That was a great explanation! It's also cool to think that radio waves are just "light" but at a different energy level and wavelength than visible light.
Security cameras typically have an IR filter that physically moves in front of the sensor during daylight hours. You aren't going to make any progress by increasing the wattage of IR. To blind the camera during daylight hours you will need visible light.
Using higher wattage, higher output IR led's would NOT make any real difference as you are competing with regular daylight or extreme bright light of a regular normal day. The best effect you could achieve would likely resemble what your obtained result was with the IR cancelled during the night shot with the IR led's just faintly glowing around the plate frame. Further additional work is required to obtain a suitable method for blocking the photo during the day. As another person commented using visible light would SEEM the proper solution, but in recent days perhaps during the last couple of years, the agencies that are taking the photos can adjust for resolute clarity with various post editing means to obtain a clear plate reading and send you a bill. It is the classic cat and mouse scenario, or black hat versus white hat hacker. Good luck with your mission.
Wouldn't the IR detection just turn off during the day? The camera I have at home automatically switches to IRNV only when the visible light isn't enough to see with; I don't see why speed cameras would be any different.
What leds are u using for the upgrade? Im making a 3d print design for both the glasses and number plate, would love to know what leds to measure out for the number plate
I’m not a good solder but I would try to make a necklace along with glasses and spots for my shoes to cover my body from head to two in light making me look like a star walking into a building. I’m so glad you uploaded it to youtubeeeeeee. Is their a way to tell which cameras are in RFID mode compared to daytime mode. Or how to know what cameras do?
Connecting LEDs directly to a power source will destroy the LED. LEDs cannot limit their own current consumption so another device must be used to do so, usually a resistor or LED driver.
It's too bad you didn't understand how license plates work. All plates in the US have retro-reflective paint used for the background. You should look it up.
Instead of spending time and money making one of these (which is probably illegal anyway) just remember this, if you get a camera ticket, go to court and demand to have a trial. The state has to prove you guilty. Since there was no police officer who witnessed the “crime” who can the state subpoena to testify against you?? 🤷♂️
That was a great explanation! It's also cool to think that radio waves are just "light" but at a different energy level and wavelength than visible light.
yeah man! another interesting fact is that all of those forms of light travel at the same speed.
@@MakeItHackin Did you make the upgrade video with the military-grade LEDs?
Security cameras typically have an IR filter that physically moves in front of the sensor during daylight hours. You aren't going to make any progress by increasing the wattage of IR. To blind the camera during daylight hours you will need visible light.
Definitely interested in this!! Keep up the good work!!
Awesome comment, thank you!
great job!! im looking foward to see the next episode
Only one problem...if u use this to block toll road cameras it will automatically alert police when it can't read your tag!
Yep that’s what I’m thinking but I like the idea
Using higher wattage, higher output IR led's would NOT make any real difference as you are competing with regular daylight or extreme bright light of a regular normal day. The best effect you could achieve would likely resemble what your obtained result was with the IR cancelled during the night shot with the IR led's just faintly glowing around the plate frame. Further additional work is required to obtain a suitable method for blocking the photo during the day.
As another person commented using visible light would SEEM the proper solution, but in recent days perhaps during the last couple of years, the agencies that are taking the photos can adjust for resolute clarity with various post editing means to obtain a clear plate reading and send you a bill. It is the classic cat and mouse scenario, or black hat versus white hat hacker. Good luck with your mission.
Wouldn't the IR detection just turn off during the day? The camera I have at home automatically switches to IRNV only when the visible light isn't enough to see with; I don't see why speed cameras would be any different.
What leds are u using for the upgrade? Im making a 3d print design for both the glasses and number plate, would love to know what leds to measure out for the number plate
Any luck on the number plate design if so, we’ll buy in bulk$$??
I’m not a good solder but I would try to make a necklace along with glasses and spots for my shoes to cover my body from head to two in light making me look like a star walking into a building. I’m so glad you uploaded it to youtubeeeeeee. Is their a way to tell which cameras are in RFID mode compared to daytime mode. Or how to know what cameras do?
Nope, RFID is different that's something like a key card to get in a building, completely different
in fact all camera are ir camera but they put a filter for ir. but you can remove it
did u make any update on this topic? Did u buy those exspensive one?
cant find that fernell tape you bought what is it called on ebay?
How many leds needed for this to work. In my case i can only put 2 leds which will be placed on the screws that holds the plate. Will this work?
What about aiming the Infrared LEDs at the license plate, but spraying the license plate with that highly reflective spray?
What reflective spray is best??
What about those meds they use on your clothes to hide face when camera flashes
Will this works when speed Camera Flashes at Night
where do I buy this???!!!
You should use luxeon Stars
What do the resistors do? Can this work without the resistors?
Connecting LEDs directly to a power source will destroy the LED. LEDs cannot limit their own current consumption so another device must be used to do so, usually a resistor or LED driver.
@@Marios03wrx Thank you for a straight forward answer.
And gamma radiation makes a hulk
Exist and third way... Flashing in same moment fhen flashlight speed camera...
It's too bad you didn't understand how license plates work. All plates in the US have retro-reflective paint used for the background. You should look it up.
Instead of spending time and money making one of these (which is probably illegal anyway) just remember this, if you get a camera ticket, go to court and demand to have a trial. The state has to prove you guilty. Since there was no police officer who witnessed the “crime” who can the state subpoena to testify against you?? 🤷♂️
And this work in USA? I dont belive this wd work in EU...
maybe, just maybe, some kind of "vibrator" behind the plate, so it shakes... idk that's my best idea
or an EMP lol
Waw. Great
Hey do you know how to remove the little star sign from like the password when it doesn’t let you see it
In NY they use flash strobes at night, NOT infrared! This is useless
Flash strobes ?? Hmmm will a reflective film work??
This man living in 2030
Gee, nothing like being a jerk that evades road tolls, runs red lights , does a hit and run.
Karen has entered the chat!