► HOW I BUILT MY HOME STUDIO - Course www.productionmusiclive.com/products/course-how-i-built-my-home-studio?aff=18 ► ABLETON SESSION VIEW MASTERCLASS www.productionmusiclive.com/collections/courses/products/ableton-session-view-masterclass?aff=18 ► ABLETON PUSH 2 MASTERCLASS www.productionmusiclive.com/collections/courses/products/push-2-masterclass?aff=18 ► ANALOG MEETS DIGITAL www.productionmusiclive.com/collections/courses/products/analog-meets-digital?aff=18
Hey Man, thanks for the nice feedback :) I'm glad you enjoyed! The ATX3 VCOs are still in prototype phase, not sure when the TipTop guys are ready to release those. But definitely stay tuned, they will be frckn amazing ;) Cheers, Attila
Atilla PLEASE HELP. currently doing your PUSH 2 Masterclass on PML. Desperately trying to work out how to UNmap a parameter of a VST that has been mapped to an encoder and saved as default config. can't find out how to undo it anywhere, Thanks!
No worries, let’s figure it out. I might need a bit more info, such as which VST, which parameter you have mapped to the encoder, is it an encoder on your Push 2 and how exactly you did the mapping, but if I’m correct you can undo any mappings by hitting ctrl/cmd+m, then simply clicking on the parameter in question, then hitting delete or the backspace key. Then you’ll have to re-save the preset in this configuration. Would this help? Let me know pls. If not, then can you pls describe the exact situation with the points I mentioned above in detail? Cheers, Attila
@@AttilaHanak Thanks for the speedy response. Yes working on a Push 2. Just tried your solution and it doesn't seem to work unfortunately, all parameters go purple in the DAW and i can select them but i cant delete them from the VST window at the bottom The VST is Serum, the parameter in question is the envelope 2 attack. the parameter was mapped by clicking the configure button in the top right of the ableton effect window at the bottom of the DAW, then clicking on on the Envelope 2 attack knob in the Serum GUI, parameters appear in green on the DAW until you click configure again. i have then right clicked in the bar where the configure button is located and then clicked "Save as Default Configuration" The parameter is mapped to an encoder on the push 2, i can re-order parameters to different encoders but not remove them. Using Live 10 standard 10.1.41 Build 2021-08-09_2398148aa8 Really loving your masterclass by the way! Thanks so much for the help you are the man!
@@AttilaHanak I just worked it out. you just click the configure button so the parameters go green in the ableton effect window, then select it and hit delete. although i swear i tried that 100 times, it works now so maybe i didn't. Thanks for your time and sharing your wonderful knowledge, have a great day!
Oh shoot! Of course! :D Here I was thinking VST as in an Ableton stock VST synth or effect.. I forgot to ask if it was a 3rd party one 😅 Yeah, the solution is in the little green configure window. Awesome, I’m glad you figured it out. And thanks so much for the nice feedback, I’m glad you’re enjoying the course. Let me know if you have any other questions. Cheers
► HOW I BUILT MY HOME STUDIO - Course
www.productionmusiclive.com/products/course-how-i-built-my-home-studio?aff=18
► ABLETON SESSION VIEW MASTERCLASS
www.productionmusiclive.com/collections/courses/products/ableton-session-view-masterclass?aff=18
► ABLETON PUSH 2 MASTERCLASS
www.productionmusiclive.com/collections/courses/products/push-2-masterclass?aff=18
► ANALOG MEETS DIGITAL
www.productionmusiclive.com/collections/courses/products/analog-meets-digital?aff=18
Fantastic mod synth live performance - wonderful tune with very catchy groove and great sounds!!!!!!!!!!
Thanks Vincent for that super nice feedback :)
Cheers,
Attila
awesome jam!
Thank you :)
Hey bro, amazing euro rack jam. One of the best I’ve seen. Question, I can’t seem to find any info on the atx VCo used for the bass voice?
Hey Man, thanks for the nice feedback :) I'm glad you enjoyed! The ATX3 VCOs are still in prototype phase, not sure when the TipTop guys are ready to release those. But definitely stay tuned, they will be frckn amazing ;)
Cheers,
Attila
Atilla PLEASE HELP. currently doing your PUSH 2 Masterclass on PML. Desperately trying to work out how to UNmap a parameter of a VST that has been mapped to an encoder and saved as default config. can't find out how to undo it anywhere, Thanks!
No worries, let’s figure it out.
I might need a bit more info, such as which VST, which parameter you have mapped to the encoder, is it an encoder on your Push 2 and how exactly you did the mapping, but if I’m correct you can undo any mappings by hitting ctrl/cmd+m, then simply clicking on the parameter in question, then hitting delete or the backspace key. Then you’ll have to re-save the preset in this configuration.
Would this help? Let me know pls. If not, then can you pls describe the exact situation with the points I mentioned above in detail?
Cheers,
Attila
@@AttilaHanak Thanks for the speedy response.
Yes working on a Push 2.
Just tried your solution and it doesn't seem to work unfortunately, all parameters go purple in the DAW and i can select them but i cant delete them from the VST window at the bottom
The VST is Serum, the parameter in question is the envelope 2 attack. the parameter was mapped by clicking the configure button in the top right of the ableton effect window at the bottom of the DAW, then clicking on on the Envelope 2 attack knob in the Serum GUI, parameters appear in green on the DAW until you click configure again.
i have then right clicked in the bar where the configure button is located and then clicked "Save as Default Configuration"
The parameter is mapped to an encoder on the push 2, i can re-order parameters to different encoders but not remove them.
Using Live 10 standard 10.1.41 Build 2021-08-09_2398148aa8
Really loving your masterclass by the way!
Thanks so much for the help you are the man!
@@AttilaHanak I just worked it out.
you just click the configure button so the parameters go green in the ableton effect window, then select it and hit delete.
although i swear i tried that 100 times, it works now so maybe i didn't.
Thanks for your time and sharing your wonderful knowledge, have a great day!
Oh shoot! Of course! :D Here I was thinking VST as in an Ableton stock VST synth or effect.. I forgot to ask if it was a 3rd party one 😅 Yeah, the solution is in the little green configure window.
Awesome, I’m glad you figured it out. And thanks so much for the nice feedback, I’m glad you’re enjoying the course. Let me know if you have any other questions.
Cheers