ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Installing the JG Speedfit Underfloor Heating Manifold
ฝัง
- เผยแพร่เมื่อ 13 ก.พ. 2013
- The installation of the manifold is an integral stage of a heating system. The JG Speedfit manifold kits can be used on either underfloor heating or radiator based systems.
Manifolds consist of two rails; one for the flow and one for the return, complete with ball valves and drain / filling valves.
JG speedfit manifolds are complete with pre-fitted brackets and vibration isolation mounts.
They are available to buy online at www.tradingdepot.co.uk
it's so nice. I learn a lot from these hope that I will do it practically one day.
very helpful thank you
Good looking bits, nice explanation
👍Gods djoupe
We have plenty of helpful videos available on our Trading Depot TH-cam chanel, offering better insights into the products on our website. Here is a handy step-by-step video on how to install a John Guest Speedfit manifold. The JG Speedfit manifold kits can be used on both underfloor heating & radiator based systems.
They are available to purchase online from Trading Depot here: goo.gl/djYq8o
do you have a supplier in Canada?
Trading Depot l
que buen video
Nice explanation thanks
bravos
Do you really run 60°C through your underfloor heating? In our installation a safety switch cuts out all pumps if the temperature should ever go above 40°C (water is mixed near the pump in the basement). Typically it runs between 30 and 35°C.
Max 45. But yeah, 60 it s way too high
How does it interact with the boiler, I mean hot water in, gives off heat then get reheated, and back into system then....
Que funcion tiene. Saludos.
Hi - my system worked fine until I messed up when I made a change to the Aura wireless thermostat. Now the UFH works but I can't get the radiators to come on (these do not have thermostats on each radiator). I must have set up the two aura thermostats wrong, but can't work out what settings I need to enter after reboot.
Zor
I live in Nigeria work on plumbing system technics
الله ينور يامعلم بس عاوز سوال منك ممكن
Boiler thermostat cutting out frequent,ly what are the possible reasons
Hi Neville,
Unfortunately we aren't technically trained on the product here.
You would best directing this type of query to the technical team at JG Speedfit.
www.johnguest.com/speedfit/technical-support/
Or by phone: 01895 425333
Kind regards,
Trading Depot
Devitis
Deavitis
I have UFH with this JG manifold operating with a flow of about 50C. What should the mixer valve setting degreeC be during normal operation?
Is there an installer/agent for these systems in new zealand? thanks
Tim Orum Hi Tim,
You would be best directing that question directly to Speedfit themselves. You can reach them here: www.johnguest.com/contact-us/
Kind regards,
Trading Depot
Tim Orum just do it the other way round
Why fill the loop **then** pressure test? If after filling the system it is pressurized then if there's a leak somewhere the pressurized water will cause damage... Air testing should be done before filling.
shut off valves need to be before the pump, not after
plaise ..if you can..trading in arabic
Le plancher chauffant est d’un autre temps maintenant, il y a nettement mieux à présent.
ا الغرب وين والعرب وين
n
Le plancher chauffant est d’un autre temps, il y a mieux maintenant.
س
push fit connections.... meh