In the process of installing them now, my mechanic isn’t sure what the smallest wire does or where it goes. And the DRL light in the passenger doesn’t work in DRL mode only turns on for low beams.
Focused Garage I am glad no major damage was done though, You guys really did a great job with those cars . Super glad Onder still has his too. I ordered NGK Iridium IX colder plugs with the FMIC 2 weeks ago. Expecting them in like another 6 weeks. Benefits of living in Africa lol haha :)
Is there an easier way to remove the headlight and grill? I’ve seen videos of people removing the entire bumper. Is it necessary? Do you have instructions or a video on this? I am replacing my grill and headlights to the ones you have.
I've done this a few times now and you can get away removing just the grill to he able to replace the headlights, the bumper doesn't have to come off. That being said, you're much more likely to scratch stuff if you do leave the bumper on. So if you want to play it safe, just take the bumper off. Only takes a few more minutes.
Thank you for this video. I just installed these same style Headlights (different brand but the same thing) and I was wondering, what did you do with the extra red/white/black cable that is on the back of the assembly. They have a connector at the end of them and I was thinking that these were for a Halo style of application but, these aren't Halo headlights. Any help is appreciated. Thank you!
I just purchased a 2017 jetta se with the halogen reflector style headlights, has 1 bulb for high and 1 bulb for low beams. These are really nice, would the work for mine? I also have factory DRLs on mine.
I'm thinking about adding the LED bulbs to these headlights as well. Was the install of the bulbs a simple plug and play? And will I need to make any modifications to the dust cover?
Does the DRL LED tube have a separate bulb and is it replaceable or is it sealed in the housing? If it's replaceable, a brighter bulb will help with a bright bold look. Thanks!
Hello. Sorry to bother you. I'm buying headlights for my wife's car. How does the visibility compare to the stock assembly ? I want my wife to be able to see , but her original assembly is broken.
I had a question about these.. will the DRL left strip run even if your car does not have DRLs? Because my car does not have DRL and it's a mk6 but the way you explain it seems like the led will constantly be on...?
I'm about to remove mine that I had installed back in 2016. Too many issues, and they haven't aged well. I don't recommend this model of aftermarket headlight. I don't understand what's the point of the load resistors used in this design, if it doesn't simulate the OEM voltage to avoid constantly throwing a code. They use a cheap adhesive on the load resistors that liquefies and breaks down the adhesion. The load resistors just get way too hot. A laser temperature gun reads around 200 degrees Fahrenheit. So I had used a self tapping screw to mount to a metal surface. Still, one of my load resistors got wet. Eventually, both the headlights stopped working. Next time, the manufacturer should simply take an original OEM assembly, and just replace the incandescent DRL lighting fixture with the LED DRL of the same exact electrical load. And NOT change the regular headlight from the OEM H7 to H1, for no reason. The OEM H7 is supposed to be 55W.
Sorry to hear you've had so many issues. I've had mine installed for over a year now and all is good. I have the resistors on the headlight themselves with no degradation at all. Lenses are still clear and everything functions as it should. Maybe the earlier builds have had quality issues. Also no issues with codes being thrown either.
hi! i have a 2016 GLI SE and mine came with the basic halogen headlight assembly. I wish i would of bought the SEL so i got the bi xenon headlight assembly. I think these match the look of the GLI way more then the factory headlamps. I have two questions. how well are these headlights holding up? also, i know you said in the video the DRLs arent that bright but how would you compare them to replacing the halogen bulbs with LED bulbs? because thats what i did with my OEM headlights I have now. I just replaced the halogen DRL light bulbs with LEDs.
The DRL on this is already an LED and it is a sealed non replaceable LED. No way to upgrade that without taking apart the headlight. The lights themselves are holding up great! No issues with the lenses or anything like that.
@@FocusedGarage I'm sorry. I didnt ask that question that clear. On my current headlamp assembly I replaced the halogen 1156 DRL bulbs with 1156 led bulbs. I replaced them with the philips branded 1156 LED bulbs. How would you compare the brightness between regular 1156 LED bulbs and these DRLs on your headlights? are they comparable? and thats good to hear! I'm going back and forth if i should replace my OEM headlights.
Didn't your Gli come with bi~xenón headlights? If so, I wouldn't recomend switching them because of the assisted programming those headlight have.... Though I've heard that gli's in the states don't all come with bi-xenon headlights. If that's the case their is a new set of headlights that came out with a red xenon day light bulb. They look sick you should look for those...
Hi, when you installed your LED bulbs, did you have a problem with the male connector from the black wire being too small to connect to the female headlight connector? I tried installing some LED bulbs and only the red wire connects properly.
Is there a specific type of LED headlight bulb that does not shoot out error codes? Based on my understanding, I thought LED bulbs would throw error codes unless installed with a load resistor.
Are these hard to install? I might buy these but have no experience with cars or anything of the sort. Anything that a beginner would find challenging?
These are simple enough that if you follow any tutorial video you should be able to figure it out. The only intimidating part I'd say is removing the front bumper.
Focused Garage Fair, i’m just looking for somewhere that ships these to canada. It says on the Spec D website that it’s not compatible with Factory HID headlight models? You said it was plug and play, what’s that about? I have a 2015 Trendline+
Hello! Regarding these lights, I have them on my 2011 Jetta and was wondering if I could get any help on how to change my projector lights to led? I’m thinking of getting hikari h1s on Amazon. Will that work? And how in the world do I install the bulbs?! Help!!
How did you do the wiring for the LED strips, are they wired to the DRLS or the parking lights? I'm thinking of putting these in my 2012 and noticed that with the stock lights the DRLS turn off when the low beams come on.
I noticed that After installing these, the LED DRL's do not work. I then realized the stock connector doesn't the same amount of pins on the headlight connection. Did you have this issue too?
So I just got these lights and was under the impression they’re plug and play. However, mine have a red, white and black wire coming out of them and I haven’t found any info on where those wires plug in. Do you know anything about this?
On which side of the harness? The headlight side or vehicle side? The headlight had an extra harness for leveling motors which I don't have so it was simply left unplugged. No issues.
Focused Garage i’m scared to purchase ones that are too big for them to fit within the dust cap space, if you could send me a link to the ones you bought or similar? i’d appreciate it
+LSswappedMX5 the only time I get a bulb out warnings is if I flash my high beams. From normal driving with blinkers and lowbeams I never have any issues. Just when I use the high beams. The lights work, it just throws a "bulb out" light sometimes when using the highs. Other than that they work perfectly.
Focused Garage I have them and tomorrow I will get my LED from Cougar Motor but I made the mistake not to order then hi low beams. Anyways, yours are single or dual beams? Just curious. Thanks. Have my headlights for 3 years and the are fine. My only dead lights sings was when I tried LED for the turn lights. Went back to the old ones and it turned back to normal. Don’t need them for the turn signals anyway.
Focused Garage that’s definitely a plus, I’ve been looking at the UU, and the oem looking ones but both need to be coded to run DRL and to have the bulb error codes which is a pain
+Bobby Shuart I really liked the UU ones and at times still wish I got them but I just couldn't justify spending double what I paid for these to get them. Haha.
Focused Garage that sucks because I have already seen a few of them on the road with the LED out on one side. I love the look but it's an expensive "bulb change". On the fence at the moment. If only there was a "how to" video on how to change the LED strip
If you buy it from a good supplier who uses quality LEDs, You won't need to replace them. They last long time. Most burned out LEDs you see are cheap LEDs that got hot and burned out. We could do a DIY video about taking the headlight a part. That wouldn't be a big deal. It will be on a different headlight since Mike's still works. However, it will be the same concept.
@@FocusedGarage I've thought about that. It's just more common to see, only real negative with these in my opinion is you csnt see them well when it's really sunny
Can you adjust the main lens at all. I actually bought a Jetta with these exact headlights. But they aren’t pointing at the right height. One is low and the other is a bit high.
@@FocusedGarage hey man thanks for the reply! just received mine for my 2015 facelift today im stoked! but question did yours have an extra wire on the bottom? i think its black red and white? what do you do with that?
The only error I got was when using the highbeam. Other than that, they work perfectly fine with no issue. You can turn off the high beam error with vagcom or OBDEleven.
I replaced the switch with a Euro Switch but this isn't necessary. I just did it because I like the ability of having a parking light and fog light switch, not a simple on/off only like the factory.
![[Live] : ONE FIGHT NIGHT 26 วันนี้!! “คริสเตียน vs อาลิเบก”](http://i.ytimg.com/vi/UlIiZ3t8nHQ/mqdefault.jpg)
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
wow these look better than i thought!! i’m thinking about getting these in mine
Definitely pleased with them!
@@FocusedGarage do you know if they work for the 2018? I know it's still MK6 but some websites say it won't fit, some say it will
Yes it will work on your car.
In the process of installing them now, my mechanic isn’t sure what the smallest wire does or where it goes. And the DRL light in the passenger doesn’t work in DRL mode only turns on for low beams.
Lights look great Mike :)! I do miss the FoST...your car was the inspiration of what I wanted to do with mine :)!
+FreSTrada420 definitely loved the FoST! Just didn't trust it after it ate the one spark plug lol. I'm glad Onder still has his!
Focused Garage I am glad no major damage was done though, You guys really did a great job with those cars . Super glad Onder still has his too. I ordered NGK Iridium IX colder plugs with the FMIC 2 weeks ago. Expecting them in like another 6 weeks. Benefits of living in Africa lol haha :)
Looks great! What type of bulb do these use? Will the factory h7 bulbs work?
No. These use what I think are H1 or H11 bulbs. Just pay attention to the listing for whichever housings you are buying. They call it out, usually.
Is there an easier way to remove the headlight and grill? I’ve seen videos of people removing the entire bumper. Is it necessary? Do you have instructions or a video on this? I am replacing my grill and headlights to the ones you have.
I've done this a few times now and you can get away removing just the grill to he able to replace the headlights, the bumper doesn't have to come off. That being said, you're much more likely to scratch stuff if you do leave the bumper on. So if you want to play it safe, just take the bumper off. Only takes a few more minutes.
Thank you for this video. I just installed these same style Headlights (different brand but the same thing) and I was wondering, what did you do with the extra red/white/black cable that is on the back of the assembly. They have a connector at the end of them and I was thinking that these were for a Halo style of application but, these aren't Halo headlights. Any help is appreciated. Thank you!
Hey there, I want to say that is to retrofit dynamic/turning lights but can't entirely remember.
what kind of LED style bub did you swap your hallogens for? i ened up running into issues with the leds i put in my car last year,
Just generic LED headlight replacement bulbs from Amazon. They worked for well over a year and never gave me issues.
When you switched to led lights was it h7s as well? Also did u have to buy special retainer clips
The bulbs I bought were a direct swap.
I just purchased a 2017 jetta se with the halogen reflector style headlights, has 1 bulb for high and 1 bulb for low beams. These are really nice, would the work for mine? I also have factory DRLs on mine.
Yes, this would work for your vehicle.
I'm thinking about adding the LED bulbs to these headlights as well. Was the install of the bulbs a simple plug and play? And will I need to make any modifications to the dust cover?
It took a bit of figuring out at first, but I was able to get everything to fully sit and still use the dust covers. All works great!
What LED bulbs did you purchase?
Just some generic ones off Amazon.
Does the DRL LED tube have a separate bulb and is it replaceable or is it sealed in the housing? If it's replaceable, a brighter bulb will help with a bright bold look. Thanks!
It's fully sealed and enclosed from what I could tell. Otherwise I'd love to just put a brighter bulb in there.
Yeah, kinda figured. Thanks for the reply!
Not a problem!
Hello. Sorry to bother you. I'm buying headlights for my wife's car. How does the visibility compare to the stock assembly ? I want my wife to be able to see , but her original assembly is broken.
I ran these with LED bulbs and there was more light output than the factory halogens.
@@FocusedGarage thanks for the quick reply on such an old video. Over the years has the plastic faded or yellowed ?
Car has been sold now, but the lights held up over one hear without any issues or problems.
I had a question about these.. will the DRL left strip run even if your car does not have DRLs? Because my car does not have DRL and it's a mk6 but the way you explain it seems like the led will constantly be on...?
Your car doesn't have any sort of DRL or even little "city lights"? If it doesn't, the DRL feature of these lights may not work.
How did you install the LED I’m having a hard time
It all simply plugged into the factory harness.
What about lowbeam and high beam and turn signal on the spec d tuning lights and when you went to led did it throw a code on the dash?
The only thing that throws a code is when using the high beams with these lights.
I'm about to remove mine that I had installed back in 2016. Too many issues, and they haven't aged well. I don't recommend this model of aftermarket headlight. I don't understand what's the point of the load resistors used in this design, if it doesn't simulate the OEM voltage to avoid constantly throwing a code.
They use a cheap adhesive on the load resistors that liquefies and breaks down the adhesion. The load resistors just get way too hot. A laser temperature gun reads around 200 degrees Fahrenheit. So I had used a self tapping screw to mount to a metal surface. Still, one of my load resistors got wet. Eventually, both the headlights stopped working.
Next time, the manufacturer should simply take an original OEM assembly, and just replace the incandescent DRL lighting fixture with the LED DRL of the same exact electrical load. And NOT change the regular headlight from the OEM H7 to H1, for no reason. The OEM H7 is supposed to be 55W.
Sorry to hear you've had so many issues. I've had mine installed for over a year now and all is good. I have the resistors on the headlight themselves with no degradation at all. Lenses are still clear and everything functions as it should. Maybe the earlier builds have had quality issues. Also no issues with codes being thrown either.
hi! i have a 2016 GLI SE and mine came with the basic halogen headlight assembly. I wish i would of bought the SEL so i got the bi xenon headlight assembly. I think these match the look of the GLI way more then the factory headlamps. I have two questions. how well are these headlights holding up? also, i know you said in the video the DRLs arent that bright but how would you compare them to replacing the halogen bulbs with LED bulbs? because thats what i did with my OEM headlights I have now. I just replaced the halogen DRL light bulbs with LEDs.
The DRL on this is already an LED and it is a sealed non replaceable LED. No way to upgrade that without taking apart the headlight. The lights themselves are holding up great! No issues with the lenses or anything like that.
@@FocusedGarage I'm sorry. I didnt ask that question that clear. On my current headlamp assembly I replaced the halogen 1156 DRL bulbs with 1156 led bulbs. I replaced them with the philips branded 1156 LED bulbs. How would you compare the brightness between regular 1156 LED bulbs and these DRLs on your headlights? are they comparable? and thats good to hear! I'm going back and forth if i should replace my OEM headlights.
Ahhh I'd say these are more than likely more dim than the bulbs you're referencing.
@@FocusedGarage Dang, thats kinda of a bummer
Certain lighting they look really awesome. In most daylight they're almost invisible.
Will these fit on the facelift models? I have a 2017 GLI and I would really like to swap to something like the Spec-Ds.
Yes this will fit on all MK6 Jettas, including facelift model. The car in this video actually is a facelift model.
Focused Garage Not sure why I thought it wasn’t a facelift MK6, but thanks! Might try to get some of these.
If you get them, let us know!
Didn't your Gli come with bi~xenón headlights? If so, I wouldn't recomend switching them because of the assisted programming those headlight have.... Though I've heard that gli's in the states don't all come with bi-xenon headlights. If that's the case their is a new set of headlights that came out with a red xenon day light bulb. They look sick you should look for those...
I wouldn't recommend swapping these on a car that came with factory HIDs.
Hi, when you installed your LED bulbs, did you have a problem with the male connector from the black wire being too small to connect to the female headlight connector? I tried installing some LED bulbs and only the red wire connects properly.
My LED bulbs fit fine with no issues. There was no need to modify any of the connections.
Focused Garage Did you have a specific link to the ones you ordered?
I do not anymore.
hi mate, i know that its been a long time, but im wondering if you have a picture or a video of the light output pattern!
Sorry about that, car has since been sold. However it is a sharp cutoff, and there was a distinct line to see.
Is there a specific type of LED headlight bulb that does not shoot out error codes? Based on my understanding, I thought LED bulbs would throw error codes unless installed with a load resistor.
The generic H1 LED that I bought worked fine with no issues.
Are these hard to install? I might buy these but have no experience with cars or anything of the sort. Anything that a beginner would find challenging?
These are simple enough that if you follow any tutorial video you should be able to figure it out. The only intimidating part I'd say is removing the front bumper.
Focused Garage Fair, i’m just looking for somewhere that ships these to canada. It says on the Spec D website that it’s not compatible with Factory HID headlight models? You said it was plug and play, what’s that about? I have a 2015 Trendline+
Hello! Regarding these lights, I have them on my 2011 Jetta and was wondering if I could get any help on how to change my projector lights to led? I’m thinking of getting hikari h1s on Amazon. Will that work? And how in the world do I install the bulbs?! Help!!
As long as it's the same style as the halogen bulb that's already in there (H1 in this case), any LED bulb that is H1 should work.
Can u control the level of the high as the oem ( raise it and lower the light)?
Yes it is manually adjustable.
How did you do the wiring for the LED strips, are they wired to the DRLS or the parking lights? I'm thinking of putting these in my 2012 and noticed that with the stock lights the DRLS turn off when the low beams come on.
No special wiring needed. They were plug and play and always remain on.
@@FocusedGarage The answer to these questions lies within the switch itself if I'm not mistaken
I noticed that After installing these, the LED DRL's do not work. I then realized the stock connector doesn't the same amount of pins on the headlight connection. Did you have this issue too?
Nope. Mine work with no issue. DRLs are always on as long as the car is on and ebrake is down. What year/trim is your car?
I found out that the seller forgot to give me an adapter for North American Jetta's. Hoping that the issue. Its a 2015 Trendline.
Hopefully that's all you need. My car is US spec and everything plugged right in.
Also are these plug and play?
Yes they are.
Which LED replacement bulbs did you use for the headlights?
Just some generic ones I found on Amazon.
Can you provide the link for the LED bulb you used from Amazon? Love the video, by the way! :)
The product listing is no longer available. However any H1 LED should do the trick.
the luminosity is good? i have this headlights but, at nighs its so bad
Yes, the LED bulbs help a ton.
So I just got these lights and was under the impression they’re plug and play. However, mine have a red, white and black wire coming out of them and I haven’t found any info on where those wires plug in. Do you know anything about this?
The additional wire is for headlight leveling motors. It can be left unplugged.
Focused Garage awesome thanks for the quick response
No problem.
I own a 2014 passat, Im curious to know if these headlights will fit.
The Passat has a different shape headlight so these will not fit.
will these fit on a 2012 Jetta 2.0L? do I need extra tool/ kit to make sure they fit? thanks
They will fit on a 2012.
What did you do with the extra plug.? (Black, red & white wires)
On which side of the harness? The headlight side or vehicle side? The headlight had an extra harness for leveling motors which I don't have so it was simply left unplugged. No issues.
Trying to figure this out as well.. my car is throwing a code on the dash.
Do you know if the projector is a 2.5 or 3 inch lens?
I'd have to measure but from a guess I'd say 2.5"
Did you get the error light in your dashboard?
Only when flashing the high beam.
Hi, do you happen to know where i could buy LED H1 Bulbs for the headlights? i looked up some but no luck.
eBay, Amazon, or Aux Beam.
Focused Garage i’m scared to purchase ones that are too big for them to fit within the dust cap space, if you could send me a link to the ones you bought or similar? i’d appreciate it
Will these fit a 2017 GLI with the Led DRL and Halogen Head lights
If your car came with OEM halogens, these should work.
Would these fit any mk6? Regardless of trim?
Any MK6 regardless of trim as long as it did not come with the factory HIDs
Did your car throw any codes after installing them? I wanted to get them for my GLI but I’ve heard that ppl sometimes get bulb out error codes
+LSswappedMX5 the only time I get a bulb out warnings is if I flash my high beams. From normal driving with blinkers and lowbeams I never have any issues. Just when I use the high beams. The lights work, it just throws a "bulb out" light sometimes when using the highs. Other than that they work perfectly.
Focused Garage thanks for replying looks like I’m getting these. Good video btw subbed
+LSswappedMX5 thanks for the sub! Let us know if there's anything else you'd like to see.
Focused Garage I have them and tomorrow I will get my LED from Cougar Motor but I made the mistake not to order then hi low beams. Anyways, yours are single or dual beams? Just curious. Thanks. Have my headlights for 3 years and the are fine. My only dead lights sings was when I tried LED for the turn lights. Went back to the old ones and it turned back to normal. Don’t need them for the turn signals anyway.
My hi/low is all shared through the same bulb.
Would these fit on a 2015 TDI Jetta?
Yes they will. That is what my car is.
Did u loose the high beams for these??
Nope. High and low share the same bulb now. Still have functioning high beams.
What size of bulb does this headlight take and what brand led did you get for them
+eric bordo this uses an H1 bulb for the high/low. I just bought some generic LED bulbs off Amazon. They fit without trimming the dust cap.
Focused Garage looks good! I noticed some of the H1 leds have a metal heatsinc and some have a ribbon style heatsinc. Which kind did you purchase?
The heatsink on mine is a metal base at the bottom of the bulb. Almost like fan blades.
Thanks! Just picked some up on Amazon today.
Hope you like em!
I installed these headlights and have a LED headlight bulb in them. The beam seems to be off, how can I fix this?
Try adjusting the beam. There should be two screws for this.
Did these need coding to get the DRL to run normal?
+Bobby Shuart the DRL was plug and play. No need to code or wire anything up. No bulb out warning either.
Focused Garage that’s definitely a plus, I’ve been looking at the UU, and the oem looking ones but both need to be coded to run DRL and to have the bulb error codes which is a pain
+Bobby Shuart I really liked the UU ones and at times still wish I got them but I just couldn't justify spending double what I paid for these to get them. Haha.
Will these fit my 2016 Jetta sport
Yes they will.
What’s the led bulb that you put in it ?
For the headlight or the turn signal?
The headlights
Where did you buy these? I can’t find them.
These are all over Amazon, eBay, as well as ECS tuning. They are Spyder/Spec D units.
LINK TO led bulbs? and how much ?
The bulbs are just generic H1 LED bulbs from Amazon. I paid around $30 or $40.
Can you see the led drl at day?
Yeah you can, but it is not nearly as bright as some DRLs.
How do you replace the LED DRL if it burns out?
You would have to get a new headlight. However LEDs run forever. Well not forever but for a long time.
If you're tech savvy you can take the unit apart and wire in new LEDs but it is not meant to be replaced.
Focused Garage that sucks because I have already seen a few of them on the road with the LED out on one side. I love the look but it's an expensive "bulb change". On the fence at the moment. If only there was a "how to" video on how to change the LED strip
If you buy it from a good supplier who uses quality LEDs, You won't need to replace them. They last long time. Most burned out LEDs you see are cheap LEDs that got hot and burned out. We could do a DIY video about taking the headlight a part. That wouldn't be a big deal. It will be on a different headlight since Mike's still works. However, it will be the same concept.
I've had these over a year. Everything still works as it should.
Have the same grille and headlight set up
Good taste! I kinda wanna switch to the double "U" shaped lights.
@@FocusedGarage I've thought about that. It's just more common to see, only real negative with these in my opinion is you csnt see them well when it's really sunny
Yes the LED DRL is very dim in bright daylight.
Brand? And where did you get them?
Bought them from eBay. They are Spyder/Spec-D
What did you do to your badge? Is it a totally different badge or did you just plasti dip the stock emblem?
It's a gloss black painted badge with a white inlay from Klii Motorwerkes
So the DRL always run?
Yes, anytime the car is on, the DRLs are on.
Focused Garage how to drain your battery101 or since it’s LED the drain isn’t as bad as halogen?
Jesus Saves Bro the stock headlights have running lights as well that are always on when the vehicle is running
What LED's did you put in there?
These: www.amazon.com/gp/aw/d/B0711T9VWM/ref=mp_s_a_1_1?ie=UTF8&qid=1516649855&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=7507+error+free+amber&dpPl=1&dpID=51mlr0Ilm9L&ref=plSrch
Can you adjust the main lens at all. I actually bought a Jetta with these exact headlights. But they aren’t pointing at the right height. One is low and the other is a bit high.
Ken Schantz I bought a similar headlight, should be screws on the back that adjust
Thank you!
Yes, there are little hex screws that allow you to raise and lower the beam. Mine had to be adjusted as they were aimed like garbage out of the box.
what brand were they
Spyder/Spec-D
How was wiring? I heard that the guide for it isn't very good
These were direct plug and play. No wiring needed messed with at all.
are they plug and play??
Yes, no additional wiring needs to be done.
How do you aim the LED
The low beam and hi beam have adjustment screws on the back of the headlight.
Focused Garage you just go in w a flathead
link is broken
Do you wired them before installation or just plug in
They were plug and play.
What about the turn signal
What about it?
I thought it was led turn signal awesome look though quick question Mike what type of headlight 💡does it take ?
Ah I gotcha. For the turn signal I used an LED bulb from Amazon.
what year is your car? looks to have the facelift 2015+ grille but the link says the headlights are for the 11-14 mk6s??
This is a 2015 facelift. The ad lies. All MK6 Jetta have the exact same shape headlight. Only difference on facelift is bumper and grille.
@@FocusedGarage hey man thanks for the reply! just received mine for my 2015 facelift today im stoked! but question did yours have an extra wire on the bottom? i think its black red and white? what do you do with that?
It's for headlight leveling motors. You can leave it unplugged.
If you don't mind, where did you get the front grille from?
I got the grille from eBay.
I heard that there’s a check light on the dash when these are installed did you have this problem?
The only error I got was when using the highbeam. Other than that, they work perfectly fine with no issue. You can turn off the high beam error with vagcom or OBDEleven.
Everytime when you use high beam, the code turn on? Or just first time until use vagcom
Every time you use the highbeam. Unless you code it out.
My Jetta not except the led
Is blinking
That is not normal
If you see blinking in the video it's just the camera lens.
This not normal
What is?
will these fit a 16 as well? or is the fitment different after 2014?
Yes, they will fit a 2016 as well.
What's size bulb did you use?
These lights take an H1.
Did the sensor turn on the dash light?
Zero bulb out errors from these lights besides when using the high beams. That is easily coded out.
@@FocusedGarage how could this be coded out
Using VagCom or OBDeleven.
Hey, does the projector make the retrofit line when is on?
Yes, there is a cutoff line when the headlight is on.
Focused Garage Thank you! Another doubt, did you have to replace the switch lights too?
I replaced the switch with a Euro Switch but this isn't necessary. I just did it because I like the ability of having a parking light and fog light switch, not a simple on/off only like the factory.
Focused Garage Ok, so, the DRL turn on automatically when you plugged in the headlight?, thank you for the tip. I have the euro switch from factory
Any time the car is on with the ebrake down, the DRLs will be on.
Will these fit a 2017 TSI Jetta?
Yes they will.
Another thing how much was is to customize your front grill?
Bought the GLI style grill from eBay for $75ish dollars. Direct bolt on.
Will these fit a 2016 Jetta 1.8t SEL?
Yes these will fit that vehicle!