Had some free time to get the Redcat & Vanquish out for a crawl both rigs were killing it out on the rocks. Please enjoy the video and thanks for watching. Stay safe everyone.
Really enjoyed this video and I really enjoyed driving the Stance. These vehicles are both very Close when doing comparison. The Stance weights a bit more and a tiny bit more LCG. The Ascent is really great through. They did a fantastic job. It is such a great rig. It's really just as capable as the Vanquish. You can see in the video! Great Job! Enjoyed Running them with you!
The Ascent is stock except wheels and tires the Stance is stock except for electronics and wheels and tires no extra weight added to either except metal beadlocks are little heavier than the plastic.
www.ebay.com/itm/382801192605?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Vm15onJTQyS&sssrc=2349624&ssuid=i-0cNmKVTa6&var=651507063915&widget_ver=artemis&media=COPY the red box is a fuel cell receiver box from my old Vaterra ascender. There discontinued few years ago not sure if you could find one now but might be able on eBay or Amazon to find a fuel cell receiver box.
Vary nice, what a great place to crawl. About the only difference from what I see is the tires the Hyrax seem to have a little edge but they are both very strong crawler's. What mods are done on the Ascent. Cool video. Thanks
It looks like you have cut your side Skids. have you noticed a difference in performance or was this done purely for aesthetics? also did you trim your body a little? Keep crawling!
I ordered some treal beadlocks with the steel ring... are you running more weight in your fusion ascent wheels as well....? was a lil concerned about the added weight on the drivetrain.... i ordered the aluminum rings as well... still waiting for the metal gears to be back in stock.... cant wait to take mine for its 1st run.
Only extra weight so far I've added is the metal beadlocks are a little heavier than the stock plastic. The bumper weighs same as stock on front so didn't change anything there. I am going to add a little more weight to the wheels on the inner ring adding about 25g per wheel for starters see how that does.
Thanks for the response.. glad I ordered the aluminum rings.... thinking the steel would be too heavy..... seems the rig truly is tuned right outta the box.
Nice crawl! I need to find some rocks near me!👍👍👍👍
Here in Idaho Falls ID. The Ascent Fusion is pretty much unstoppable out of the box.
Really enjoyed this video and I really enjoyed driving the Stance. These vehicles are both very Close when doing comparison. The Stance weights a bit more and a tiny bit more LCG. The Ascent is really great through. They did a fantastic job. It is such a great rig. It's really just as capable as the Vanquish. You can see in the video! Great Job! Enjoyed Running them with you!
That 12.67" w.b. is a limousine.
Awesome my friend 👍💪they both crawl great
Nice trucks! I love Palmer park.
Nice video and rigs! the bed cover on the Stance was a DIY? love how it looks!
Yes had a piece of canvas laying around made a soft cover.
Are these both stock rigs? Awesome video!!
The Ascent is stock except wheels and tires the Stance is stock except for electronics and wheels and tires no extra weight added to either except metal beadlocks are little heavier than the plastic.
Will you post links for the accessories you used for the Ascent Fusion? Love the bumper and that red box in the back.
www.ebay.com/itm/382801192605?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Vm15onJTQyS&sssrc=2349624&ssuid=i-0cNmKVTa6&var=651507063915&widget_ver=artemis&media=COPY the red box is a fuel cell receiver box from my old Vaterra ascender. There discontinued few years ago not sure if you could find one now but might be able on eBay or Amazon to find a fuel cell receiver box.
Wow the wind.
Mic muff.. they are hard to find for the small mics.
Not sure about phones though.. not much you can do there..
Nice
Vary nice, what a great place to crawl. About the only difference from what I see is the tires the Hyrax seem to have a little edge but they are both very strong crawler's. What mods are done on the Ascent. Cool video. Thanks
Only changed the front bumper and plastic beadlocks to metal beadlocks other than that the rig is pretty dialed in out of the box.
It looks like you have cut your side Skids. have you noticed a difference in performance or was this done purely for aesthetics? also did you trim your body a little? Keep crawling!
Just cosmetic on skids didn't like how they hung out there and I cut a little of fender well so doesn't rub as bad
Thanks, the body does rub a little much out of the box.
I trimmed mine, too. Way better.
👍👍😎😎
I ordered some treal beadlocks with the steel ring... are you running more weight in your fusion ascent wheels as well....? was a lil concerned about the added weight on the drivetrain.... i ordered the aluminum rings as well... still waiting for the metal gears to be back in stock.... cant wait to take mine for its 1st run.
Only extra weight so far I've added is the metal beadlocks are a little heavier than the stock plastic. The bumper weighs same as stock on front so didn't change anything there. I am going to add a little more weight to the wheels on the inner ring adding about 25g per wheel for starters see how that does.
Thanks for the response.. glad I ordered the aluminum rings.... thinking the steel would be too heavy..... seems the rig truly is tuned right outta the box.
Hello, I have a question: what have you changed on the Vanquish and what oil do you have in the damper? Greetings, Jürgen
I've only changed electronics and front bumper everything else is still stock shocks and oil 30wt
I got treal beadlocks on mine with Mickey Thompson Claws.