Ken-Tool: 21L-24 Backhoe Tire Being Dismounted Using Super Serpent™ Tire Tool (
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2009
- Ken-Tool's Super Serpent dismounting tool (#35448) makes short work of removing a 21L-24 R-4 backhoe tire from a Caterpillar wheel. Who says this is a difficult task?!
- ยานยนต์และพาหนะ
@harleywyssen totally agree with you. this may work on a brand new tire and rim. but i do not see this working on something that is rusted and a tire that is older then i am
Just simply ,i like that , thanks sir
Getting it off is the easy part, especially on a brand-new, soft, soaped-up tire on a clean, painted rim. Breaking the bead is the hard part, especially on a rock-hard tire welded to a rust-bucket rim! Took hydraulic tools last time it was done on my tractor.
artgoat I just did my 18-4-34 on my case took a chain and a jack all to break the bead no way a tire hammer was doing it
Hydraulic bead breaker or a Gaither Pneumatic breaker would make short work of the beads, then i would really lube the tyre up then remove the tyre with a pair of levers with the wheel still mounted on the machine.
@@diesel4life7410 I have to change the same size tires on my Allis 190. Just saw a video doing that exact method looks like it works pretty good
These work great. Bought the set through local industrial supplier.
He makes it look easy
Well done guy
Parabéns pelo seu vídeo ótimo continuar assim
T^ire was like off the rim before he even started.
VERY GOOD TYPE OF TYRE LEAVERS
Where can I get those green breaker bars?
Sou de Piracicaba, onde vende essas espatola?
It's all fun and games with new rims and tires, not so much when the bead is dirty and the rubber is dry rotted.
@michaelovitch you have to lube before removing anyway
Real world I can't see it being much of a go to tool for outside beads as most of the time you just won't have the flexibility or space with certain rim/tyre combinations.. However I can see it being extremely useful when dismounting inside beads because of the extra leverage it gives with the curve in the neck.. maybe ill try it but a straight kentool lever with a scaffolding bar has done the trick this far.
cuanto valen esas barras
Where I can get ur tools what is there indian price
موجود فين في القاهرة وسعره كام
How about an old tire?that one is new!!!
Kentool makes some great tools! That's all we use. Hard to imagine this going smoothly with a rusty ol' bitch tho.
J
.pl
me gustaría ver el desarme con un rin case
Kahaa milata ha
Si quisiera ver un vídeo Cómo armar una llanta Firestone 30.5LB-32 de 26 lonas con estas palancas... el talón es muy grueso y bastante rígida en el costado
rofl at these levers makes it harder than it is. and as usual they have a tyre that falls on and off typical
👍👍👍👍👍
شلون راح اشده
How much?
यह जुगाड कहा पर मिलता है
gostei
Yeah. Let's see those tools in action on a 40yr old tire whens it's cold outside..
பூமிநாதன் பஞ்சர்கடை பாலமேடு நன்றி ஐயா
steel bars sound cool hitting concreate
SAHUD DJ South tire service
Funny how they never show real life situation with 20yr old rock had tire on rusty rim.
En donde se compra yo estado de oaxaca mexico
New tyre and rim and lube. Try this on a 40 YO scraper tractor. Let’s see how you get on.
yep hel bend the rim for shure if you keep the old rim seen it
Con ese levantamiento le doy 6 meses a tu espalda
This is tool online
this tire was pre lubed,it's easier....
Pm?
Nja
Brand new tire brand new wheel so much lube. Nothing special.
But yet people still struggle and this guy didn't? What's your point
No really
Sir call no sir ya addaras is no watasp karo
It is never that easy
India this tool no working
Bk0