Arduino Thermistor Tutorial | make a Arduino based Temperature Sensor using Thermistor and i2c LCD

code : drive.google.com/file/d/1HmSu...
Affiliate Buying Link: -
Arduino Uno:-
www.banggood.com/Wholesale-Ar...
www.banggood.com/3Pcs-Arduino...
www.banggood.com/UNO-R3-ATmeg...
LCD Display - www.banggood.com/1Pc-1602-Cha...
I2C module for LCD - www.banggood.com/IIC-I2C-TWI-...
I2C LCD : - www.banggood.com/5Pcs-IIC-I2C...
Thermistor :-
m.banggood.com/10pcs-NTC-Ther...
Previous videos :-
STM32 Bootloader | Programming STM32 using usb cable | Flashing bootloader in STM32 | Arduino IDE
• STM32 Bootloader | Pro...
RF Module 433MHZ | Make Receiver and Transmitter from 433MHZ RF module without any microcontroller
• RF Module 433MHZ | Mak...
Getting Started with ESP 8266 ESP 01 with Arduino IDE | Programming esp-01 with Arduino ide
• Getting Started with E...
IOT : ESP 8266 Nodemcu Controlling Neopixel ws2812 LED Strip over the internet using BLYNK App
• IOT : ESP 8266 Nodemcu...
IOT : ESP 8266 Nodemcu Controlling RGB LED Strip over the internet using BLYNK App
• IOT : ESP 8266 Nodemcu...
JLCPCB Review : How to design & order professional PCB for 2$ | PCB Designing
• JLCPCB Review : How to...
IOT : Getting started with Blynk with nodemcu controlling outputs over the internet
• IOT : Getting started ...
Controlling RGB Led Strip with Arduino | Arduino based RGB Led strip controller
• Controlling RGB Led St...
ESP 8266 Nodemcu ws 2812 Neopixel based LED MOOD Lamp controlled using webserver
• ESP 8266 Nodemcu ws 28...
Neopixel ws 2812 LED Strip with Arduino controlled by Bluetooth from Android or iphone
• Neopixel ws 2812 LED S...
Adafruit Neopixel 8x8 led matrix with Arduino individually addressable led matrix
• Adafruit Neopixel 8x8 ...

[@krishnawa_]

That's great with in 4 minutes you share a lot of information

[@kikokiki7493]

Thank you. Worked at first. Just changed lcd adress "LiquidCrystal_I2C lcd(0x27, 16, 2);"
Cool!!!

[@electronicGURU]

Your welcome 😃

[@aqilahzainuddin4248]

no dislike, therefore, great job sir! :D

[@asadeeshprabhakar]

very good video ...working and accurate .thanks a lott

[@ashutoshshukla6986]

Thanks so much, those having error in lcd.begin(); can change it to lcd.init(); and try! Hare Krishna 🙏

[@Richie_]

Great tutorial, thanks.

[@abhishekmaurya2]

Superbb

[@korgen6190]

is this implementing Steinhart-Hart equation? thank you sir

[@technolabcreation]

Mast sir 👌👌👌👌

[@niswanthskumar1608]

Can i use it for multiple thermistors?.... How to caliberate the thermistors?

[@electronic7979]

Useful video

[@attilanemeth8215]

Hi . Is the thermistor precise? Is it 28 degrees in your room? How can we adjust it ?

[@andrie1924]

Permission to ask, I have a thermistor that is used for the exhaust temperature, the working temperature is 350 ° C - 700 ° C, can it be directly connected to the Arduino program that you made?

[@electronicGURU]

By this much data I can't be sure but sure we can attach it but as you are saying that it will work between 350-700 so which means it can sense the temperature of that range ... For further detail i need the exact name of component but if it is a Thermistor then it should work.

[@andrie1924]

@@electronicGURU okay okay, I'll try first. thank you for sharing your experience and hope it will be useful for many people greetings from Banjarmasin, Indonesia

[@electronicGURU]

I hope you will succeed.. have a nice day. 😊👍

[@shubhamkumar-gx5vx]

@@electronicGURU Can we read temperature by multiple thermistors using a single arduino

[@salimbajraibinhuseinsalim4270]

what type of transfer fuction you use

[@aichaseghour8027]

hi sir , could you please send me the datasheet of this NTC because i can't find it

[@ilyushin78]

Minimum and maximum temp can measure??!

[@salmantahir9655]

Lcd model as well

[@nehalpatel7169]

Is there any change in code of we are using 100k thermister

[@electronicGURU]

No there is no change in code but make sure to use equal value resistance with thermistor.

[@ilyushin78]

how to use ntc 10d/9 (resistor + code)

[@electronicGURU]

i think its a 10ohm so do the calculations accordingly and update the code accordingly if its 10 ohm 100 ohm 1 ohm anything

[@ilyushin78]

@@electronicGURU ok thanks

[@salmantahir9655]

Please share the model of arduino

[@shubhamkumar-gx5vx]

Can we use multiple thermistors simultaneously using a single arduino?

[@niswanthskumar1608]

Did you got the answer?

[@boussaoudfarid8297]

Certainly, you can use multiple thermistors with an Arduino. Each thermistor can be connected to a different pin on the Arduino to measure temperatures individually. Make sure to use the required pull-up or pull-down resistors depending on the type of thermistor you're using, and program your Arduino to read analog values from each thermistor pin.

[@mangoestree3378]

Code can not run ..

[@mahmoudahmedahmed4783]

How to make control for Temperature ? if (temp >=30 C) { pniMode OUTPUT, HIGH);

[@electronicGURU]

Yeah try the logic you wrote here. It will work.

[@markandeysinghyt]

Good work

[@pammikumari7686]

In LCD only display boxes

[@electronicGURU]

which means it is not able to read the data or not understanding it please check if connection is right or you might wanna try with other lcd and try to adjust the brightness as well. it might help

[@carltamondong3328]

I2C coding doesnt work :(

[@carltheblasian5781]

@@electronicGURU I have scanned it and my address is 0x27, where can I modify this in the code? thank you very much

[@manofmesopotamia7602]

what range of temperature we can use this?

[@manofmesopotamia7602]

@@electronicGURU could we use it to measure about 300c? I mean does the thermistor stand this much of temperature?

[@doublestarsystem]

need some calibration though

[@electronicGURU]

yeah i think too, very old project so i didn't bother