I'd like to model a room, say 10x12x9, with R46 fiberglass insulation above the ceiling, R13 on 4 walls, and a heat source in the room to bring the room air temperature to 72F steady state. Everything around the room is an infinite well of sub freezing air. I want to measure the necessary energy input to the heat source. I'd also like to model PVC pipe manifold filled with a fluid, embedded in soil, the fluid pumped into a caste iron radiator located in the above room. Can you help me?
Hello sir in my model I change some parameters value but it can changes accour only velocity profile not any changes in temp profile what are the problem?
I'd like to model a room, say 10x12x9, with R46 fiberglass insulation above the ceiling, R13 on 4 walls, and a heat source in the room to bring the room air temperature to 72F steady state. Everything around the room is an infinite well of sub freezing air. I want to measure the necessary energy input to the heat source. I'd also like to model PVC pipe manifold filled with a fluid, embedded in soil, the fluid pumped into a caste iron radiator located in the above room. Can you help me?
Can you please help me in calculating avg nusselt no. In a 3d channel? In which fluid is moving in turbulence and a constant flux is at base
Yes
Hello sir in my model I change some parameters value but it can changes accour only velocity profile not any changes in temp profile what are the problem?
Hello, force or natural heat transfer?
@@engineeringtraining2024 natural convection sir
Can i ask why heat flux comes from side walls ? Why did u choose wall 4
It is dependent on your model and the boundaries conditions. You can use any boundary that you want.
Thanks
Welcome
can you help me to buid the heat transfer fluid flow
Yes, sure