How to lag or insulate pipes. This job is so important. Don`t get a burst pipe.
ฝัง
- เผยแพร่เมื่อ 22 ก.ย. 2024
- Lag your pipes and not only prevent burst pipes but also save money on lost heat by lagging your central heating pipes and hot feed from your tank or Combi boiler.......In fact lag everything.
Not the video you were looking for? Save further searching. We have over 350 plumbing/heating videos that you really can do yourself! There is also an ask `AL tab` tab on our website. www.dereton33.com.
Great video. Thank you for taking the time to make it. Your emphasis on use of cable ties is greatly appreciated.
No problem Robbie.
@@dereton33what size cable ties and how do you do it round stop cocks and pipes with earth wires
Thanks was scratching my head on this one but you've made it seem so simple. Thanks
No problem Michael.
I'm learning to do this tomorrow as part of my school transition year work experience, I don't know if you do anything similar in the UK but here in Ireland during our 4th year of secondary school (maybe year 9 or 10 in England?) we get a couple of weeks off to go work. I'm going to be lagging pipes and I decided I'll try and get a head start 😂
Ha ha yes we do the same thing here too. Good luck with it.
Who did you get on ?
Fast forward 8 years and a packet of 50 ties is no longer a pound, now it's a pound for each tie.
Time flies.
Many thanks for this. I'm not actually insulating anything, I just want to cover the rods for the mechanism for my up-and-over garage door so the car's tailgate won't catch when I open it. Didn't realise it was so easy to split prior to fitting.
No problem.
Thank you Sir! Nice and easy video that I had been looking for. Now to lag my 20meters of pipe. 👍👌
Have fun!
ive just started my apprenticeship 2 weeks and just yesterday i was told to lag a whole garage that had just had lots and lots of pipe work done with the boiler etc, and FOR ME it was such hard work as ive only started. Getting the corners and lagging tees was so difficult lol
Keep at it you will do fine.
@@dereton33 cheers mate
Probably a bit harder to do with the mitre box and I know this video is old, but with the newer lagging tools available that go around the lagging and have the angles cut into them that you can follow, like the Lag It for example, it makes doing tee’s a lot neater. You can basically cut a triangle half way through on the one piece of lagging, and then the other adjacent pipe that comes into the tee, you can cut the end of the lagging into a point which then fits into the triangle you cut out of the other piece. You probably know this by now but yeah just thought I’d mention it
Thanks Timmy.
GREAT INSTRUCTIONAL VIDEO! 👍👍
Glad it was helpful!
Thanks for taking the time out to make this video .....very helpful !
+lambros1956 No problem. Al.
For the Tee.. just do the same thing as you do for the L. Use the 45' for the left and right side.. and then for the center, cut a point. Then just tape the corner. sealed and done.
Hello again from Dublin Ireland 🇮🇪
Lovely place was last there in 1976
@@dereton33 changed a bit now you would be more than welcome back just got a toilet fixed 100 euros and the plumber said I need a new gas boiler I said how much 2200 euros 😂😂😂
do u need to lag central heating pipes under floorboards - or just pipes that are outside of the house??? thanks
Under the floorboards as well.
Why not use preformed elbows and tees. Much simple and neater job
should you lag both hot and cold pipes or just the hot?
Both.
I appreciate your helpful video, but over the years I've come to detest this foam plastic pipe lagging. The problem is that the stuff seems to be irresistable to and totally defenseless against mice: they will gnaw on it endlessly and soon turn a run of lagging into a pile of foam plastic crumbs. In fact this is often your first sign that you have mice. And the stuff is not cheap! The mice don't show the same interest in the old felt lagging.
The old felt lagging was great .
@@dereton33 Don't get me wrong, I'm not saying that felt is always better, only that it may be a better choice if mice are a factor like in many rural properties.
@@MrSwanley yes mice have chewed bits of mine. And urinated on it. It says on some website, “it won’t sustain vermin”, maybe not but they like to give it a good chew. It’s foul. You can get wool that you can wrap around, someone said mice don’t like that, don’t know if that was you, although I do know mice eat wool at times. And they’d still pee on it. You can get wool lagging from Wickes, it was possibly you that commented.
Thanks for making this. Nice and clear.
You're very welcome!
HOW TO TEST PIPE HEAT CABLE TO KNOW IT ITS STILL WORKING UNDER MY MOBILE HOME .i HAVE A FOAM INSULATING PIPE COVER OVER THE HEAT CABLE. SHOULD i FEEL THE PLUG WITH THE FIRST FOOT OF CABLE GETTING WARM IF IT WERE 38 DEGREES OUTSIDE?
Thanks Al - I had a couple of foot of 15mm copper pipe from my conservatory to my outside tap - I had used this kind of insulation but the pipe burst - onlu just got round to fixing it. Is this insulation OK for outside? Admittedly I didn't cable tie it - may be that was the problem.
Should be fine, when you turn the water off to the outside tap always open the tap to allow the water in the pipe to run out.
Would this be effective in a very cold loftspace to insulate pipes to a water tank ? Many thanks
Yes certainly.
@@dereton33 Even at say -5 , -6 temps ?
Many thanks , appreciate the fast reply
Great video. Many thanks
Thank you too!
Great guide 👍
Glad it was helpful!
When using your finger to split the lagging do it slowly, or you can get friction burns
Good advice.
Hi, this is so useful! One question though - I'm using this stuff to lag a condensate pipe that's bracketed to the wall. Any advice for what to do where the brackets are? The foam won't go around the back of the pipe as the bracket blocks the space.
You just have to cut the foam around the bracket Becky, there is not much else you can do.
@@dereton33 thanks :)
Hi Al (and Jan), Happy New Year for 2023! 😊 on the cable ties, would you suggest 1 every e.g. 5 inches with one (or two) at either end of an elbow? Recently had a copper pipe split when even though the pipe was flagged (old foam) so have bought some thicker foam and came straight here to find out what to do. Thanks!
Yes that would be fine.
Thank you for sharing this. Please where can these be purchased in U.K. for thicker pipes?
Local plumbers store.
@@dereton33 thank you
Hi Al, you mention using a mitre to make a cleaner end for the tee piece, what angle would you use for that piece? Thanks!
A 90%
Hello, im thinking of doing this because i want hotter water in radiators and dont want to waist heat throuaut pipes. Hawe you noticed any energy savings after isolation of pipes. Tnx for answer!!!
Yes and yes
Hi Al, thanks for your help.
My dining room wall has been showing signs of dampness near some boxed cold air pipes. I called a plumber who confirmed there was no leak. Pipes have a lot of moisture. Could this condensation be enough to cause dampness in the walls. I have lagged them but the smell is terrible.
Any suggestions apart from lagging. I have been here ten years and it's not happened before. Walls are stained upto 4 feet high
Much appreciated!
No the pipes will not cause enough dampness to condensate the wall. Lagging the pipes is still the best way to stop them condensating which you have done anyway. I would get a builder round to investigate for you.
Great video, thank you. I currently have waterhammer in my pipes and wondered if this lagging would be a decent way of muffling the sound?
Yes, absolutely
@@dereton33 thanks mate
What would you do differently if the central heating pipes were being buried in a cement floor?
Either drop from the ceiling in ducts or chop the wall out to conceal them. Or run around the walls in ducting.
@@dereton33 ok thank you! Will they require any additional protection from the cement to avoid corrosion? Tape or otherwise?
Thank you - Great advice.
Quick question for you, would you lag pipe that are on show inside the house? My house is old and I have two sets pipes that go or come from upstairs to downstairs. Would you lag? Thanks Stephen
Hi Stephen. I'm sure Al would agree with me. You don't tend to lag any pipes in living spaces. You only lag outside your house and in the loft, as you loft is regarded as an outside space. Have a great day.
Just wanted to make sure, just incase it was better to try and keep the heat to the rad. Thanks for the reply
Stephen Lyons Bernie is right, unless you do not mind the look of lagging on your internal pipes, looks awful.
@@dereton33 weird, there is lagging on my pipes in the kitchen. Pipes from the oil boiler come through the stone wall and run up and down walls in the kitchen. In an ideal world should they be behind plasterboard, or maybe boxed in? They’ve got some foam lagging on the ones near the floor, which has all been peed on by mice and chewed. Some of the pipe looks like it’s been painted over, don’t know what’s under the paint, it’s a nightmare really.
This is so helpful thank you
No problem.
Thanks. Really useful. What thickness of lagging are you using here? And what thickness is needed for 15mm and 22mm pipe going under floorboards? Thank you.
Pipe laging is a standard size of thickness whether 22 mm or 15 mm.
@@dereton33 Thanks for your response. So what is the standard thickness please? Is it 13mm? As I find options to buy 13mm, 19mm, or even thicker.
@@olliec1319 I’d get the smaller size.
Hi, thanks for all your tutorials, Ive learnt alot from you. One question please, I friend of mine wants an outside for he's working place, only way is to put the pipes through the wall and on to the wall. It's about 28meter long, what kind of pipes do you advice if I use? I have measured if I use copper pipes it's needs around 14 of 2meter one.
What's your advice please? Thanks
I would use 15 mm plastic pipe.
@@dereton33 Hi thank you so much for replying, that's pushfit fittings than? This isn't going under ground, it will go on the wall. I this case have to insulated the plastic pipes with 15mm insulation lag? Thanks
sr. the insulation work in cold and hot water
Great video, thank you! I need to lag a about 1.5 metres of CW pipe where it feeds from the boiler to the kitchen sink, as it's got loads of condensation on it. However the pipe is bracketed close to the wall, and also really close to the HW pipe - so close that foam lagging won't fit in between the two pipes (even the smallest size lagging), and it's really hard to even get foil insulation tape in between the two pipes. Would it be okay to lag the CW and HW pipe together - one piece of lagging round both pipes?
Not good plumbing practice that. The cold pipe will condensate with the heat from the hot pipe.
There’s a similar pipe setup from an Oil Boiler outside my house. The HW is next to the CW pipe, there’s a gap between them, but not by much. The previous owner of mine, in the kitchen seems to have painted over the pipes. I’m not sure what’s under the paint either……..
You probably won’t read this now, but you can get a wool insulation you can wrap round, guess that would be too thick too.
I dont use this thing and always naking nice elbows with kingspan lagging. I can do that job for you guys im based in London
Can I put the lagging on pipes that are already coming from my boiler to the wall as they get very hot and I'm worried the kids will burn themselves on them coz the pipes go low down and can be reached by the kids ?
Yes that's fine.
If your pipes are hot enough to burn someone you ought to turn the boiler stat down, especially if you have a condensing boiler
Pipe lagger pro. Do a demo when u get one
do i need to lag speedfix pipes
Cold mains priority 👌
How to box external gas pipe
Will upload soon
do you offer training
No, but you can ask questions via my web site.
Thank you.
No problem.
Just brought a mobile and lagging underneath. This is dead simple!
Loik souw