Just a suggestion. If people don't know there is a speaker mod and you label your video as a "tear down" when they see you unsoldering and resoldering a wire it will be confusing. You had the audio on so explain why you are doing what you are doing. It's just helpful that way.
Porque mi radio baofen 888s se escucha otra bos no se entiende como que bien raro no se entiende lo que la otra persona abla como solucionar este problema porfavor
El cambio de los puntos de soldadura aumenta el volumen. Mi argumento fue que sí, fue un desmontaje de la radio, pero también hizo la modificación del altavoz. Debería decir en el título que es un desmontaje Y una modificación del altavoz para aumentar el volumen del altavoz. Aliviaría la confusión.
Good illustration of how circuit boards are not as fragile as some might believe. If the manufacturers make them too cheap, they'll die too fast and the resellers will send them back. I've had five of these for years. Recently went through them all for functionality. All good, reprogrammed all five. Amazing quality. They are pretty well sealed, so even the controls don't get scratchy. BTW, poor mic performance is generally a result of exposure to heat (like a hot car). Time to reorder! These are a real workhorse.
El volumen es mas bajo porque lógicamente se conecta el positivo a la salida del jack de audífonos, dudosamente el audio sea mejor... pero vamos, valía el esfuerzo intentarlo... muy buen video amigo, sigue con ello!
First of All, I Love Video Because You Didn`t Fake The Soldering part, You Didn`t Cut The Soldering part and show that You soldered the wire in like 0.01 Second like ALL the viral Videos Do, Soldering Is NOT THAT Easy, its tricky , you cant just put it on a part a part and think that itw ill melt it in 0.01 Second, You need to wait a time, few seconds and at the same time you need to worry about wrying componends on boards, all the ic's and smd's , its actually pretty hard thing to do, i solder since im 8, im 32 at the moment and i don`t solder that well as shown in viral videos :D . thank You for showing that.. Question, What Was The Audio Mod About? Like? Louder Or Something?
bought a couple of these and have tot say for the money i am very impressed,took a bit of time to get the right software,although chirp does do the job it does not give you all the functions,,but for the money would buy some more and the range is impressive also.
thank you for the video ...... i get my radio baofeng bf 888s but the probleme is whene i get the powerd ON and puting the radio at the table some time the PTT work alone without pushing .....plz what i have to do?????
question: What type of tool do I use to remove the antenna nut / volume nut? I mean real tool for that type of washers. I want to make a tool kit for my radios and want to put things together.
Ik gebruik ze nu dik twee jaar, en ben er erg tevreden over. Ze presteren over het algemeen beter dan de meeste kenwoods waar ik mee gewerkt heb. Wel heb ik de laders omgebouwd. USB charger moduultje ingebouwd ipv de standaard print. Vandaag hebben de BHV-ers op het werk ze vergelekenmet hun set, en besloten dat ze ook voor dit model gaan! De kenwoods hebben niet over het hele terein dekking, de bf-888S porto's wel :D
Ronald Delvax leuke reactie. Dank je. Ik vind ze ook prima presteren voor het geld. Ze hebben ongeveer 1,6 tot 2 watt zendvermogen en komen daardoor wel verder dan de Kenwoods met 0,5 watt. Ik heb een partij Kenwood protalks TK3201. Moet zeggen dat de audio en modulatie gewoon stukken beter is dan de baofengs. Maar ze kosten ook behoorlijk meer. Daarom voor het geld een aanrader.
Cam you help me? My problem is that the voice prompt keep announcing the channel it is on without anyone switching the voice. Once, my friend was about to throw the radio because of that. I tried to remove the prompt but it is replace by loud beeping sound. This is not the only time I have experienced that. It there something wrong with the channel selector?
I have a Retivis h777, that seems to not transmit. The red light does come on. I'm such an amateur, I've no idea what to check. I also don't have a computer with software to do any programming. This is a work radio, and I'm tired of someone always having to use the "broken" radio. Any suggestions? TY
Thanks man, I was wondering, whats holding me on top of device. Nah, I should see those three nuts there. Shame on me. Now just find whats the reason for low mic sensitivity on my 777s. New 888s (arrived just yesterday) seem working fine.
I set up both 777 and 888 same way, so I think there should be issue with mic, or as you wrote, mic hole. Btw, what is the right setting for PMR channels? FM/NFM and wide/narrow band? Just to learn something new. Also I checked your forum/webpage, and I like that charger mod. It is also great for using in car, or even outdoors with power bank as source. Thanks also for this. I just think I am stupid, not to come up with same idea..
+Radoslav Gulik PMR is FM Narrow. Everything else is WIDE. On the Narrow band the Deviation of the transmitter is much smaller wich gives a tinyer audio. So on PMR-> narrow, everything else Wide. If you like my charger mod wait a few weeks! I am busy with a even greater USB mod on the 666/777/888 and later the UV-3R. I am awaiting some parts from china and i will do a video of the modification when it's done. ;)
Hello I have two of these walkie talkie but one of them I can send and receive but the other one I can only talk I can’t hear the other side although the red led is on (indication of the other side is talking) can you help me
@laagvlieger6: Did you made pictures of the teardown? i would like to patch the pcb of this radio to make it legal for PMR446 (500mW ERP). As far as i know there is no software setting that can adjust power like in other baofeng radio's. Attenuation at the antenna port would be a stupid idea, losing RX sensitivity. Kind regards, Mathijs
+Mathijs van den Berg Kan gewoon in het Nederlands hoor ;). De 888 zal nooit legaal worden op de PMR band. PMR vereist een goedkeuring. Dus je kan wel een vaste antenne maken en het zendvermogen verlagen nog blijft het niet toegestaan zonder het europees goedkeuringsnummer erop. Beter dan gewoon een goede PMR kopen (Zoals de Kenwood TK3201 uit mijn andere filmpje) welke veel betere prestaties geeft dan een 888.
+laagvliegerv6 ah jammer! Ik ben al opzoek gegaan naar de richtlijnen betreft PMR446, maar kon geen eenduidig antwoord vinden, behalve dat een externe antenne is toegestaan, en een maximaal vermogen van 500mW ERP en kanaalbreedte. Als er anno 2015 apparaten geschikt voor PMR gekeurd moeten zijn, is het natuurlijk overduidelijk dat een chinese porto geen goedkeuring heeft (China Export CE keur)
+Mathijs van den Berg Antenne mag niet demontabel/verwisselbaar zijn. Extern mag. Maar dan met een vaste niet demontabele kabel. Naar ik weet zijn er 2 toegestane PMR apparaten met externe antenne. Dat heeft alles te maken met het 500 mw ERP verhaal. Zet je er een andere antenne op met een hogere versterking dan ga je over de 500 mw ERP (Effective Radiated Power) heen. Vandaar de vaste antenne verplichting.
So.. seven years later I now know how to undo screws and change a soldering point, you didn't like it. One thing I learnt is how to open it without breaking the case.
I have a BF-888(s) and I accidently pressed the PPT button on an external mic just after the radio had said "Please change battery" and now all I can hear is a quiet static sound. Nothing works, nothing. No voice or anything. PLEASE HELP!!
Hello! I know this video is a little old, but I recently purchased these radios and am having issues with one of the mics. The light turns red on the one in use and green on the one being transmitted to, but i can't hear a voice at all. Any idea as to how to fix this mic issue?
We use this model at work. We have problems with the headphone a lot of times where i can hear others in the group but they cannot hear me. After we changed some new headphones they worked fine. But new problem occurred. One unit is doing the same thing even if we take off the headphone. I can hear others but others cannot hear me. They do hear that someone's trying to speak but cannot hear what they are saying. Does anyone have a solution for this problem?
Silent movies went out of date in the 1920's. If you can't explain why and what you are doing, how do you expect others to follow your lead? You should have opened the mic hole while it was apart, that is what gives better transmit audio.
I need to ask something, I bought 3 like 5 months ago and they suddenly began to turn off and on when im using them. I cant take off the main board to look if something is making false contact or in bad condition. do you know what could it be? the turn off and on is quick and when Its in diferent positions it makes it
@@laagvliegerv6 I just fixed mine. There were cold solder joints on the power switch. I had to desolder the antenna and the large battery terminal from the PCB, and then the PCB comes out. Then resolder the power switch.
Can anyone help me about how to connect the 10 valky talky with each other bcause only 2valky talky is connected with each other but cant connect with all valky talky so plz does anyone knows how to connect every 10 valky talky with everyone
Weather seal? Liquid tape ® brush it on the shell haves as it goes together. And find some o rings . I buy bulk. So all get a helping hand. And when I go camping I have a bag with some zip lock® bags for the hard rain. Ist gut. Ja? Danke.
Hello, can someone give me help, I can not program the other frequencies, or get communication with the PC, but we are constantly reporting the error as if it does not, I have another BF 888s and it without problems can be programmed, but this will not at all, so I think that as for the USB cable that is correct and settings in programiranju.Pa am now interested in why exercises others can not be programmed.
+Marin KOJIĆ I need some more information: Which software do you use? Is the programming cable all the way in the connector? Did you choose an inactive channel when programming? Are you using the same programming cable as the other working baofeng radios?
+laagvliegerv6 Hello, it's about to have with me two BF 888s and one to program without any problems and the other when you want to program throws an error (Please check all connections and communication port settings.)
+laagvliegerv6 To believe that it is defective in respect of only programming, because everything on it is working properly, the only thing that can not be programmed. Thank you for your help
Whats the problem with these.. Bought a set of two to compliment my other PMR446 radios, but no way to talk to them, its a joke. Its chatter on the cheap PMR446 radios, but nothing to hear on these buties
@@laagvliegerv6 Thanks, I will buy a programming cable, install software and see what happens. One good thing is the Baofeng has a n antenna plug :) Thanks again
Amico, sono un neofita, ho acquistato 2PACK BaoFeng UV-16 Max V2 10W High Power IP68 Waterproof Walkie Talkie Support Type-C Charger Long Range Radio Upgrade UV5R PRO ma riesco a colloquiare solo fino a 500 metri, necessito di almeno 10 km. Sbaglio qualcosa o non è il modello giusto (questi vengono dati per distanze fino a 50 km. che a me non serve) Cosa mi consigli, grazie grazie
Just a suggestion. If people don't know there is a speaker mod and you label your video as a "tear down" when they see you unsoldering and resoldering a wire it will be confusing. You had the audio on so explain why you are doing what you are doing. It's just helpful that way.
Porque mi radio baofen 888s se escucha otra bos no se entiende como que bien raro no se entiende lo que la otra persona abla como solucionar este problema porfavor
Para que es el punto de soldadura el csmbio de soldadura
El cambio de los puntos de soldadura aumenta el volumen. Mi argumento fue que sí, fue un desmontaje de la radio, pero también hizo la modificación del altavoz. Debería decir en el título que es un desmontaje Y una modificación del altavoz para aumentar el volumen del altavoz. Aliviaría la confusión.
Good illustration of how circuit boards are not as fragile as some might believe. If the manufacturers make them too cheap, they'll die too fast and the resellers will send them back. I've had five of these for years. Recently went through them all for functionality. All good, reprogrammed all five. Amazing quality. They are pretty well sealed, so even the controls don't get scratchy.
BTW, poor mic performance is generally a result of exposure to heat (like a hot car). Time to reorder! These are a real workhorse.
The on/off/volume knob from a uv-5r will act as a wrench to tighten/untighten the nut for the antenna connector.
Awesome! Never thought of that
Do you have series of videos for complete repairing training of all baofeng Models
Gracias por el video, saludos desde Argentina!
is there the possibility to modify to increase the range?

They say it improves sound quality. But the only thing i hear is a lot less volume.
El volumen es mas bajo porque lógicamente se conecta el positivo a la salida del jack de audífonos, dudosamente el audio sea mejor... pero vamos, valía el esfuerzo intentarlo... muy buen video amigo, sigue con ello!
First of All, I Love Video Because You Didn`t Fake The Soldering part, You Didn`t Cut The Soldering part and show that You soldered the wire in like 0.01 Second like ALL the viral Videos Do, Soldering Is NOT THAT Easy, its tricky , you cant just put it on a part a part and think that itw ill melt it in 0.01 Second, You need to wait a time, few seconds and at the same time you need to worry about wrying componends on boards, all the ic's and smd's , its actually pretty hard thing to do, i solder since im 8, im 32 at the moment and i don`t solder that well as shown in viral videos :D . thank You for showing that..
Question, What Was The Audio Mod About? Like? Louder Or Something?
I need Complete Repairing training of baofeng 888s and uv-82
Thank you sir for this video
Thanks
Irmao , o baofeng 777s desliga sozinho quando fica sem uso , tem como tirar essa funcao?
Radtel RT88 doesn’t remove it’s antenna
bought a couple of these and have tot say for the money i am very impressed,took a bit of time to get the right software,although chirp does do the job it does not give you all the functions,,but for the money would buy some more and the range is impressive also.
Thank you ❤
thank you for the video ...... i get my radio baofeng bf 888s but the probleme is whene i get the powerd ON and puting the radio at the table some time the PTT work alone without pushing .....plz what i have to do?????
please turn off the VOX Mode.....
@@wex2355 thanks for that
the body and the batery case i think is the same as the uv b5
question: What type of tool do I use to remove the antenna nut / volume nut? I mean real tool for that type of washers. I want to make a tool kit for my radios and want to put things together.
Ik gebruik ze nu dik twee jaar, en ben er erg tevreden over. Ze presteren over het algemeen beter dan de meeste kenwoods waar ik mee gewerkt heb. Wel heb ik de laders omgebouwd. USB charger moduultje ingebouwd ipv de standaard print.
Vandaag hebben de BHV-ers op het werk ze vergelekenmet hun set, en besloten dat ze ook voor dit model gaan! De kenwoods hebben niet over het hele terein dekking, de bf-888S porto's wel :D
Ronald Delvax leuke reactie. Dank je. Ik vind ze ook prima presteren voor het geld. Ze hebben ongeveer 1,6 tot 2 watt zendvermogen en komen daardoor wel verder dan de Kenwoods met 0,5 watt. Ik heb een partij Kenwood protalks TK3201. Moet zeggen dat de audio en modulatie gewoon stukken beter is dan de baofengs. Maar ze kosten ook behoorlijk meer. Daarom voor het geld een aanrader.
Ja, het geluid is niet bepaald super... Maar voor BHV doeleinden, of bij festivals van gesubsidieerde verenigingen zijn ze ideaal :D
Cam you help me? My problem is that the voice prompt keep announcing the channel it is on without anyone switching the voice. Once, my friend was about to throw the radio because of that. I tried to remove the prompt but it is replace by loud beeping sound. This is not the only time I have experienced that.
It there something wrong with the channel selector?
I have a Retivis h777, that seems to not transmit. The red light does come on. I'm such an amateur, I've no idea what to check. I also don't have a computer with software to do any programming. This is a work radio, and I'm tired of someone always having to use the "broken" radio. Any suggestions? TY
Thanks man, I was wondering, whats holding me on top of device. Nah, I should see those three nuts there. Shame on me. Now just find whats the reason for low mic sensitivity on my 777s. New 888s (arrived just yesterday) seem working fine.
+Radoslav Gulik Check for the right settings (FM Wide or Narrow) otherwise it may be a poor mic element or a to little hole in the case.
Good luck.
I set up both 777 and 888 same way, so I think there should be issue with mic, or as you wrote, mic hole. Btw, what is the right setting for PMR channels? FM/NFM and wide/narrow band? Just to learn something new. Also I checked your forum/webpage, and I like that charger mod. It is also great for using in car, or even outdoors with power bank as source. Thanks also for this. I just think I am stupid, not to come up with same idea..
+Radoslav Gulik PMR is FM Narrow. Everything else is WIDE. On the Narrow band the Deviation of the transmitter is much smaller wich gives a tinyer audio. So on PMR-> narrow, everything else Wide.
If you like my charger mod wait a few weeks! I am busy with a even greater USB mod on the 666/777/888 and later the UV-3R. I am awaiting some parts from china and i will do a video of the modification when it's done. ;)
+laagvliegerv6 Perfect, I am looking forward to see that! I have two chargers, so I can play with both. :) And thanks also for small PMR lesson!
+Radoslav Gulik You're welcome!
Why did you make this modification؟؟؟
I don't know? Hope it all goes back to gether. Got 82, 5's they even set under my pillow. For weather news.
Can someone please tell me what screws the walkie talkie uses PLEASE????
Small TORX screws
@@laagvliegerv6 THANK YOU!!!!
Hello
I have two of these walkie talkie but one of them I can send and receive but the other one I can only talk I can’t hear the other side although the red led is on (indication of the other side is talking) can you help me
@laagvlieger6: Did you made pictures of the teardown? i would like to patch the pcb of this radio to make it legal for PMR446 (500mW ERP). As far as i know there is no software setting that can adjust power like in other baofeng radio's. Attenuation at the antenna port would be a stupid idea, losing RX sensitivity. Kind regards, Mathijs
+Mathijs van den Berg Kan gewoon in het Nederlands hoor ;). De 888 zal nooit legaal worden op de PMR band.
PMR vereist een goedkeuring. Dus je kan wel een vaste antenne maken en het zendvermogen verlagen nog blijft het niet toegestaan zonder het europees goedkeuringsnummer erop.
Beter dan gewoon een goede PMR kopen (Zoals de Kenwood TK3201 uit mijn andere filmpje) welke veel betere prestaties geeft dan een 888.
+laagvliegerv6 ah jammer! Ik ben al opzoek gegaan naar de richtlijnen betreft PMR446, maar kon geen eenduidig antwoord vinden, behalve dat een externe antenne is toegestaan, en een maximaal vermogen van 500mW ERP en kanaalbreedte. Als er anno 2015 apparaten geschikt voor PMR gekeurd moeten zijn, is het natuurlijk overduidelijk dat een chinese porto geen goedkeuring heeft (China Export CE keur)
+Mathijs van den Berg Antenne mag niet demontabel/verwisselbaar zijn. Extern mag. Maar dan met een vaste niet demontabele kabel. Naar ik weet zijn er 2 toegestane PMR apparaten met externe antenne. Dat heeft alles te maken met het 500 mw ERP verhaal. Zet je er een andere antenne op met een hogere versterking dan ga je over de 500 mw ERP (Effective Radiated Power) heen. Vandaar de vaste antenne verplichting.
www.frequentieland.nl/mobilofonie/portofoon.htm
Profesor cuando un radio portátil hytera se queda pegado que será como se repara
Hola profe cuando el radio hytera se queda sin señal q sera
Well thanks
So.. seven years later I now know how to undo screws and change a soldering point, you didn't like it. One thing I learnt is how to open it without breaking the case.
Gave up after10 secs when i didn't hear your speak ?.
+AustinPetDetective You won't understand my language.
I’m having problems with one of this. I can’t hear, only in auricular. Help me!!
Bad contacts in earphone jack.
@@laagvliegerv6 so. What should i do?
Can it be repair easily?
Open it up and check the soldering of the connector
How repiar power supply down
I have a BF-888(s) and I accidently pressed the PPT button on an external mic just after the radio had said "Please change battery" and now all I can hear is a quiet static sound. Nothing works, nothing. No voice or anything. PLEASE HELP!!
Josh Lewis maybe you fry the tx transistor
Hello! I know this video is a little old, but I recently purchased these radios and am having issues with one of the mics. The light turns red on the one in use and green on the one being transmitted to, but i can't hear a voice at all. Any idea as to how to fix this mic issue?
Do you use an external speakermike/microphone?
lexrdoy will one of the radio setting the CTCSS/DCS function ? have you check both radio setting issame ?
Esto ¿qué es?
¿Una tomadura de pelo?
We use this model at work. We have problems with the headphone a lot of times where i can hear others in the group but they cannot hear me. After we changed some new headphones they worked fine. But new problem occurred. One unit is doing the same thing even if we take off the headphone. I can hear others but others cannot hear me. They do hear that someone's trying to speak but cannot hear what they are saying. Does anyone have a solution for this problem?
My radio got static pls help me
Silent movies went out of date in the 1920's. If you can't explain why and what you are doing, how do you expect others to follow your lead?
You should have opened the mic hole while it was apart, that is what gives better transmit audio.
No it is the deviation or the mic pre amp what causes the weak modulation. Or both.... Drilling up the mic hole gives more wind noise.
Silent movies are better than no movies at all. You don't share anything.....
I need to ask something, I bought 3 like 5 months ago and they suddenly began to turn off and on when im using them.
I cant take off the main board to look if something is making false contact or in bad condition.
do you know what could it be? the turn off and on is quick and when Its in diferent positions it makes it
Does whiggling/applying pressure to the battery has any effect? And do all 3 of the radio's behave the same?
@@laagvliegerv6 I just fixed mine. There were cold solder joints on the power switch. I had to desolder the antenna and the large battery terminal from the PCB, and then the PCB comes out. Then resolder the power switch.
Can anyone know how to detached the mother board from the steel frame/housing.. I can't find any tutorial about regarding that.
If i remember it right you have to remove the screws and de-solder some points.
Do you care to share the reason for mounting the speaker contact to a different point on the PCB? Thanks
Better audio they said. But i didn't hear any difference so i put it back to original.
Can anyone help me about how to connect the 10 valky talky with each other bcause only 2valky talky is connected with each other but cant connect with all valky talky so plz does anyone knows how to connect every 10 valky talky with everyone
programacion hermano... me imagino que ya lo resolviste, o no?
❤❤❤
Weather seal? Liquid tape ® brush it on the shell haves as it goes together. And find some o rings . I buy bulk. So all get a helping hand. And when I go camping I have a bag with some zip lock® bags for the hard rain. Ist gut. Ja? Danke.
These radios are pretty tight from the beginning. Of course, once pulled apart, they are never the same. The bags are a good idea.
Can i plug the gps out??
Hello, can someone give me help, I can not program the other frequencies, or get communication with the PC, but we are constantly reporting the error as if it does not, I have another BF 888s and it without problems can be programmed, but this will not at all, so I think that as for the USB cable that is correct and settings in programiranju.Pa am now interested in why exercises others can not be programmed.
+Marin KOJIĆ I need some more information: Which software do you use? Is the programming cable all the way in the connector? Did you choose an inactive channel when programming? Are you using the same programming cable as the other working baofeng radios?
+laagvliegerv6 Hello, it's about to have with me two BF 888s and one to program without any problems and the other when you want to program throws an error (Please check all connections and communication port settings.)
software windows 7 use
+Marin KOJIĆ And it never worked before on that specific radio? If so then it is defective.
+laagvliegerv6 To believe that it is defective in respect of only programming, because everything on it is working properly, the only thing that can not be programmed.
Thank you for your help
Whats the problem with these.. Bought a set of two to compliment my other PMR446 radios, but no way to talk to them,
its a joke. Its chatter on the cheap PMR446 radios, but nothing to hear on these buties
Have you programmed the PMR frequencies and tone codes into these radio's. They do work fine on PMR when programmed correctly
@@laagvliegerv6 Thanks, I will buy a programming cable, install software and see what happens.
One good thing is the Baofeng has a n antenna plug :) Thanks again
what is the change of the speakers solderpoint for?
Sir pcb diagram can you send me
I cannot fine Software for my BF-658. Anyone Help?
+Clive A Goodwill hamgear.wordpress.com/downloads/
laagvliegerv6 Thanks for your Help - I will try this one but I have tried many. I'll let you know if this is " The One " Regards, Clive
+Clive A Goodwill Good luck!
what is a different??
I had one of that radio
yea...nice video, '''''
oi Andréa o meu g.p.8nao grava canais porque
yeah hardly a teardown
thanks . help me to open that device
Ketika cina sudah menguasai dunia.
Waste of time.
Робота з паяльником просто жахлива😂
Modifica baofeng 888
th-cam.com/video/XRxo_g4yQtU/w-d-xo.html
Amico, sono un neofita, ho acquistato 2PACK BaoFeng UV-16 Max V2 10W High Power IP68 Waterproof Walkie Talkie Support Type-C Charger Long Range Radio Upgrade UV5R PRO ma riesco a colloquiare solo fino a 500 metri, necessito di almeno 10 km. Sbaglio qualcosa o non è il modello giusto (questi vengono dati per distanze fino a 50 km. che a me non serve) Cosa mi consigli, grazie grazie