wire to the battery and you can use any wire with any colour
Thank you very much i will try this i hope it will work
It worked!!! Damn! Thanks a lot!
just like magic
OMG IT WORKED!!!!!!!!!! ❤❤❤❤❤❤ THANKS A LOT MAN!
Glad to help 👍
It's work thank you!
I only did the wiping and blowing and tapping part shocked it worked although not the same mpow bt headset bro thanks😂
Mine won't charge the buds and the charging case only display a steady red light.
Mine started to beeping continously. Is it dangerous? Hoping for reply soon
@TheSharkB7
Sorry I'm not expert but put it back in the charging case and let it charge and see what will happen..
@@TheSharkB7 Is it safe? Sorry it is beeping a continous loud static noise from afar. I'm aftaid it may cause fire.
@@aaron61378 maybe its low battery indicator? Touch it if it hot then its not safe if it cold then it's fine
@@TheSharkB7 it's not hot, it just have the loud static noise. I also tried putting it back in the charging case as you said earlier but nothing changed. 😅
Great tip, but trying to understand why a battery jump starts the buds but the case itself doesn't. Case current too low to start the buds or something?
I think it’s a safety thing. When your battery is too low it won’t charge.
@@crazythingis I guess. Or maybe the dead bud tricks the case logic that they're already fully charged/off so does nothing
Will this work for every earbuds?
I tested this on 3 different earbuds and it worked fine.. So I guss it will work for most earbuds
Can you do this to the earbud case?
I think you can but you need to open the case and to it to the case battery directly
@@TheSharkB7 Dang, so you can’t connect the wires to the micro usb charging port?
@@nathanchristensen716 connecting the wires to the charging port is just like plugin the case to the charger .... I did not tried it mabye it will work if it dead unit I guss there is no lose trying it .. hope you will fix it
@@TheSharkB7 gotcha, that makes sense, thanks for your responses and the video!
Working to my brand new earbuds not working and charging right side
Can i do it in y50 earbuds
if it's already broken then no harm trying this fix and I guess this will work on most earbuds
So do i cut the whole wire im using an old phone charger
you can use a tape instead of magnets and use any broken toys to get the wires or any old small cable open the cable outer plastic and you will find small wires inside you can use them and cut them any length you want and strip the end of them then tape the ends to the battery. if its hard for you just ask anyone around you and maybe they can help
can i use two batteries instead since i dont have cables?
how are you going to use 2 batteries without wires .? i guess you can but be carful it can catch fire if you did it for long
Will try this with my 2017 pixel buds
did it work ?
Thanks it works!
Do i need magnets or not?
@@PabloJacob-o7q no. electric tape will work
Won't it be damaged?
Yo i dropped my left airbud and now it won't charge nor fit in the case properly.What do I do? The right one stays perfectly in the case (when I turn the case upside down it won't fall out of it but the left one falls out as it doesn't fit).What do I do?
Magnet in case is loosse
My charger is not charging... I think earbuds are still good. Any idea to do the same for USB type C charger?
I will try to open the case and zap the battery directly BUT be super careful and do it outside in case if the battery catches fire or something
@@TheSharkB7 Thank you. I watched some guys opening the case of the same model as mine on TH-cam, but I couldn't open it. I tried so hard. I could injure my hands, so I gave up.
My one earbud stop working. It blink one on it's light but whenever i tried to connect it with my device only right earbud connects. Left one didn't connect. But sometimes suddenly both works. I don't know what's the problem. I still have warranty but the earbud company didn't respond my massage.
sounds like software issue. try hard rest it or pair it with another phone to make sure if it bad or just need re pair
Why do the batteries stop working?
I guess if you use your earbud until it shut off sometimes the battery discharge completely and wont accept the low volt charging frome the earbud case. so it need a Highter voltage zap to wake up
Hey bro, after my left earbud reached 0% battery, its not changing in case, but if i push on it while its in case, it starts charging as long as weight is applied on it, Do you think its my earpiece at fault or my charging case? Also do you think its worth trying to get it charge up by keeping weight on it.
I think your charging pads on the earbuds and charging case are dirty try to clean it really good. and check if the charging pad in the case *" the pointy small gold tips" make sure it still springy and not stuck down check it and clean it and I think it will works fine
I try to my Lenovo lp1 pro because the Right side won't charge. I try the left side, light indicator on, but when i try right side, it still wont turn on.
Gonna try this when i have some free time. Wish me lucj
good luck pal hope it works 🤞
What did you use to attach the cable to the battery? A magnet?
yes but you can use strong tape or somthing
I asked someone to hold the wires against the battery while I was doing the electroshock to the patient
Thank you
Where to get that wire? Please respond 🙏
if you have a broken small electronics like kid toys you can find wires in them or maybe a broken usb cables
works with any earbud?
I tried it on different devices and it works.
How i have to use different colour wire?
any wire colour will do it doesn't matter
Can this work on airpods?
I did not tried it on airpods
Nice! 🇧🇷
Where di you get the wire????
from faulty usb cables or broken electronics
@@TheSharkB7 they just have to be red and black?
@@maxrodriguez4705 no any colors will do
DOESN'T polarity matter?
For 1.5 volts I think it doesn't matter
I'm gonna try this on my Rog cetra I will come back and comment again if it works
did it works ?
i applied but mine's are not working. help me to get rid of this problem
im sorry to hear this but i have no other tricks
but of a problem...
My earbuds have 4 charging pins instead of two...
@@JustaJabberwocky touch the pins with the wires randomly
@@TheSharkB7 Ur gonna laugh but I already destroyed it out of frustration
@@TheSharkB7 Thing is chewed and busted open rn
@@JustaJabberwocky well at least you know the trick now
How is this different from putting the earbud back to the charger case?
@@LSandMC Idk but I guess the battery may have more power or amps
That doesn't fix the fact that they aren't charging in the case though....
My wire keeps falling apart
Oh man I have jabees airpods It's not charging, I tried your method but it didn't work Please help me I need it badly 😢😢😢
Sorry mate I'm not expert but try my method but touch the pads with the battery for longer time
@@TheSharkB7 man I do it ant the airpods turn hot
@@hussainharb5754 thats a dangerous sing it could catch fire I think it's time to order a new one
@@TheSharkB7 oh man I know that sad
@@TheSharkB7 can you speak Arabic
It's like jump start
Não entendi o video. Você deu um curto parece ter esbarrado os dois fios negativo e positivo
1 AA battery with wires. you take the wires and make them touch the dead earbuds charging pads randomly. the - / + don't matter in this case
Excellent
It's Alive yeahhhh thanks
Not worked :(
ah smart. Using magnets to hold the wires to the battery. I am going to have to remember that one.
Im afraid to do that lol
you can do it out side of the house. I did it more than 10 times. the worst thing that can happen is the earbud will not work. and I don't think it will catch fire because the battery is already dead and discharged
@@TheSharkB7 dead battery or work one?
@@sonyano1244 the AA battery is new but I meant to say the dead earbud battery is already dead so it won't catch fire
cant you speak ???
@@paul4cager0 no I'm a dog I can't speak human language
Won't it be damaged?
@@MahdiBorji-w1g it's already broken earbud so no I don't think it will be damaged more
@@TheSharkB7 and my earbud is QCY T 10PRO .is it works ?!
@@MahdiBorji-w1g if it not charging then try it. it may works