Ignition Timing Meter.This device display the RPM on an engine and the time between pickup and detected spark to show it in Advance degrees. Can be seen as a sort of "Timing Lamp"... More on Transmic.fr
@@transmiccdi8560 thanks you, another question , for programable cdi what parameter can be adjust by programing? Delay from pickup to fire point & curve or what else?
HELLO FROM 05753 IN USA I REALLY HOPING YOU CAN HELP ME I AM TRYING TO GET OR MAKE OR DESIGN A HI PERFORMANCE CDI OR ICM FOR THE HONDA XR650 2000-2007 THEY ALL SAME I HAVE BOUGHT A FEW PROCOM IT JUNK BIKE RAN TERRIBLE ANOTHER ONE FROM AMAZON WAS SAME THEY HAVE PROGRAMABLE CDI FOR THE HONDA XR650L IT ALMOST SAME BIKE HAS A BIT DIFFRENT CDI AND PICK UP TRIGGER ON STATOR OH BOY WHAT CAN I DO MY BIKE IS HIGHLY MODDED AND I NOT KIDDING I BET I WILL GET 8HP ON TOP END WITH 40 DEGREES ADVANCE ON TOP END CAN YOU HELP ME SUGGEST ANYTHING THANK YOU
Hello, If I'm not mistaken Honda XR600R is a AC-CDI and XR600L is a DC-CDI. thumpertalk.com/forums/topic/361630-cdis-differences-between-the-xr600-and-xr650l-cdi/ You have to be sure that the stator (high voltage) and the pickup are both OK.
Sir Thierry, So good to know about all the stuff you have introduced lately. I am a big fan if you remembered. Keep up the good deeds. cheers.
Hi Mastercircuit , it's been ages :-)
Does this work for 10000 rpm Want to use it for yamaha RD 350
Hello Sir the link for the Arduino code is not working anymore, can you share this please?
Hi, The code never was available to download. Sorry
Is the formula : rpm = hz x 60?
yes. The complete formula is actually: RPM = (60*FRQ*STROKES) / ( 2*CYLINDERS)
Which can be (in MY case) simplified in Hz*60
@@transmiccdi8560 thanks you, another question , for programable cdi what parameter can be adjust by programing? Delay from pickup to fire point & curve or what else?
indeed the delay from pickup to spark (the advance or retard), advance at kick start, crankshaft or camshaft and strokes. Hall sensor or VR pickup
Does it work on ecu?
This device expect a Hall or a Variable Reluctor (VR) as pickup signal. If the input signal to the ECU is different, it will not work.
how to make it
See: transmic.fr/2021/02/01/ignition-timing-meter/
I dont speac iggris,,bagai mana cara membuat cdi agar bisa di maping
This unit works ONLY with digital CDI ignition. It doesn't work with analog CDI like GY6.
HELLO FROM 05753 IN USA I REALLY HOPING YOU CAN HELP ME I AM TRYING TO GET OR MAKE OR DESIGN A HI PERFORMANCE CDI OR ICM FOR THE HONDA XR650 2000-2007 THEY ALL SAME I HAVE BOUGHT A FEW PROCOM IT JUNK BIKE RAN TERRIBLE ANOTHER ONE FROM AMAZON WAS SAME THEY HAVE PROGRAMABLE CDI FOR THE HONDA XR650L IT ALMOST SAME BIKE HAS A BIT DIFFRENT CDI AND PICK UP TRIGGER ON STATOR OH BOY WHAT CAN I DO MY BIKE IS HIGHLY MODDED AND I NOT KIDDING I BET I WILL GET 8HP ON TOP END WITH 40 DEGREES ADVANCE ON TOP END CAN YOU HELP ME SUGGEST ANYTHING THANK YOU
Hello, If I'm not mistaken Honda XR600R is a AC-CDI and XR600L is a DC-CDI.
thumpertalk.com/forums/topic/361630-cdis-differences-between-the-xr600-and-xr650l-cdi/
You have to be sure that the stator (high voltage) and the pickup are both OK.
Do you sell your dc to dc convertor?
The DC DC converter used in the DC-CDI in this video is available on the Shop at transmic.net
@@transmiccdi8560 can you share this code and schematic?
@@rofieasnan6085 Sorry it's not open-source.
Hi, how can i order this kit.
Thanks
Thanks for your interest. transmic.fr or transmic.net