Without fail… the jams with PRS guitars are always the most melodic, no idea if it’s the way they play or sound that inspire you to play like this when you do PRS
Danish Pete's improv is amazing as always! But man, The Captain's lines were like a sweet lullaby to a child I had to listen to it again. That Bb near the end was spot on! Fun stuff as always, gents!
The bigest difference between the single and double cut is the strap mounting point is in a different position. Double cuts generally balance slightly better, though i'm sure that there is some personal preference in this too.
A minor detail that I’ve always appreciated was the shine glowing off of PRS SE pups. It’s a completely aesthetic detail, but really flashes the quality PRS puts into every detail.
What? All manufacturers that use chrome pickups are shiny. These are no shinier than Epiphone's chrome covers, or Ibanez, or ESP, etc. Completely nonsensical...
SE guitars are really cool, I teach lessons during the week and I use an S2 594 for my lessons. I use that guitar between 6 and 8 hours a day 4 days a week. It plays great and it gets the job done, but my pickup selector has broken off due to wear. And my one of my coil splits stopped working, plus the knob has been stripped off the tone pot. I am in the process of replacing my electronics with the PRS core stuff. If you use a guitar as much as I do I would consider this information.
Captain, you had me at hello on just that short sweet solo to open the video. Such beautiful expression, feeling, and articulation and your vibrato is just WOW! Best regards from a friend across the pond.
Yes! I needed to hear this as I have to practice more constant and organized on weaknesses specifically more theory. You and Henning have led me to the amzing gear I have today I which has motivated me to play way more however easy to be distracted so hearing this helps immensely!
Love both my 594s - a 2016 Core Double Cut (bought from Andertons LOL) and my most recent 2019 594 Double cut Hollowbody version (my Avatar pic) and both are exceptional instruments. The Pattern Vintage maybe a bit 'chunkier' than other PRS necks, but to me, it feels like its 'broken in', worn asymmetrically over 'years' of playing to fit my hand perfectly - not 'new'. The rolled edges always help but the carve too helps more. The DC does allow a bit more higher fret access. Its not just the fact that the top section joins the body at a 'higher' fret, but that also means the 'heel' is further back allowing a bit more 'neck' before it thickens to the heel. Not to say the Single Cut doesn't have decent access and the scoop on the cutaway does help their too but there is a difference. I think it does make a difference in the tone too. I think its great that now more people can now get these 'amazing' vintage inspired guitars. They may not be 'as good' as a Core, not the 'best' Pups, Pots, wires, fret wire, nuts, tuners etc that you can get with a Core, but they certainly aren't a 'quarter' of the guitar for a quarter of the Price. Smart 'compromises' to save on the cost - like overseas production to 'save' on the labour and overhead costs, veneer to save on 'pretty' wood costs, shallower carves to save on 'Hands on' time required to sand/finish those guitars etc. According to PRS, a Core Violin carve takes a lot longer to train someone to sand after CNC than an S2 - 3-4x longer so 1 person can't get through as 'many' per day and/or costs 3-4x the labour cost in time. 1 per hour or whatever the 'hourly' pay or 1/4 of an hour to do an S2 so only a quarter of a hours labour cost per guitar. Its a 'smart' compromise as its not compromising the playability, the features, the reliability etc to sell at a lower cost...
Awesome stuff! The 594 is my fav PRS design simply for the fact that you get 2 volume controls 😄 I was turned away from the screen when he switched to the double cut, and I agree, it's def a bit brighter. It has its whole own tone, and I totally love it!
As an amateur pickup winder, I'll speculate on one reason why the Core PRS sounds brighter and more complex than the SE version: While the pickups might have the same spec on paper (low 7.2k wind, A2 magnets), the baseplate and covers are probably made from different materials to save costs. I'll guess the Core pickups have nickel silver baseplates and covers, while the SE versions have brass baseplates and either nickel-plated brass covers or nickel silver covers with copper underplating (guesswork on my part, not having inspected either). Both of those changes will subtly roll off the highest frequencies - where the open complexity lives - resulting in a slight cutoff at the top end. Other factors will influence the tone, including the wood and overall construction, but the pickup materials absolutely will make that specific kind of difference.
There's a good video on the PRS channel with Paul talking about how they build pickups. There's a lot that goes into the core pickups that they can't replicate exactly with the SEs
As pete mentions, the look of the USA 594s with the gold pickup screws is really a nice touch so that's one of the first things I did on my faded blue McCarty 594 SE is I put gold pickup screws in, I took some steel wool to the pickup covers to give them a sort of brushed look, changed the pickup rings to the somewhat more rounded PRS core model pickup rings(actually just drop right in, which is nice) in ivory since the black ones just threw off the vibe. Put some locking kluson tuners on, and switched to some clear knobs instead of the black ones. Looks as good as it plays and sounds now.
I just picked up a Vintage Cherry SE 594 Single Cut today from my local guitar shop. $699! I was actually looking for an SE Paul’s Guitar but I couldn’t pass on the SC 594.
Late to the party on this, but I just wanted to add the red single cut Standard version is more impressive in person. Just tried one at GC and really liked it. I don't usually like the thicker neck profile, but it really plays nice. Way better value for money than the Core line. (Although admittedly the Core models are beautiful to look at.)
5:20 fun fact: the old ‘58 and ‘59 Les Paul that Paul Smith measured were 24 and 19/32 inches, which is 24.59375”, so they round it up to 24.594, hence the name 594 ;)
I have two 594 cores and they are amazing, I sold all my Gibsons for these two and they are the perfect les Paul style guitar. If these are anything close, they will be killer at that price.
I would not sell my Les Paul Custom because I have a McCarty 594. There is enough of a difference. The LP weight causes the diving neck forward when sitting with it and it has heavier creamy sound. Yes I don't play my LP as much as I prefer the more balanced sound of my 594 but it's still nice to have but that is me.
I have two artist package 594s, both singlecut, one with HB’s the other with soapbars. I recently purchased the SE SC594, and it really is surprisingly close to the cores. As they mentioned the SE is a little more compressed with a touch less high end, but maybe a little more mid bite. Which makes the SE work a bit better for just rocking out. But I do plan on sanding down the SE neck. The finish just doesn’t feel as good as the cores. But to be fair the soapbar has a bare rosewood neck. And nothing beats that. :)
Love that they did this, great video guys! I was hoping the double cut color would be closer to the factory image but hey, get watcha get. They still look amazing!
Hey Andertons, how about occasionally adding a metric that nobody else seems to, which is a spectrum analyzer. With compression at your end and at youtube, it’s not always easy to tell. It would also possibly answer some questions about wood. I see in a lot of reviews, you talk about the richness and depths of particular guitars, without explaining why that isn’t always a desirable quality. It’s worth commenting that on G&L strats, they opted to go with a a bass cut as well as a treble cut on the tone controls. I don’t think less experienced players realize that sometimes a narrow band which gets your frequencies out of other band members way is an advantage to the bands overall sound. In a studio frequencies are regularly shelved, sometimes starting with a less expansive guitar can be a good start. Something which may not be understood by people looking for a guitar or amp that can fill a room, rather than fill a slot when sandwiched by a band
when you guys are jammin its cool you notice when the other guy is into a wicked improve idea like when at the end jam pete playing with his fingers pullin the string to a long drawn out bend.Oh the first groove you guys were playin over had a killer drum well ah groove again and the chord selection was awesome to i would of murdered playin some long drawn out bends to it but great stuff really right on.
at about 13 minutes in It's nice to see the foreshadowing of Epiphone's inspired by gibson custom guitars that have been coming out this past year. also at 15 minutes, pete mentions he feels that the neck on the maple topped double cut feels chunkier than the standards, and it is! it's by a small margin, but someone I watched did measure the necks and the maple topped versions are just a hair thicker necks across the board, for whatever reason.
Watch you guys religiously! Just bought a SE 524 standard cherry burst. Send me something to compare it to as I’ve always wanted to start my own TH-cam channel. Just don’t have enough gear. And have never won a thing! Haha.
the surface vibrations have more surface area to cover on their way to the pickups in a single cut. a double cut has less surface area from neck joint to pickups this acts as a natural focus of vibrations in a tighter run to the pickups as there is less wood to diffuse or dampen vibrations if there was a way to measure strength of vibration on a surface I imagine the meter would show lower level vibes ib the single cut as you venture further from neck joint Pauls gift is the face he can wind those pick ups to compensate and pull more from the string action to compensate for less body "ring" just a thought
I got to try these and the DGT at the show recently, And honesty although the DGT is great I found it slightly too wide E to E whereas this mCarty was lovely!
I own one of the second production year, original McCarty Core model guitars. They did have the slightly thicker body and lower output pickups over the "normal" PRS guitars. It has a control layout just like the other PRS guitars....1 volume, 1 tone w/coil split (the first coil split was no where near as nice as the newer designs!) & a 3 way toggle in the older PRS standard positioning.....and a 25" scale length. Plays and sounds Great (except for that older coil split... losing so much volume!) and I do prefer the control layout on the older version.... just personal preference! I've never liked the dual volume, dual tone control setup.
Good Morning Guys all the best to you wish I was residing in your area would have paid a visit for sure. Your place is a Creator's Heaven world .... My collection of Guitars is reaching to 50 and all because of Danish Pete who is one of my favorite Guitar players .... Cheers from Los Angeles.....
Hi! I'm Paolo from Italy. Gorgeous guitar also in the studio edition... my favourite with Gibson les paul, sg and prs santana... only pity: 22 frets... with 24 would be more than perfect (forgive my english... io parlo italiano/je parle francais) thanks for your recensions!
I finally got to plug one of these in today. I was extremely impressed. The tone, feel and sustain were very gibson-esque with phenomenal playability. Probably see one in my future.
Don't think you can get much better for the price. Schecter would be the only guitars that may come close in value, I have the same wine red 594 singlecut in this video. Guitar absolutely sings and stays in tune for the 600$ and change I paid for it. Perfect guitar to start on/gig with if you're already an established guitar player.
Pete nailed it!! The SE 594 with the maple cap has a 50's vintage neck carve. The SE 594 with just the mahogany body has the pattern thin neck carve!! Pete recognized it right away! They may have been going for more SG feel?? Anyway.. I bought a set of the 58/15 LT made in USA pickups, I'm going to put them in an SE mahogany/maple guitar. If I don't like that, I'll put them in a USA S 594. In any case it will be a lot less than a core model. I just think $4300 is too much for me. They do sell a lot of them though!! JMHO's 8) --gary
I did the same but with SE 594 standard. Bought the USA 58/15 LTs and also a set of vintage PRS locking tuners, I read that the tuners will drop into the SE Vintage style tuners. Not sure but got a great price on them, so if they don’t, I don’t get dinged that much.
@@dubster82 Your correct, my bad. 8( It's the US "S" Thinline 594 that has the "pattern thin" , and the US maple/mahogany "S" 594 that has the pattern vintage. Right church, wrong seat. LOL Sorry...
Lee, Rest assured that we can hear the tonal differences you are referring to. It is not squelched out of our input feed. You can hear warmer brighter muted sounds from the guitars as you play them. We dont get it full in our ears like you. I believe it hits at what we can really tell as easilyfar as nuanced between the lines/models. The difference between the SE and Lees 10 top were minimal and could be EQd easily. LEE, please ask Paul to TMDCSE in Purple Iris PLEASE!!!!!!!!!!!!!!
Got mine about 2-3 weeks ago, is exactly like the one Lee is playing at the beginning. Looks absolutely amazing, high quality look but was way out on intonation, couldn't play a chord that didn't sound horrible. I fixed it as far as I could but ran out of bridge space to keep moving back. Sweetwater has now to see if it can be fixed, hopefully the bridge is not set wrong. It measures the same distance as my les paul which should be further from the nut. I don't know 😕
That sgt is impressive, id allready bought a silver sky se though. Havnt seen many of the sgt in my area. Oh well maybe later il run across one. That 594 looks great, havnt played one of them.
The double cut burst is the one I want. I did want the SE David Grissom but when I saw it had a blacked out back, I changed my mind - screams "cheap guitar". Too bad too, I think I'd like the DGT neck and pickups a little more. BTW that's still the Gibson scale length - it's always rounded off to 24 3/4".
You can hear the difference between se and usa through good headphones. Pete is correct. Usa is brighter and there is a little something extra in the mids. The se line is fantastic though and sound great as well. I own one of the old se custom 22 semi hollows from before they changed the logo and added the vibrato. I love it.
Evidently I own 2 discontinued models of PRS. The old Singlecut and the 245. I want a McCarty very bad. I just can't decide which model, the double or single cut.
I absolutely love the way their stop bar tail piece looks
Without fail… the jams with PRS guitars are always the most melodic, no idea if it’s the way they play or sound that inspire you to play like this when you do PRS
Danish Pete's improv is amazing as always! But man, The Captain's lines were like a sweet lullaby to a child I had to listen to it again. That Bb near the end was spot on! Fun stuff as always, gents!
@@glennlilley8608 Nope.
I was checking out SE245 all day and now this video comes out? It is a sign from the universe.
You gotta get one now
I gotta say the wrap around tail piece on the 245 is really nice if you do end up springing for it.
@@RubbelisPro there is a nice deal on it right now so I am going to test it locally tomorrow and order if it turns out nice😊
Get an Ibanez, they're better and just around the same price but has a lot more quality. 👍👍
Without a doubt.
Fair play The Captain, possibly the best intro jam you’ve done yet! Short, sweet and melodic. Good job !
most improved guitarist in the last 5 years ./ . . . what transpired?
Between this one and the SE DGT, we are in for a treat this year with PRS !
I keep coming back to this video, over and over. Lee and Pete, that jam out just resonates with my soul. !!!
Man, those things sound great! PRS tone and quality at an affordable price? Seems good to me.
I like the sound, the resonance of this guitar. I definitely need that McCarty 594 SE. and the design. I love it!!!
The bigest difference between the single and double cut is the strap mounting point is in a different position. Double cuts generally balance slightly better, though i'm sure that there is some personal preference in this too.
Really enjoy your videos. I can see you guys enjoy what you do, plus you have the knowledge and skills.
A minor detail that I’ve always appreciated was the shine glowing off of PRS SE pups. It’s a completely aesthetic detail, but really flashes the quality PRS puts into every detail.
What? All manufacturers that use chrome pickups are shiny. These are no shinier than Epiphone's chrome covers, or Ibanez, or ESP, etc.
Completely nonsensical...
I just got my SE 594 two weeks ago and am loving it. The pickups are wonderful, and the coil taps are much better than any I’ve experienced before.
I bought the double cut version. Its my favorite guitar now.
I love my PRS McCarty 594 SE double cut in faded blue. I need a single cut to go with it. This is a great guitar. Get one.
SE guitars are really cool, I teach lessons during the week and I use an S2 594 for my lessons. I use that guitar between 6 and 8 hours a day 4 days a week. It plays great and it gets the job done, but my pickup selector has broken off due to wear. And my one of my coil splits stopped working, plus the knob has been stripped off the tone pot. I am in the process of replacing my electronics with the PRS core stuff. If you use a guitar as much as I do I would consider this information.
Maybe consider owning more than one guitar if you rely on the instrument to make a living?
@@markrist-vt2qr I have several, that’s funny. But I do notice a difference in quality. Remember SE did stand for student edition. Haha
Captain, you had me at hello on just that short sweet solo to open the video. Such beautiful expression, feeling, and articulation and your vibrato is just WOW! Best regards from a friend across the pond.
Absolutely love my MCarty 594 but always concerned with the possibility of injury to the guitar. The SE is my answer. You guys play Absolutely 💯 👏 🙌
still £1000 of guitar but less painful than the full fat version 😬
@MarkItZero my 594 is a ten top so this is a way more affordable ouch if it gets any damage.
@@brittanykelm480 yes that would be expensive 😬 these still look like lovely guitars though
Yes! I needed to hear this as I have to practice more constant and organized on weaknesses specifically more theory. You and Henning have led me to the amzing gear I have today I which has motivated me to play way more however easy to be distracted so hearing this helps immensely!
I’ve got one on the way now. Double cut in vintage sunburst. Only 6lbs 10oz!
Love both my 594s - a 2016 Core Double Cut (bought from Andertons LOL) and my most recent 2019 594 Double cut Hollowbody version (my Avatar pic) and both are exceptional instruments. The Pattern Vintage maybe a bit 'chunkier' than other PRS necks, but to me, it feels like its 'broken in', worn asymmetrically over 'years' of playing to fit my hand perfectly - not 'new'. The rolled edges always help but the carve too helps more.
The DC does allow a bit more higher fret access. Its not just the fact that the top section joins the body at a 'higher' fret, but that also means the 'heel' is further back allowing a bit more 'neck' before it thickens to the heel. Not to say the Single Cut doesn't have decent access and the scoop on the cutaway does help their too but there is a difference. I think it does make a difference in the tone too.
I think its great that now more people can now get these 'amazing' vintage inspired guitars. They may not be 'as good' as a Core, not the 'best' Pups, Pots, wires, fret wire, nuts, tuners etc that you can get with a Core, but they certainly aren't a 'quarter' of the guitar for a quarter of the Price. Smart 'compromises' to save on the cost - like overseas production to 'save' on the labour and overhead costs, veneer to save on 'pretty' wood costs, shallower carves to save on 'Hands on' time required to sand/finish those guitars etc. According to PRS, a Core Violin carve takes a lot longer to train someone to sand after CNC than an S2 - 3-4x longer so 1 person can't get through as 'many' per day and/or costs 3-4x the labour cost in time. 1 per hour or whatever the 'hourly' pay or 1/4 of an hour to do an S2 so only a quarter of a hours labour cost per guitar. Its a 'smart' compromise as its not compromising the playability, the features, the reliability etc to sell at a lower cost...
Awesome stuff! The 594 is my fav PRS design simply for the fact that you get 2 volume controls 😄
I was turned away from the screen when he switched to the double cut, and I agree, it's def a bit brighter. It has its whole own tone, and I totally love it!
i just bought the double cut.. same color burst with lee. such as magical guitar!
SE’s have come a long way since the flat top SE Santana with weird looking inlays. These 594 do sound and look good.
Still dig'n my SE 594 Vintage Sunburst PRS after several months of playing.
As an amateur pickup winder, I'll speculate on one reason why the Core PRS sounds brighter and more complex than the SE version: While the pickups might have the same spec on paper (low 7.2k wind, A2 magnets), the baseplate and covers are probably made from different materials to save costs. I'll guess the Core pickups have nickel silver baseplates and covers, while the SE versions have brass baseplates and either nickel-plated brass covers or nickel silver covers with copper underplating (guesswork on my part, not having inspected either). Both of those changes will subtly roll off the highest frequencies - where the open complexity lives - resulting in a slight cutoff at the top end. Other factors will influence the tone, including the wood and overall construction, but the pickup materials absolutely will make that specific kind of difference.
Can’t say about the covers, but the baseplates on the 58/15 LTs are brass.
There's a good video on the PRS channel with Paul talking about how they build pickups. There's a lot that goes into the core pickups that they can't replicate exactly with the SEs
What about taking off the covers?
As pete mentions, the look of the USA 594s with the gold pickup screws is really a nice touch so that's one of the first things I did on my faded blue McCarty 594 SE is I put gold pickup screws in, I took some steel wool to the pickup covers to give them a sort of brushed look, changed the pickup rings to the somewhat more rounded PRS core model pickup rings(actually just drop right in, which is nice) in ivory since the black ones just threw off the vibe. Put some locking kluson tuners on, and switched to some clear knobs instead of the black ones. Looks as good as it plays and sounds now.
I just picked up a Vintage Cherry SE 594 Single Cut today from my local guitar shop. $699! I was actually looking for an SE Paul’s Guitar but I couldn’t pass on the SC 594.
Great guitars. But my man with the finger tone is FREAKING KILLING IT. sounded so good.
I love these models , the Amber burst is definitely my favourite finish .
Dangit! I just picked up an se 245 vintage sunburst!!!
7:55-8:20 you guys are so funny! You make my day always! Cheers from 🇨🇦
Wish you guys would put a clock on the wall. I'm always intrigued as to what time you're filming
Bruh, the double cut sounds SICK!!!
That red one that Pete is playing to start is gorgeous
Late to the party on this, but I just wanted to add the red single cut Standard version is more impressive in person. Just tried one at GC and really liked it. I don't usually like the thicker neck profile, but it really plays nice. Way better value for money than the Core line. (Although admittedly the Core models are beautiful to look at.)
5:20 fun fact: the old ‘58 and ‘59 Les Paul that Paul Smith measured were 24 and 19/32 inches, which is 24.59375”, so they round it up to 24.594, hence the name 594 ;)
I love that red standard!
loving the call and response boys at the end.
I ordered mine yesterday. I got the single cutaway like Pete is playing but in the black gold finish. I'll have it on Friday.
Thank you paul
I have two 594 cores and they are amazing, I sold all my Gibsons for these two and they are the perfect les Paul style guitar. If these are anything close, they will be killer at that price.
I would not sell my Les Paul Custom because I have a McCarty 594. There is enough of a difference. The LP weight causes the diving neck forward when sitting with it and it has heavier creamy sound. Yes I don't play my LP as much as I prefer the more balanced sound of my 594 but it's still nice to have but that is me.
Should use Lee's 594 in videos more. It sounds great!
at the 18:40-19 min mark, comparison, the SE is actually brighter than the core, the opposite of what Pete said.
Gorgeous backing track intro and wow, Lee, lovely demo of how less really IS more!
Dang Lee. That intro was super musical. Well done sir.
Love my PRS SE!
So what’s better the solid or single cut
More great guitars, I learn a lot from this channel!
Beautiful and great sounding guitars. Serious question for Pete: If you were gigging one of these, would you keep or change the pickups?
I have two artist package 594s, both singlecut, one with HB’s the other with soapbars. I recently purchased the SE SC594, and it really is surprisingly close to the cores. As they mentioned the SE is a little more compressed with a touch less high end, but maybe a little more mid bite. Which makes the SE work a bit better for just rocking out.
But I do plan on sanding down the SE neck. The finish just doesn’t feel as good as the cores. But to be fair the soapbar has a bare rosewood neck. And nothing beats that. :)
I LOVE how the tops came out on these
Lee A's playing just keeps improving.
I'm clearly gonna have to get some lessons.
Love that they did this, great video guys! I was hoping the double cut color would be closer to the factory image but hey, get watcha get. They still look amazing!
Hey Andertons, how about occasionally adding a metric that nobody else seems to, which is a spectrum analyzer. With compression at your end and at youtube, it’s not always easy to tell. It would also possibly answer some questions about wood.
I see in a lot of reviews, you talk about the richness and depths of particular guitars, without explaining why that isn’t always a desirable quality. It’s worth commenting that on G&L strats, they opted to go with a a bass cut as well as a treble cut on the tone controls. I don’t think less experienced players realize that sometimes a narrow band which gets your frequencies out of other band members way is an advantage to the bands overall sound. In a studio frequencies are regularly shelved, sometimes starting with a less expansive guitar can be a good start. Something which may not be understood by people looking for a guitar or amp that can fill a room, rather than fill a slot when sandwiched by a band
when you guys are jammin its cool you notice when the other guy is into a wicked improve idea like when at the end jam pete playing with his fingers pullin the string to a long drawn out bend.Oh the first groove you guys were playin over had a killer drum well ah groove again and the chord selection was awesome to i would of murdered playin some long drawn out bends to it but great stuff really right on.
I just got the McCarty and it is so sweet!
at about 13 minutes in It's nice to see the foreshadowing of Epiphone's inspired by gibson custom guitars that have been coming out this past year.
also at 15 minutes, pete mentions he feels that the neck on the maple topped double cut feels chunkier than the standards, and it is! it's by a small margin, but someone I watched did measure the necks and the maple topped versions are just a hair thicker necks across the board, for whatever reason.
My god, captain, such sweet licks. Nice.
Watch you guys religiously! Just bought a SE 524 standard cherry burst. Send me something to compare it to as I’ve always wanted to start my own TH-cam channel. Just don’t have enough gear. And have never won a thing! Haha.
Still waiting on my PRS SE McCarty 594 in faded blue that I preordered a little over a month ago. All I've seen from reviews on TH-cam is praise.
the surface vibrations have more surface area to cover on their way to the pickups in a single cut. a double cut has less surface area from neck joint to pickups this acts as a natural focus of vibrations in a tighter run to the pickups as there is less wood to diffuse or dampen vibrations if there was a way to measure strength of vibration on a surface I imagine the meter would show lower level vibes ib the single cut as you venture further from neck joint Pauls gift is the face he can wind those pick ups to compensate and pull more from the string action to compensate for less body "ring" just a thought
Captain what an intro Man!
I got to try these and the DGT at the show recently, And honesty although the DGT is great I found it slightly too wide E to E whereas this mCarty was lovely!
I own one of the second production year, original McCarty Core model guitars. They did have the slightly thicker body and lower output pickups over the "normal" PRS guitars. It has a control layout just like the other PRS guitars....1 volume, 1 tone w/coil split (the first coil split was no where near as nice as the newer designs!) & a 3 way toggle in the older PRS standard positioning.....and a 25" scale length. Plays and sounds Great (except for that older coil split... losing so much volume!) and I do prefer the control layout on the older version.... just personal preference! I've never liked the dual volume, dual tone control setup.
Good Morning Guys all the best to you wish I was residing in your area would have paid a visit for sure. Your place is a Creator's Heaven world .... My collection of Guitars is reaching to 50 and all because of Danish Pete who is one of my favorite Guitar players .... Cheers from Los Angeles.....
are the pickups Alnico II or Alnico V?
Hi! I'm Paolo from Italy. Gorgeous guitar also in the studio edition... my favourite with Gibson les paul, sg and prs santana... only pity: 22 frets... with 24 would be more than perfect (forgive my english... io parlo italiano/je parle francais) thanks for your recensions!
Great jam fellas! PRS YES!
I see Lee has already changed his board...great jams!
How long have they been sitting on this video? The pedalboards have been different for about a month or so.
Is the SE violin carve the same as the core?
Looks amazingly like any other PRS from the last 20 years 🤔
I wonder if 2023 will be the year of the 594 SE, like 2022 was the year of the Silver Sky SE. 🤔
I’m guessing DGT SE will win the spot.
I finally got to plug one of these in today.
I was extremely impressed. The tone, feel and sustain were very gibson-esque with phenomenal playability.
Probably see one in my future.
Don't think you can get much better for the price. Schecter would be the only guitars that may come close in value, I have the same wine red 594 singlecut in this video. Guitar absolutely sings and stays in tune for the 600$ and change I paid for it. Perfect guitar to start on/gig with if you're already an established guitar player.
but can that sonic or tone difference be offset by a change in pickup in the SE?
Pete nailed it!! The SE 594 with the maple cap has a 50's vintage neck carve. The SE 594 with just the mahogany body has the pattern thin neck carve!! Pete recognized it right away! They may have been going for more SG feel?? Anyway.. I bought a set of the 58/15 LT made in USA pickups, I'm going to put them in an SE mahogany/maple guitar. If I don't like that, I'll put them in a USA S 594. In any case it will be a lot less than a core model. I just think $4300 is too much for me. They do sell a lot of them though!! JMHO's 8) --gary
I did the same but with SE 594 standard. Bought the USA 58/15 LTs and also a set of vintage PRS locking tuners, I read that the tuners will drop into the SE Vintage style tuners. Not sure but got a great price on them, so if they don’t, I don’t get dinged that much.
According to the PRS website they both have pattern vintage carves
They all have the same neck profile. To get the Pattern Thin you have to go to the S2 McCarty 594 Thinline, which is what I ended up doing.
@@dubster82 Your correct, my bad. 8( It's the US "S" Thinline 594 that has the "pattern thin" , and the US maple/mahogany "S" 594 that has the pattern vintage. Right church, wrong seat. LOL Sorry...
@@Claimjumper55 My bad, sorry. How confusing. I had better triple check before I hit the "buy" button! Thanks!
1:13 Yeah, that was a great note.
Lee, Rest assured that we can hear the tonal differences you are referring to. It is not squelched out of our input feed. You can hear warmer brighter muted sounds from the guitars as you play them. We dont get it full in our ears like you. I believe it hits at what we can really tell as easilyfar as nuanced between the lines/models. The difference between the SE and Lees 10 top were minimal and could be EQd easily. LEE, please ask Paul to TMDCSE in Purple Iris PLEASE!!!!!!!!!!!!!!
Pete could make any Guitar sound great!
LOL, Pete looks like he was up too late and had some hair of the dog going on! Keep up the great Vid's, Your friend from the US, love the show!
I can't decide between the prs SE 594 and the se DGT for my first big boy guitar.
Got mine about 2-3 weeks ago, is exactly like the one Lee is playing at the beginning. Looks absolutely amazing, high quality look but was way out on intonation, couldn't play a chord that didn't sound horrible. I fixed it as far as I could but ran out of bridge space to keep moving back. Sweetwater has now to see if it can be fixed, hopefully the bridge is not set wrong. It measures the same distance as my les paul which should be further from the nut. I don't know 😕
That sgt is impressive, id allready bought a silver sky se though. Havnt seen many of the sgt in my area. Oh well maybe later il run across one. That 594 looks great, havnt played one of them.
Do you prs guitars sweet spots stop around 18 fret???????????
The Capn needs his reverb back! Liked the wash...
Great video. I never knew Paul and ted collaborated way back in 1994 to make the mcarty594 🤔
Got my eye on the DGT SE video that andertons will eventually be doing
Beautiful 😍 sound
Seriously tasty! 😎 But the SE I'm really waiting for is the DGT! I can hardly wait for the Gold Top I've got on order at Andertons to arrive! 😀
I used to have a USA (Core) DGT which I now regret selling. It was fantastic and very versatile.
Congrats 🎉
The double cut looks especially nice
The double cut burst is the one I want. I did want the SE David Grissom but when I saw it had a blacked out back, I changed my mind - screams "cheap guitar". Too bad too, I think I'd like the DGT neck and pickups a little more. BTW that's still the Gibson scale length - it's always rounded off to 24 3/4".
They sound the same to me. For the different in price, the SE all day long.
O my goodness the captain on a roll with Pete coming after your little sister and rubber gloves 😉
Lee is Just getting better and better
You can hear the difference between se and usa through good headphones. Pete is correct. Usa is brighter and there is a little something extra in the mids. The se line is fantastic though and sound great as well. I own one of the old se custom 22 semi hollows from before they changed the logo and added the vibrato. I love it.
Evidently I own 2 discontinued models of PRS. The old Singlecut and the 245. I want a McCarty very bad. I just can't decide which model, the double or single cut.
Based on the specs online the only guitars that still have the 24.5 scale are the Santana models.
Is there a SE Standard and SE Custom version?
Sweet intro Captain!