CAME HERE TO GET INSORATION FOR MY RAT SNAKE AND CORN SNAKE VIVARIUM SO COOL THANKS FOR POSTING ALSO THE ONE YOU DID FIRST WAS JUST THE SORT OF THING I WAS LOOKING FOR GREAT JOB ON BOTH
I never thought to use mortar. I was looking for something that I could use that would withstand the high heat of my monitor enclosure. This is fantastic.
Thank you so much! I am in the middle of building a bearded dragon enclosure and just got the foam down. I learned a lot from your video and feel inspired! Love the chickens and how positive and encouraging you are :)
This is great! I’m upgrading my bearded dragons enclosure soon so I might give this a try! She really enjoys climbing on stuff so this would be nice for her
@@LeoSeysRawr it’s not there. I’m trying to do this as well and I have everything I need but I can’t find the pond sealer he has. Everything else is either insanely over priced or it’s plastic liner. He should’ve put a list of the things
@@jamesmurray7799 this guy lives in Australia and he names them off in the video. There’s a lot of things in aus you can’t get anywhere else just gotta find the equivalent for your area
very cool, i bet that mortar makes the build very heavy though. I'm thinking of doing something similar to this on my viv but maybe swaping the mortar out for plaster mixed with sand or something.
Looks great. Working on a full terrarium right now. 3 sides and a floor covered in foam and now doing mortar. Getting heavy at this point since I am almost empty of the 60lbs bag. I am trying to find an alternative to that crommelin pond sealer in USA.
You want to look up VOC content of anything you use inside. Look for low VOC and water based stuff. Everything else gives off gas and should be cured for very long time.
Greetings Coop, I hope all is well. Fantastic video; thank you for posting it. After painting this background, do you seal the paint with anything? If so, what did you go with? Many thanks,
I know this is an older vid , but I'm hoping for a response as I followed this guide basically step by step. Will this be used in a bio set up ( or would it be safe in bio assuming it might be touching substrate )?
I know this was a year ago, but you could use foam board and rough cut the shapes you want, and the flat sides can be applied to the plywood first then use the foam around it to shape those platforms into the background
Hey cooper, is the smell that the pond sealer gives off harmful to the lizards at all? Followed your tutorial and made a background myself, but found since ive put it in the enclosure and its had heat to it, it is giving off a bit of a smell which im pretty sure is from the pond sealer.
Incredible tutorial, Coop! I'll be following this for sure!
Clint's Reptiles thanks Clint! Keen to see any you do! 😁
Oh!, the elusive Clint’s Reptiles comment... this is stinkin’ rad!!
great tutorial and appreciated the Chicken's making a cameo in the background of the making
GingerNotANinja haha thanks they are always checking out what I’m up to!
CAME HERE TO GET INSORATION FOR MY RAT SNAKE AND CORN SNAKE VIVARIUM SO COOL THANKS FOR POSTING ALSO THE ONE YOU DID FIRST WAS JUST THE SORT OF THING I WAS LOOKING FOR GREAT JOB ON BOTH
I never thought to use mortar. I was looking for something that I could use that would withstand the high heat of my monitor enclosure. This is fantastic.
Thank you so much! I am in the middle of building a bearded dragon enclosure and just got the foam down. I learned a lot from your video and feel inspired! Love the chickens and how positive and encouraging you are :)
This is great! I’m upgrading my bearded dragons enclosure soon so I might give this a try! She really enjoys climbing on stuff so this would be nice for her
I resonate with your name
I'm going to build something like this with a shelf for basking doubling as a hide underneath the shelf. very cool idea.
Thank you so much for the video, this is AMAZING! I will definitely be using this for my large tegu enclosure!!
That’s awesome , I think I could have a go you make it look easy.
Check out some of my recent fake rock videos my new method is even easier!
G'day mate what mortar do you use
Thanks Bro you really inspired me!
Thank you!
Great video! How many cans of expanda foam were used? :)
Looks amazing! Thanks for the inspo!
Thank you!
Great video. Can you please list off everything required to create this background?
why dont you just watch the video and write it down my guy
@@LeoSeysRawr it’s not there. I’m trying to do this as well and I have everything I need but I can’t find the pond sealer he has. Everything else is either insanely over priced or it’s plastic liner. He should’ve put a list of the things
@@jamesmurray7799 this guy lives in Australia and he names them off in the video. There’s a lot of things in aus you can’t get anywhere else just gotta find the equivalent for your area
Beautiful!!! You’re very talented!!!
Looks great man you got skills I’m gonna try on my daughters bearded dragon enclosure I’m going to build thank you for video it DEFINITELY helps 😊
very cool, i bet that mortar makes the build very heavy though. I'm thinking of doing something similar to this on my viv but maybe swaping the mortar out for plaster mixed with sand or something.
Love all the details. Looks awesome!
Thanks!
That looks great.
thank you!
Is it normal for expanding foam to still smell a bit like chemicals after drying for 4 days of drying?
Looks great. Working on a full terrarium right now. 3 sides and a floor covered in foam and now doing mortar. Getting heavy at this point since I am almost empty of the 60lbs bag. I am trying to find an alternative to that crommelin pond sealer in USA.
i’ll have to talk to my mum and see if we can try it out since i’m upgrading my beardies enclosure soon 😂
If I wanted to add ledges that would stick out would the foam make the the wood that holding it heavier ?
Great vid. Do you have a slower version of when you put the grout in???
Getting better and better with each background you make!
Varanibae _ thanks mate! Practise makes perfect
Did you coat it with anything after painting to make it easier to wipe over?
Did you make this terrarium?
What brad of paint did you use?
I don't recall what materials you used or methods, I just watched you make it no tutorial just a timelapse
it looks cooI but i know that's the reason I watched this video he doesn't tell you the paint colors or any of the materials he used
Is it water proof
Love it mate looks awesome you’ve got me hooked lol
This is great! Is there a reason it wasn’t all the way to the top and a bit of space left?
Just how I wanted it at the time!
Will this stick to cardboard?
Awesome background, which ratio do you use for your mortar mixture ?
I no longer use this method I prefer using a sand and cement mix. check out my gillens monitor setup video to see how i make backgrounds now!
what kind of acrylic paint did you use?
Love your channel
Thanks! Appreciate you watching all the time!
what type of mortar did you use?
Looks great! Keep up the good work :)
Thank you! Cheers!
@@coopsreptiles2588 Yeah ofcourse! No worries!
Can you make a easy to clean floor for us !!!!
Hey Coop, this helps a lot and just subbed, quick question, what colour acrylics did u use and did u mix them with anything or add water, cheers.
What breed of chickens you got?!
Awesome video Coop!
Thanks man! Naturalistic setups for the win
Coop's Reptiles #naturalornothing
what did you use at the end as i assume thats what you used to protect the paint?
The design is great, but i was wondering if the chimicals used can hurt the lizzard
You want to look up VOC content of anything you use inside. Look for low VOC and water based stuff. Everything else gives off gas and should be cured for very long time.
What is these materials what he use?
Awesome Video, Might Be Helpful In the Future
Anyone know how to get a hold of pond sealer that's not crazy expensive?
Looks great! How much did it weigh boss?
Not too sure. Certainly had a bit of weight due to the mortar but not too bad
Just would love to know where you got the pond sealer where did you buy that from?
bunnings!
Would the plyboard stick the Same for a glass tank? I've got loctite
great vid
Would you seal the finish product after you paint it or not
Nevermind just saw some of these ha. How do you make huge ones with bigger ledges for certain Monitors like Laces for example?
Also is that 3 ply ply wood
Great video when’s part 2
Very soon!
Really helpful, thanks a lot!!!
Greetings Coop, I hope all is well. Fantastic video; thank you for posting it. After painting this background, do you seal the paint with anything? If so, what did you go with? Many thanks,
I didnt for this one but you could put clear pond sealer on it
Hi I was wondering if you let the pond sealer cure before you painted it or if you painted while the sealer was still wet?
let it cure first
Hey Coop what's the reason for changing from using the liquid sandstone to the pond sealer?
No reason! Just wanted to try a different technique! Both work great along with many other ways I havent shown
Im guessing your real name is cooper, if so thats my name too. Great vid also
I loved the tutorial but I wish there were product links
What kinda wood did you use for your enclosures ?
Jannick Madsen check out the video before this one!
I know this is an older vid , but I'm hoping for a response as I followed this guide basically step by step. Will this be used in a bio set up ( or would it be safe in bio assuming it might be touching substrate )?
Thanks. How do you make larger platforms in the wall, so a adult bearded dragon can walk on it and can walk on different hights.
I know this was a year ago, but you could use foam board and rough cut the shapes you want, and the flat sides can be applied to the plywood first then use the foam around it to shape those platforms into the background
Another awesome video cheers
Awesome! Thank you!!!
Does anyone know if the expanding foam will stick to melamine
I'm almost done with my first Rockwall background but think I've started to dark with the paint 😁
how do you water proof or seal your wood enclosures so that waste and water doesnt destroy it?
Matthew Coffey pond sealer and silicone edges
Do you have to use the sealant? That one is not available in U.S. Is there a similar product
I dont use sealant on dry enclosures. If i was in the US i would use drylok on all my enclosures
@@coopsreptiles2588 thx you! Attempting one these backgrounds this weekend..🙂
@@Pattonlaff Watch serpadesigns bearded dragon video to see what can be done with drylok
Hey cooper, is the smell that the pond sealer gives off harmful to the lizards at all? Followed your tutorial and made a background myself, but found since ive put it in the enclosure and its had heat to it, it is giving off a bit of a smell which im pretty sure is from the pond sealer.
takes some time for the fumes to go.
@@coopsreptiles2588 is it safe for my lizard to be in the enclosure when its giving off the smell, untill it clears up?
@@Hexxy1 I wouldn’t
Thanks alot👍
Awesome!
Cool
Would this be safe/okay for kids to play on for example Dinosaur play world?
Bro its a reptile enclosure background
I think it for ur Pygmy dragon
your a god
You are the best josh!
I wish I can just buy a tank from someone already customized 😂😂 with planes and dirt and just sent it to my house cause it’s hard with 5 beardies
Sub
2:00 chicken rly thought its ice cream 💀