One other bit to consider on your approach, the TACAN station is not on the runway, it's off to the side. So while it will get you to the airport, it will not get you lined up with the runway exactly.
2:56 Looks like the HSI is bugged there which is the reason you had to intercept the course. You're pretty much aligned to the localizer at this moment and the TACAN station shows off to the right at about 70°, but it should be at about 64° on the HSI directly up front. So basically the HSI shows things TRUE instead of MAG, but you have to do the maths like courseline deviation with MAG still.
There's nothing wrong with the plane, or the TACAN. That's because, the TACAN is NOT aligned with the runway! :) You need to check on the map if the TACAN is offset from the runway or if it's lined up with it, like inner and outer markers (ADF) for example.
Cap - " You need to fly north bound to intercept the radial to merge with the other radial to land perfectly on the runway" Every Russian DCS pilot " FLY RUNWAY LAND RUNWAY"
After an update for the T-45 i don't have a ils click-spot anymore. only TACAN. How can i activate the ILS? Thanks for your reply/help. Best regards from Switzerland.
I have downloaded it, but animation of elerons, flaps, elevators, rudder dont work. The animation of control stick dont work. But i can control the airplane. Only gears animation work. How i can solve this problem?
Great job! The overview of ILS was exactly what I was looking for in the T-45C. Now to apply it to MSFS. Thanks.
One other bit to consider on your approach, the TACAN station is not on the runway, it's off to the side. So while it will get you to the airport, it will not get you lined up with the runway exactly.
Good point.
thank You for the info, I appreciate it very much !
You can select course on ufc and enter the course and press enter, works for me and quicker than pressing the osb lots of times
thx!
2:56 Looks like the HSI is bugged there which is the reason you had to intercept the course. You're pretty much aligned to the localizer at this moment and the TACAN station shows off to the right at about 70°, but it should be at about 64° on the HSI directly up front. So basically the HSI shows things TRUE instead of MAG, but you have to do the maths like courseline deviation with MAG still.
YUP! Still just about managed to bring her in.
There's nothing wrong with the plane, or the TACAN. That's because, the TACAN is NOT aligned with the runway! :) You need to check on the map if the TACAN is offset from the runway or if it's lined up with it, like inner and outer markers (ADF) for example.
Cap - " You need to fly north bound to intercept the radial to merge with the other radial to land perfectly on the runway"
Every Russian DCS pilot " FLY RUNWAY LAND RUNWAY"
Since this is a naval Aircraft: Fly boat, land boat! :P
can i use ICLS in this aircraft or just the ILS?
No Icls
@@dunbar555 ok ):
can i use TACAN for carriers?
I think it’s cool
You reference the T-45C NATOPS. Where did you find this?
After an update for the T-45 i don't have a ils click-spot anymore. only TACAN. How can i activate the ILS?
Thanks for your reply/help. Best regards from Switzerland.
The goshawk it awesome
Are we able to enter waypoints in the cockpit now instead of preentering it?
Not that I know of.
I have downloaded it, but animation of elerons, flaps, elevators, rudder dont work. The animation of control stick dont work. But i can control the airplane. Only gears animation work. How i can solve this problem?
There is NO keyboard binding for the rudder, WIP
@@aztec0112 Oh, thanks!
I can't get the TACAN to work. It only shows 000. Yes, the power is switched on.
The goshawk
first
Hi Cap, can the t45 use tacan on the carrier?
I think so yes.
Ok thanks, I have a mission with a harrier, f18 and t45. TACAN works with the harrier and f18 but not with the t45. Any ideas?
So it's not an ICLS then?
neg
I turn the TACAN knob, but nothing happens.....anyone with the same problem?
Switch it on the switch is next to the selector knob
@@sim_racing_jay_6870, did that,.... Nothing.
OK, started a new mission in the ME. Now it works. :P