VINYL VS. LIQUID WRAP | VLOG
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Today we're going to briefly show you the difference between Vinyl and Liquid wraps
Don't forget to subscribe to our channel and ring the notification bell to be updated on our latest videos! Also, comment down below on what videos would you like to see next.
Follow us on IG and FB :
@secondskinindustries
@ssi.archie
I totally get the frustration of having to remove an improper installation. But that’s exactly what you have with that liquid wrap. It was applied incorrectly, meaning too thin. The installer did not spray enough product, and now the customer gets stuck with that without knowing. Sad.
For what it’s worth, I’ve seen similar issues when people install the wrong type or cheap vinyl on vehicles. It gets brittle, cracks, and it’s difficult to remove.
The key takeaway from this video should be, find a quality, trusted installer no matter what you decide to go with.
I was told for liquid wraps you want to spray like 9 coats
Just happened to me:(
shoutout kuyssss its ur boyyy warren
Not enough liquid wrap has been applied. That's why it's hard to peel off. Simples.
Hot pressure washer takes it right off very fast and no glue like sheet vinyl
If it's wrap on a clear PPF the car will be protected from Watermarks?
Differentiate different brand of decals sir from cheaper to the most expensive thanks
boss since sabi mo matibay yung wrap kailangan pa ba ng ppf?
With the wrap that brittle, I’m curious if pressure washing would have taken it off
Looks like you are getting worried about it. That's improper application and you trying to put down a product that when applied properly is better and cheaper than vinyl wrap. You know that and that's why you made a video, because you know people are turning to liquid wrap. It's like someone applies the worse vinyl wrap brand and than cooks on the car (I have seen heaps) and then make a video blamin the whole vinyl wrap industry. You didn't show how fast you removed aall other parts? why?
I think any change in car color needs to be registered with lto.
Wraps suck removing, even under heat. Liquid wrap is easier to remove. I've seen Wraps coming off mess up the glue spots creating dents. While yes the Wraps can offer a little more protection to scrapes, but usually it needs body work from the dent it created. As for color matching, yes you'll have to paint a whole side or maybe the whole car. But Wraps usually arnt perfect color match either. The Liquid wrap in this video wasn't applied correctly as its way to thin, I'm sure pressure washing would take the rest off though. Overall I think Liquid Wraps are here to kill Wraps as I think they're far superior (protect from scratches, can do a clear bra, can even wet sand and buff some of the Liquid Wraps, leaves a finish as nice as paintjobs Can be) Wraps do have there place though where they shine compared to Liquid
Hey guys If I vinyl wrap my truck. If i want to take it off does it damage my original paint job?
There's a chemical used to take liquid wraps off your not suppose to just chip it off. Definitely more likely to damage the car with a vinyl wrap installed and removing compared to a proper liquid wrap install and removal
As I know of I think that the liquid wrap installer put actual clear coat instead of peelable clear coat on top of the liquid wrap making it brittle
Thats what happened to mine. It was so thin that it burned, I think, made it crack and matte looking instead of glossy.
I use normal clear, that’s not why. It’s because his base was way to thing. If u have enough base u can use whatever u want to top it off.
What if you make a small hole and push compressed air under it to separate it from the car
Ceramic coating and ppf pwede po ba pag patungin? Thanks!!!
Naka subs ako dahil kay torqkey angas ng pagkakawrapped nyo boss... 🔥🔥🔥
How old was the vinyl spray on the Porsche ?
Can you a video for beginners?
depende din po ba sa size ng sasakayan yung price ng wrap? thank you.
Did you try heating it up?
How much did this cost?
Very interesting👍👌💯