Im 65 i hope these kids are watching and see how much care & pride you put into ur work made in USA used ta mean somethin now all it means is expensive back in day especially after WW II made in USA ment pride ,care,attention ta detail and they can see what that ment &means keep the industry goin oralã 👊👌✌️
I'm 79 & have built several street rods/macbines but never had the luxury of all the nice machines. Had to farm out a lot of things. I love watching Mike get it all done in house & doing it right & fast.
If it's Sunday it has to be Bello's Time better than going to church, Here we spend quality time with one of the great ones , Gracias Maestro por el video
Back to Sundays feeling like Sundays! Thanks Mike! So ironic this is exactly what my 36 ford needs replaced and installed...awesome! Time to take some notes on how to do things the right way!
That is so important the ones that know theyr shit they give it on to the joung generation. I like to give my knowledge to the ones that want to now it.
Had to do the same quick finger repair last week to the same finger. Wrap in a baby wipe held on with black insulation tape after giving it a good spray with antiseptic and back to work no stitches required this time.
Nice work you definitely got some skills and a high work standard. You make it look easy but I know the hours we dont see involved. Cheers from New Zealand 😁🇬🇸👍
Izzy wasnt gettin' the axle brackets, till he saw the bag mts. Old Hot Rod w/diamond plt floors (?) gettins the Bellos look and feel. Loco Chon baby,,,Izzy,,,
You do great work. Which I could afford to get my truck worked on. I used to do it myself. I am 74. I'm on a fixed income. It's just a dream. Maybe 1 day. I don't have a lot of time left. I wish I could drive one more time. I'll just keep dreaming.
Mother FN perfection puro locochon 🎶🎶🕺🕺🕺🕺🕺💪💪✊✊ no doubt in my mind that the quality is on another level homie Bello's takes pride in the work oh yeah qvo catapillo
Is that diamond plate floor from the factory?! Use whatcha got I guess. I could watch this all day. I’ve learned a lot and used it on my current build.
I have a machine shop and I’m always cutting my fingers/Hands ,so clean it with Cotten swab a peroxide when it’s dry I put super glue gel over the cut ,then hit it with the catalyst so it hardens up and it burns like hell for couple seconds .then I sand it down with 600 grit and your good to go a few days later super glue falls off .
Dude the shit you do is so inspiring I love it I'm working on a 51 chevy hard top kustom from the 60s I'm gonna be lowering soon probably with blocks wish I had the shit to 4 link your shit is top notch man I want to lower mine like that just don't have the right shit love your work homie
I dont get it. Am I wrong, or does this 4 Link construction not allow the rear axle to rotate towards the driveshaft -axle(x-axis) ? I mean the axle goes stiff upwards when you hit a stone with just one side, doesnt it?
We also have to acknowledge the work of the videographer as he captures all aspects of Mikes work and its all of great detail thought & imagination
These suspension builds never get old.
Im 65 i hope these kids are watching and see how much care & pride you put into ur work made in USA used ta mean somethin now all it means is expensive back in day especially after WW II made in USA ment pride ,care,attention ta detail and they can see what that ment &means keep the industry goin oralã 👊👌✌️
I'm 79 & have built several street rods/macbines but never had the luxury of all the nice machines. Had to farm out a lot of things. I love watching Mike get it all done in house & doing it right & fast.
I grew up here in socal, and he makes me laugh when he does the dance, my friends danced like that back in the day. CHOWEEEW
Never get tired of watching Mike work. He makes it look easy
LOCOCHON TIME
If it's Sunday it has to be Bello's Time better than going to church, Here we spend quality time with one of the great ones , Gracias Maestro por el video
It never gets old when you watch somebody do something and realize they know what the hell they’re doing I wonder how many of them 4 links he’s done ?
Back to Sundays feeling like Sundays! Thanks Mike!
So ironic this is exactly what my 36 ford needs replaced and installed...awesome! Time to take some notes on how to do things the right way!
Never get tired of watching Mike work. Great Job!
NEVER..!
Carapilla Salt Bae! 🤣 Mike's 4-link mount creation is exceptional!
🤙🏾🤙🏾✋🏽🤘🏾👍🏼😊😎.
Lot of work homes. If
You want to go down the road looking cool.
Old school vatos locos.😎😎🤙🏾⛓.
"The Bracket & Bushing Master", giving away all his secrets. _'Making Great Rides Greater'._ Cheers!
That is so important the ones that know theyr shit they give it on to the joung generation. I like to give my knowledge to the ones that want to now it.
Best of the best on the WESSSSSTSIIDDEEEE!
It means Strong AF!
Excellent engineering.👍🇨🇦
This is my favourite period for Ford vehicles, Such beautiful designs during this era
Love the electrical tape MAN-DAID. No waste on the plasma table, too cool!!
DEFINITELY a PROFECTIONIST who constantly turns out GREAT work !!
I heard Elvis for a minute, the tunes are hitting hard today up in Bello's kustoms! I'm caught in a trap...🕺🔥 4 link 👌
😉✌
Had to do the same quick finger repair last week to the same finger. Wrap in a baby wipe held on with black insulation tape after giving it a good spray with antiseptic and back to work no stitches required this time.
Nice work you definitely got some skills and a high work standard. You make it look easy but I know the hours we dont see involved. Cheers from New Zealand 😁🇬🇸👍
I love your work and I can tell your loving it so it’s not work . Keep on keeping on my friend.
Mike we are Thirsty for more Videos. This is the Best Channel Ive watched lately. Makes me want to build a car.Love it. Whatcha gotta do is.... LOL
Izzy wasnt gettin' the axle brackets, till he saw the bag mts. Old Hot Rod w/diamond plt floors (?) gettins the Bellos look and feel. Loco Chon baby,,,Izzy,,,
AS USUAL YOU THE MAN!!! CAN YOU SAY IT??? MANY BLESSINGS ALL!!!
Pura pasión...tú sabes homie...😁👍🖤🖤🇺🇲.. crazy... wonderful world beautiful Life...west Side!!
Quality work as always! Best of luck in everything you do bro!
I'll stop what I'm doing, every time I hear that bell notification, on bellos new video, 🤙🤙
Love your attention to detail!
Great work as usual.
You do great work. Which I could afford to get my truck worked on. I used to do it myself. I am 74. I'm on a fixed income. It's just a dream.
Maybe 1 day. I don't have a lot of time left. I wish I could drive one more time. I'll just keep dreaming.
Hell yeah. New episode! I've been anticipating this one. Time for a coffee and chill
Always nice to see a professional at work.
Calote is fuerte homie! Lokochons from Loveland Colorado ES gallito chulo
I love your happy dance brother you should be happy great work
Blood sweat and tears 😬 nice job and great tips Mike 👍
Verry nice work again Bellos
You are bad ass I love to watch your builds you are a true craftsman and you don't cut corners great job.
Very nice work perfekt..
Muy bueno el trabajo que hace este hombre en su taller espectacular!!!
Thanks for sharing always interesting!
Love the way you developed a process for doing this job. Thanks Mike.
Another great video
Nothing but perfection! Thanks Mike!
Mother FN perfection puro locochon 🎶🎶🕺🕺🕺🕺🕺💪💪✊✊ no doubt in my mind that the quality is on another level homie Bello's takes pride in the work oh yeah qvo catapillo
Get down like James brown!
Great job as usual beautiful job brother
Excelente trabajo......
Haaaaa, I can relate to the paper towel and the black tape on your finger!!!
Nice Work, like aways.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
Wie immer tolle Arbeit.
Laid-Out, Smooth-Operatin', Kookie-Kool, Mister Mike Bello...
Belle démo de ce qu·est un super carrossier !! Bravo
Calote is ur el mero mero!! Chingon todo locochon 😂 shouuuuuuuu
Ottimo lavoro ottimo video, maestro complimenti per le capacità lavorative , al prossimo un saluto Gek.
magic mike awsome stuff
Very Nice Work Mike
Is that diamond plate floor from the factory?! Use whatcha got I guess. I could watch this all day. I’ve learned a lot and used it on my current build.
Excellent work Boss! Great to see Carapilla on the bbq. Both brings things together…👍👍
Looking like another perfect job!
Super job!!!!
Amazing videos brother! I appreciate all the knowledge and professionalism that you’ve provided on every single video God bless!
Another great video capturing the fantastic work BELLO does for his clients.
You're a f^^king genius!
Good video
fantastic Mike love it keep em coming!
I have a machine shop and I’m always cutting my fingers/Hands ,so clean it with Cotten swab a peroxide when it’s dry I put super glue gel over the cut ,then hit it with the catalyst so it hardens up and it burns like hell for couple seconds .then I sand it down with 600 grit and your good to go a few days later super glue falls off .
Firm or strong. I cheated, and slowed it down to read it. Thanks homie. Jack. Also they say it will feel good, when it quits hurting.
Clean clean 👍🏽
Man that shit gives me chills on how nice that shit looks
Thanks again
It means bad ass carlos 😂
pura vida!
Nice work as usual Mike, U da man !
Beautiful job
Dude the shit you do is so inspiring I love it
I'm working on a 51 chevy hard top kustom from the 60s I'm gonna be lowering soon probably with blocks wish I had the shit to 4 link your shit is top notch man I want to lower mine like that just don't have the right shit love your work homie
Looking good homes!
My kid @alexis_the_welder is always amazed how you weld without gloves. 😂
Calote, ponchado, strong bad ass lokochon!!!!!
Awesome work!!!
Bellos strong 💪 😁👊
Awesome as usual
Good stuff.
Same as firme homie.
Homie do you have a website? I want to get me one of those Bellow's sticker...
BELLO'S! GIVING THAT BLOOD SWEAT & TEARS FOR THE JALE!
"Calote" means strong Locochon! Saludos de Los Angeles.
good job man 👍💪
Eso !! 👊🏾💯
Looks great & strong !
Top notch work, thanks
I dont get it. Am I wrong, or does this 4 Link construction not allow the rear axle to rotate towards the driveshaft -axle(x-axis) ? I mean the axle goes stiff upwards when you hit a stone with just one side, doesnt it?
Great work love watching.
What is the perfect length of the rear end from backing plate to backing plate for 1936 Ford? Thanks
You should give away the letters you cut out Mike, cool giveaway !
Great work definitely take my car there so he could work on it thanks compa
I like how you made a name for yourself......shop joke! Ha! 😂
#vatoloco #locochon #taraaa bendiciones compa mike eres un chingon 😎🙏🔥✌💪☝️
I love your builds. My dream is to have a true low rider
Olle loco. Que buena suspensión. Increíble que todo lo iso a mano