YOOOOO!!!! I put back four bulkheads because i couldn't think of a way to get them to fit on my four 55 gallon drums. You saved the day buddy!! I'm going back to get them tomorrow!! Thanks a million!!
If im not mistaken Sounds like A. 1-1/3 inch drill saw B. 1-1/4 reverse threaded bulkhead with hard plastic and rubber C. 1-1/4" garden hose adapter D . 2 way garden hose splitter (Assuming your hose is 3/4") E. Teflon tape or plumbers tape F. A long string like he said if necessary.
I have done these for several people around here and feel the need to point out a couple of things. First, you never cleaned out the inner nor outer sharp edges left by the drill. Second, you slipped the cord out before even attempting to put the nut on. You were lucky it didn't slip back inside....and then have a good old time trying to recoup the bulkhead inner parts. Lastly, when you tie the 7/16 socket, you would do well to leave a 3-4" tail hanging off it to make it easier to grab from outside...with either finger or mechanical fingers.
Hi Eric, thanks for the video. Can you share the info on the size and source of reverse thread bulkhead and the adapter? I know the hole saw is 1-3/8 inches and I thought I heard Alternative Solutions as the source for the bulkhead. Thanks!
Great video, can you wash a big car or truck with 55 gallons of water I've never done it I'm just asking, but let me let you in on a little secret for those who don't know Teflon tape is just a lubricant, they put in spray cans to, it's the actual taper of the threads that keep it from leaking, two rounds of tape is plenty where did you say you got the bulkhead from thanks again Chris H. Mooresville North Carolina
It's nice to have that amount of water on hand but that barrel is going to be a bear to move once full. Your way is good but. Another way is to pop out that three quarter plug in one of the bung plugs and add a pvc fitting and pipe long enough to reach the bottom. You will need a pump of some kind or you can pressurize the tank. Keep up the good work Peace
So does this method work without any form of water transfer pump from tank to pressure washer? I would think it would gravity feed through the bulkhead-hose-to pressure washer. I’d like to do this setup with a Portland HF 1750psi electric pressure washer.
YOOOOO!!!! I put back four bulkheads because i couldn't think of a way to get them to fit on my four 55 gallon drums. You saved the day buddy!! I'm going back to get them tomorrow!! Thanks a million!!
Your video is super valuable sir. I’ll pick up one tank on the weekend. Salute 🫡
A list would be amazing 😉
Yes this needs a list it’s a good video thanks for your help
Thanks! I plan on using the same set up for RODI water but you made it much easier than I thought in my head. Appreciate the video!
Thank you for show me how to use thisI got three of these in my set up two for a water and one for a return
Where did you get the conversion kit? I can't understand where you said?
Can you list the parts needed thank you
If im not mistaken
Sounds like
A. 1-1/3 inch drill saw
B. 1-1/4 reverse threaded bulkhead with hard plastic and rubber
C. 1-1/4" garden hose adapter
D . 2 way garden hose splitter (Assuming your hose is 3/4")
E. Teflon tape or plumbers tape
F. A long string like he said if necessary.
@@altairs.6380 you goated bro thank you .
@@altairs.6380 1 3/8 hole saw
This is good. May I know the materials used. Thanks
How did you fix the barrel in the van, is it tied to the van or is there any metal components welded and fixed to bottom of van to hold the barrel.
you just saved me a ton
Do you have a water pump for this tank? How are you drawing water to the pressure washer ?
truejey 747 I’m sure it builds enough pressure to be gravity fed .
onebadalex definitely not.
@@tayjay604 definitely enough pressure I use this method
How? I can't get mine to feed enough
Hey buddy, I would’ve just put silicone and then the Teflon tape on as soon as I had the threads poking out
Good video very helpful.
Great and clever solutions. Thanks a lot !!
Where did you find 3/4 bulkhead that fits through the top? The one at HD is to large. I have 2 of the same barrel as you.
What’s the company that makes the adapter? Do you have a link?
I have done these for several people around here and feel the need to point out a couple of things. First, you never cleaned out the inner nor outer sharp edges left by the drill. Second, you slipped the cord out before even attempting to put the nut on. You were lucky it didn't slip back inside....and then have a good old time trying to recoup the bulkhead inner parts. Lastly, when you tie the 7/16 socket, you would do well to leave a 3-4" tail hanging off it to make it easier to grab from outside...with either finger or mechanical fingers.
use a pocket magnet
Shouldve cleaned out the inside of the container so the PW doesn't suck that plastic into the pump.
Would you please let me know where do I buy that barrel 55 gallon I use for rain water for garden please thanks anyway
You need to list the parts in the comments.
Thanks for the vid. It helps. Where do you find the 3/4 bulkhead fitting? Does HD or Lowes sell them ?
B Stephenson way better off getting those things on line.
Wow 😮very creative 🤝
Hi Eric, thanks for the video. Can you share the info on the size and source of reverse thread bulkhead and the adapter? I know the hole saw is 1-3/8 inches and I thought I heard Alternative Solutions as the source for the bulkhead. Thanks!
Great video, can you wash a big car or truck with 55 gallons of water I've never done it I'm just asking, but let me let you in on a little secret for those who don't know Teflon tape is just a lubricant, they put in spray cans to, it's the actual taper of the threads that keep it from leaking, two rounds of tape is plenty where did you say you got the bulkhead from thanks again Chris H. Mooresville North Carolina
Can wash 4+ cars
With 55 gallons you can do 5 cars it all depends on your Gpm and Psi your set at ..
Just got mine done thanks for The vid
What is the size of bulkhead did you use?
I like that idea. How'd it work out??
Can you give an exact parts list. I already have the drum. Just need the parts. Thanks
Law22 LAW threaded union fitting 3/4-in x 3/4-in I got mine at Lowe’s for 12.99
Law22 LAW it comes with seals and everything
dann i hey man what kind of saw is that he using to cut?
Where did you find the 2 hose valve?
@@cesarorozco2638 amazon or home depot carry them
Where can I purchase this water tank???? Please send link 😭😭😭
Wat is the name of the tool to make the hole 🕳️ and wat size is for the 3/4
Sweet that was good
What size bulkhead was that
Thread that shit on there guy.
Any idea where I could find water drums in or near Philadelphia?
It's nice to have that amount of water on hand but that barrel is going to be a bear to move once full. Your way is good but. Another way is to pop out that three quarter plug in one of the bung plugs and add a pvc fitting and pipe long enough to reach the bottom. You will need a pump of some kind or you can pressurize the tank. Keep up the good work Peace
Or let gravity do it's job
Or maybe make your own video for people to point stuff out to you if it works it works
Hey can you list the parts please
So does this method work without any form of water transfer pump from tank to pressure washer? I would think it would gravity feed through the bulkhead-hose-to pressure washer. I’d like to do this setup with a Portland HF 1750psi electric pressure washer.
Did you try it and if so did it work ?
How do it runs using 2 pressure washer that would be a nice video
Can you do an update video?
Aisa karke hum fully automatic washing machine use kar sakte hai
You not cleaning that circle up is giving me anxiety
Parts list please?
What’s this for?
What kind of adapter?
You said 1 3/4 inch or 1 3/8
Has anyone received a list yet?
f no bro
I have a cuestion?
Hola me gustaría saber si puede darme información en español
Has anyone used this set up with there pressure washer?
Hey bro how tall is the tank can you please let me know .
35 inches tall
How many cars with one drum full?
Usually 6 gallons a car for me
Hi
#VOLTINU
⚡️⚡️⚡️ volt inu crypto making millionaires overnight