WE Luger P08 GBB full Disassemble 完全分解 Part 3 Magazine 彈匣
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- WE Luger 魯格 P08 GBB airsoft .
Part. 3 Magazine fully disassemble.
彈匣完全分解
To remove the valve first removed the screws and plate, than fill just a little bit of gas in magazine and the valve will be pushed out.
Be Careful !!! the valve may just SHOOT OUT ! if you fill too much gas.
想卸除氣閥，在拆掉螺司跟鐵片後，灌入少量瓦斯氣閥就會被推出來了
小心 !!! 灌入太多瓦斯的氣閥會整個噴出去 !!!
鋼製火控購買連結如下:
For Stainless steel Hammer & Sear purchase :
台灣本地購買:
www.ruten.com....
For International service or purchase please message us or contact "LFJ airsoft"
lfj.com.tw/sho...
or
lfj.com.tw/sho...
Hey man. Thanks alot. I was wondering how to disassemble the valve. Thank you for this informative video
Any time ~
@@REC-Research do you have any idea how to remake this thing hop up?
@@kamalarief2703 WE P08 has a hop up ~
@@REC-Research really? I thought the screws were just barrel holder
@@kamalarief2703 Something is better than nothing, Just check the manual for "HOP UP' adjustment page.
Very cool video. I see you sealed the bottom of your magazine. I have a leak there too. Did you seal it with some kind of Teflon tape and did you have to replace the seals? What would you recommend for sealing the magazine base?
@@traviannnn a original WE O ring is recommended, or just get a new mag it is not expensive at all.
Hi, I also thank you for this video. I have the same gun and you explained to me a lot of things.
Im glad this can help you~
1.30-1.32min ....why there is no video of how and with what the combat valve was removed. write with what puller you got this valve.
Actually, the magazine valve is just press fit into it and hold by the 2 screw and metal plate
To remove the valve first removed the screws and plate, than fill just a little bit of gas in magazine and the valve will be pushed out.
Be Careful !!! the valve may just SHOOT OUT ! if you fill too much gas.
@@REC-Research Wow... You know a lot of things and you explain them well. Thank you!
如果彈匣上的橡膠出氣孔會漏氣是什麼原因？
沒辦法實際檢查你的零件比較難找到真正的原因，要隔空抓藥的話會我會先猜是氣閥裡面的O環有漏氣，換一條新的O環或是新的氣閥應該就能解決，也都買的到，但P08彈匣實在不貴，就看你想修還是想再買隻新彈匣囉~
@@REC-Research 跟85號零件沒關係嗎？因為氣是從那裡漏的
@@chenhero8761 #85號零件並沒有承受瓦斯壓力，作用是在汽閥被敲開時引導瓦斯流向而已
了解，謝謝
不好意思，我還有一個問題，請問我的P08空彈匣直接上膛可以正常後定，但實際打完彈匣卻沒辦法後定，這樣子跟彈匣漏氣有關聯嗎？