How your solder always flows perfectly is amazing. What skill and attention to detail! Beautiful design and perfect execution. I could never make this ring - but I am going to try! It will probably take me 20 years.
Wow! What an amazing job, so lovely thank you for sharing. And cutting that inside ring out after soldering at an angle, looks nearly impossible... you made it look so easy!
@@scaffoal hace 15 años deje de hacer trabajos en plata porque vine a vivir a Suiza, pero he visto tus videos y me dierón muchas ganas de empezar de nuevo. Saludos de un mexicano perdido en Suiza 🤣
I love the design , STUNNING! maestro you are the best ! let's see the trolls work , bet its not as awesome as yours, keep up the amazing work, and don't listen to the jealous trolls
Awesome work. Thanks from Australia! I wonder how much the raw material cost in total approximately? I want to start making silver rings and love your videos.
thanks, If you want to start with the processing of silver, the raw material costs relatively little, often the greatest investment is for the necessary machinery.
L'anello è stupendo,ma perché usare la colla per fissare i due onici?A lungo andare la colla si ossida e le pietre finiscono con lo staccarsi.Non è meglio incastonarle?
per esperienza le colle epossidiche hanno una altissima tenuta anche dopo molti anni, inoltre per potere incastonare i cabochon è necessario un bordo più alto che risulterebbe esteticamente diverso, per ultimo in caso che si debba intervenire per una riparazione è possibile smontare le pietre senza danneggiare la struttura. Chiaramente ogni soluzione ha i suoi pro e contro, sono le esperienze lavorative che nel tempo ci fanno fare le scelte che riteniamo più appropriate, non sempre condivise da artigiani, che nella loro storia lavorativa hanno avuto esperienze e trovato soluzioni diverse.
I have a question my boss tell me. If I put too much solder on the silver is going change the silver color is this true. Because he teaching me to put a little bit of solder on the joint and i afraid it snapped
It is wrong to use more welding than necessary, the tightness of a weld is determined by many factors, you have to do many tests, then over time you will find the best solution. various factors affect: the type of welding you use, how much it is heated beyond its melting point, the preparation of the object to be welded. If you have a teacher who teaches you, listen to him, his experience can show you the way, then in time you will be able to choose the technique you prefer.
@@scaffoal thank you scaffoal,here in philippines we use a kind wax for stone setting..the problem is the strong odor when the wax was melted...i always watch your channel...god bless
Everyone’s a critic... the guy obviously knows what he’s doing..he’s been a jeweler for a really long time. Don’t you think if he really thought that wouldn’t work he wouldn’t have done it..it’s a beautiful ring and I’m 110% the glued settings will be fine..some epoxy have a strength setting of 2 tons.. that’s a lot hold strength. Love your work!
thank you, as you rightly said, this type of glue is extremely resistant, moreover by using glue, we have other advantages, the edge that holds it can be low and aesthetically more pleasant, the stone can be dismantled for a possible repair.
Thank you for opening my manual skills, as far as design is concerned, I can only accept criticism, because I understand that not all of us have the same tastes. I like this design.
Yes it can, but that really doesn't hold the same value as a truly handmade piece. Plus, for a one off, lost wax casting is not really much quicker or easier. There can be a lot of clean-up of a casting and there can be a high chance of failure, depending on your equipment and level of experience.
![[ Making Ring ] 佛 夢 Buddha Dream / 수제 은반지 만들기](http://i.ytimg.com/vi/MndPbQBNq4A/mqdefault.jpg)
Excelente trabajo Maestro!!! 👏
Lo sigo, ver sus videos son una inspiración.. Gracias por compartir sus técnicas con nosotros.
How your solder always flows perfectly is amazing. What skill and attention to detail! Beautiful design and perfect execution. I could never make this ring - but I am going to try! It will probably take me 20 years.
Absolutely a beautiful Art Deco ring. Expertly crafted by a true artist.
thank you
Wow! What an amazing job, so lovely thank you for sharing. And cutting that inside ring out after soldering at an angle, looks nearly impossible... you made it look so easy!
This is an incredible piece of art. Your videos have followed me for years and inspired me to always try harder and harder. Respect !
Enjoyed your video and I gave it a Thumbs Up
Saludos desde Perú
Hello 👋 great hand job👍👍👍excellent 👍great precision 👍
I like it very much 🌼🌺🌼🌺🌼🌺🌼🌺🌼🌺🌼🌺🌼🌺 I wish you a wonderful day 🌞
Excellent craftsmanship and a beautiful piece!
Você é incrível !
Fantástico seu trabalho Parabéns
obrigado
Reminds me of H.G. Wells time machine date control. Fantastic work brother!
thanks
Brilliant! You make it look easy.
Super trabajo!! Gracias por compartir. Saludos 💎💎💎
gracias
@@scaffoal hace 15 años deje de hacer trabajos en plata porque vine a vivir a Suiza, pero he visto tus videos y me dierón muchas ganas de empezar de nuevo. Saludos de un mexicano perdido en Suiza 🤣
Impressionante,como vc faz parecer simples!!! simplesmente sensacional..🙌👏👏👏👍🇧🇷
gracias
@@scaffoal do you sell it?
now that is a piece of stunning work
thank you
Beautiful! Very useful video, thanks for sharing.
You are a Master Goldsmith 💎👌❤️
thank you
It's different. Nice work!
thank you
Love this ring!! Everything you do is amazing!
thank you very much
@@scaffoal you’re very welcome!
Maravilhoso como sempre.
Um abraço de portugal mestre.
Me gusta el riesgo que tomas en los diseños y eso lo hace muy técnico y original,bravo!!!
gracias
Hola buen día es usted un excelente joyero saludos desde xalapa veracruz Mexico
Dooooood. Thank you for the info on the vector drawing software. Ima make something like this now.
You are welcome!
I love the design , STUNNING! maestro you are the best ! let's see the trolls work , bet its not as awesome as yours, keep up the amazing work, and don't listen to the jealous trolls
thanks a lot
Awesome work. Thanks from Australia! I wonder how much the raw material cost in total approximately? I want to start making silver rings and love your videos.
thanks, If you want to start with the processing of silver, the raw material costs relatively little, often the greatest investment is for the necessary machinery.
I think that the real value comes from the skill and experience of the maker here. Buying the materials is the easy bit!
What a great piece of hard work 💪🙌
Extreme creativity
There’s only scaffy. Bravo as usual 😊
thanks
I love watching your videos.. i find them very relaxing, and you make really nice jewelry.
thanks a lot
Una belleza de verdad. Un gran saludo y gracias por compartir tu talento
gracias
Y cuanto puede costar una obra de arte así?? Excelente trabajo🔥🔥🔥👏🏾
Awesome handwork! You have my like. Looking forward to watching more videos.
lindo !!! divino!!! parabéns!!
Excelente trabalho. Agora eu sei como se faz.
obrigado
Where do u source the diamonds from
What are the black pieces on the sides made of?
非常喜欢大师的制作过程,也充分学习加强自己😀😀😀
谢谢, thank you
The master exceeds again!
thanks
L'anello è stupendo,ma perché usare la colla per fissare i due onici?A lungo andare la colla si ossida e le pietre finiscono con lo staccarsi.Non è meglio incastonarle?
per esperienza le colle epossidiche hanno una altissima tenuta anche dopo molti anni, inoltre per potere incastonare i cabochon è necessario un bordo più alto che risulterebbe esteticamente diverso, per ultimo in caso che si debba intervenire per una riparazione è possibile smontare le pietre senza danneggiare la struttura. Chiaramente ogni soluzione ha i suoi pro e contro, sono le esperienze lavorative che nel tempo ci fanno fare le scelte che riteniamo più appropriate, non sempre condivise da artigiani, che nella loro storia lavorativa hanno avuto esperienze e trovato soluzioni diverse.
Great work👍
thanks
great!!!!! like every pices you do.....
Súper amazing. For a Queen.
Buen trabajo. Tuviste trabajo en la cuarentena?
No, en Italia las actividades laborales han estado cerradas durante dos meses.
I really like the clock spring. Hard to come by.
Amazing ring 😃
thank you
I have a question my boss tell me. If I put too much solder on the silver is going change the silver color is this true. Because he teaching me to put a little bit of solder on the joint and i afraid it snapped
It is wrong to use more welding than necessary, the tightness of a weld is determined by many factors, you have to do many tests, then over time you will find the best solution. various factors affect: the type of welding you use, how much it is heated beyond its melting point, the preparation of the object to be welded. If you have a teacher who teaches you, listen to him, his experience can show you the way, then in time you will be able to choose the technique you prefer.
Where can I buy it?
true craftsmanship and design
Very nice. 👌🥂🍒🤞👍
Très jolie cette bague 👍🏻💓
merci
Espectacular...
I'm interested in goldsmith can you suggest me some good books about jewelry in history or good books about collection of jewelry?
in Italian there is "orificeria moderna"
@@scaffoal thank you very much!
Do you sell your ring by any chance ??
Bella Bella Bella!!!!!
How do you minimize the loss of gold due to the filing,drilling,ect?
All waste is captured including filings and small off cuts, sweeps etc. Then sent to a refiner who will pay you for the recovered metal.
Really the loss of gold is minimal, everything is recovered.
Bellissima Collega!!
grazie
Bravo Maestro.
grazie
Wow,another masterpiece,by the way..,what kind of clay that holds the ring...god bless
Not clay it is a thermoplastic
I use a mastics for setting.
@@scaffoal thank you scaffoal,here in philippines we use a kind wax for stone setting..the problem is the strong odor when the wax was melted...i always watch your channel...god bless
Ultimet work my master is best goldsmith in the world ।
Thank you, but I'm just one of many.
grreat job like always
thank you
Show!!!
thanks
fantastico lindo obrigado
scaffoal
obrigado
👍👏🍻
Whoever disliked this must be a troll. No way they watched the video
thanks
Could you make a unicorn ring?
it's possible
❤️💐❤️👍
thanks
That is so tacky .... the obnoxious will love it
It's bling bling but I would not buy that ring style.
Где сам процесс закрепки? особенно глухая
?
Почему самые интересные моменты не показываете?
Harika türkiyeden sealamlar
Yo quede desempleado😢
I just watched the great Scaffoal glue in a stone. I'm not sure how I'm feeling right now 😔
Many lower value stones are glued in. It's not necessarily a bad thing. But I do understand... :)
Many stones are glued in. Onyx or opal can be glued for example. Pearls are glued too btw.
Si se bicela queda muy alto el bicel
Por eso es recomendable el pegamento
Siempre se a usado
Everyone’s a critic... the guy obviously knows what he’s doing..he’s been a jeweler for a really long time. Don’t you think if he really thought that wouldn’t work he wouldn’t have done it..it’s a beautiful ring and I’m 110% the glued settings will be fine..some epoxy have a strength setting of 2 tons.. that’s a lot hold strength. Love your work!
thank you, as you rightly said, this type of glue is extremely resistant, moreover by using glue, we have other advantages, the edge that holds it can be low and aesthetically more pleasant, the stone can be dismantled for a possible repair.
i wished you used opal on the sides, would of been stunning
You are an artist, at this time it's good handcraft as usual but poor design.
You mek this
Thank you for opening my manual skills, as far as design is concerned, I can only accept criticism, because I understand that not all of us have the same tastes. I like this design.
@@scaffoal I like the design. It is unique, not like every other ring that exists. Very creative, great looking piece of art.
sorry, but the same effect could be achieved by doing it in wax, then casting
Yes it can, but that really doesn't hold the same value as a truly handmade piece. Plus, for a one off, lost wax casting is not really much quicker or easier. There can be a lot of clean-up of a casting and there can be a high chance of failure, depending on your equipment and level of experience.