Ground Up: Building Justin's 240sx - EP.2 Steering & Suspension
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Welcome to episode 2 of the Ground Up build series!
On this episode we are diving into the steering and suspension, where we show you the disassembly/reassembly of the front and rear subframes, and give you a walk through of the parts to be installed. Justin also throws you some tips and tricks along the way to help with your own build.
We are trying to keep the parts budget low for this car, that way this series works as a great "How-to" as far as the parts you will need to purchase to build a grassroots drift car that you can drive to and from events.
Check out our website below for parts and accessories. And if you need service done, feel free to email us to set up an appointment. Thanks for watching!
factionmotorsports.com
sales@factionmotorsports.com
FACTION! Drift Club - Low Car Special Sticker
www.factionmot....
Video by:
@dannyheatzmedia (www.dannyheatz...)
Wish I had a team like this to build cars with 😖
This thing is gonna be rad. Please keep it red.
maybeeeee
3/4 impact thick socket on the puller works amazing to push the bushings out.
Everytime you open a diff and removing parts, you must do bearings preload!
Great video
Man hope you get more recognition quick alot better camerawork and content involved
Don't know why I didn't think about a pulley puller before for the knuckle and control arm bushings, makes life a lot easier! It's also staggering seeing the full parts layout and how much work/funds went into this... then you realize that was just suspension and probably only ~1/4 of the costs so far!
I belive we got a rough number for this car without labor and it was around 20-30k not including the car.
@@factionmotorsports THANK YOU. I wasn't subscribed and didn't get around to watching ep3+! I would have missed it if you didnt reply. Sub'd!
Cheers!
Also shoutout to the bushing burp at 9:59
Great video, nice work. very informationing
Thank you not niko!
Part 3 any time soon? I plan on doing this. I already have my subframe out.
@Clarissa Latner sure, go try and scam somewhere else.
Very nice, well put together
thanks, could be better but the videographer is new to this
Just popped up in my feed. One subscriber closer to 1k. 403 here. Keep up the good work.
Thank you justin!!!!
@@factionmotorsports thank you as well. I enjoy anyone willing to wrench. Even more so to take the extra time to film and edit. Your work is appreciated.
Good to see good preparation on the engineering side of things.
The right way todo it 👌🏼🇬🇧
Watching Justin makes me go from 6 to midnight
Good stuff.
Thanks uncle phill!
this thing is gonna be siiiiick
KILBURRGGGGGGGGGG
Yoooo my homie Ethan comin in all blurred😂 can’t see me!!
thats hans, not sure who this ethan cat is
Loving your channel. My sponsors are building me a ps13 for the 2020 season. I can’t wait to get behind the wheel.
Hell yea! Excited to drive as well. This is one of the 5 cars we need to get ready for this season
Bro how can I get sponsors for my bone stock s13? I saved up money but spent it on my wedding instead. Saved up money again and found out we are having twins, they came in very premature and my wife had to leave her job to take care of the twins while I worked. It ain't been easy but I doubt I'll be able to save up money anytime soon for the car. Babies are expensive, but love my twins to death, best thing to ever happen to me outside of meeting my wife. Thanks to this channel for the inspiration
@@SuperMaxCarp Congrats on the twins, thats really cool. Sponsors (or working partners) are not easy to find because nobody wants to give you stuff for putting a sticker on your car. I work 7 days a week for my partners and its becoming more of a full time job even though I am still at school a studying for my GCSEs. If you are interested in how I managed to get lots of amazing working partners I did make a vid in it. good luck and let me know if you have any more questions, I am always happy to help.
@@MaxCotton thanks for much. I appreciate the help. Keep doing what you do bro, good luck with school and car career.
Thanks @@SuperMaxCarp 👍
Nice video! Deff learned some tricks.
More videos please!!
We have some more now!
Good job! :)
thanks!
great video, keep going!
Thank you! We listened lol
I assume that that subframe going back into the chassis is an S14 as it’s superior to the S13 version, yes?
Why did you guys extend the lower control arms? I thought B Knuckle was designed to use stock control arm length.
Just what the owner wanted at the time. As long as the extension isnt over the top in length then you should be fine. I think this extension was a little bigger than S14 OEM length. That being said, I would personally try to keep stock s13/14 arms as well - Frankie
Very well done, boys 🤘🏼
Diff cover paint? That's cool
No sure what was used, sorry!
Badass
10:00 that burp 🤣🤣
Excuse me but can someone explain me what these rubber rings are (looks like a Tube for a bike???) what he uses at 8:38 is it because of the stretch? never seen that
Exactly! Helps seal the gap while air is being added.
Nice 👍
Maybe I missed it but what are the wheel specs?
Dope video , def going to replicate this on mine this season. What was that technique used with mounting the tires and the inner tube? Yall tube your tires ?
We will try to post a separate video about that later in the year. Follow our instagram! Its a trick to stretch tires.
use...a....torch..
Peep the subie engine in the back… RIP
In for the rest of the build!
plans for engine?
Whats the part number for the rear moog ball joint? Thanks!
What year is this nissan please
Nice content thing must
Feel like a brand new car aye?
what camera are you guys using ?
thats a question for dannyheatzmedia
sony a7iii
DannyheatzMedia sweet thank you!
Wanting to do a project turbo 240 during this quarantine but I gotta try and convince my parents to let it sit in the driveway😭
Hey great video. Is this car done yet??
Check our newest video in the series to see where it got left off. Still need exterior work.
what size fuel cell or tank are you going to use? im thinking about putting a 12gallon fuel cell in my s13 but not sure if i should go larger or not. LS2 swapped with T56 trans is getting put into it now.
I got a 15 gallon but after talking to a couple pros a 10 gal is enough if its just a track car. It's a weight game.
12:45
When you gonna finish this build?
Wouldn’t it make more sense to replace all that oem garbage for pbm suspension components?
Not if you are trying to stay on a budget and keep everything simple. OEM components are perfectly capable for what we need them to do. This whole series is really about using OEM parts and sticking to quality aftermarket when needed!
🤙🏼
move forward steering rack location?
We did not relocate the rack on this one but that is an option.
wheres episode 3?
When part 3?!!!
Where’s ep 3??
On episode 100million we restore the 240 to oem lmao 😂
song @2:16?