How to Install a Keyless Entry System - Paano Gawing Keyless Entry ang Sasakyan mo?

- How to Install a Keyless Entry System - Paano Gawing Keyless Entry ang Sasakyan mo?
- How universal keyless entry works
A demonstration how keyless entry system can be used in different scenarios:
- Cars with full central lock system - these cars usually have an electronic button to lock and unlock all doors.
- Car with partial central lock system - these cars are almost the same with cars with full central lock, the only difference is the main door doesn't have an actuator and it doesn't
have a electronic button to lock and unlock the doors.
- and for cars without central lock system.
Product link: s.lazada.com.ph/s.Xg6aQ

[@edgarabeleda3236]

Napaka linaw po ng mga tutorial niyo sir madali masundan. Thank you for this video.

[@vallymie2106]

Thank you very informative step by step installation for DIY.

[@yoshuavillar]

salamat sa video, comprehensive at madaming matututunan. husay!

[@rolandosapad6957]

thanks sa demo boss,napakaliwanag na tuturial demo👌👍

[@virnemaranon9115]

Very helpful tutorial. Thanks!

[@saminm.guiahod3605]

salamat bro ang dami kong natutunan, diko kasi alam itong pangalawa itinuro mo, ang alam ko yong una pero nagawaan ko rin ng paraan na hndi na ako naadd ng actuator, ang pinutol ko ay wire ng actuator sa central lock kaya taas baba din xa at sumasabay dn lahat ng door

[@techguro7216]

Galing naman very informative dami kong nalaman.. salamat boss sa pag share ng kaalaman..

[@elainemaganda4382]

Thank you for this clear and easy to understand guide.

[@tamiobentula9125]

Thank you

[@haroldfabico1192]

Salamat po. Now makakabit ko n ung binili ko n keyless entry sa lazada. Mabuhay ka. Good job

[@PinoyBuysAndDIYs]

Ayos sir. Buti nakatulong👍

[@jeromeliquit5138]

Thank you sir, malaking tulong po, more power sa channel nyo.

[@doctormoto8742]

thanks idol malinaw ang pag kaka deliver..very informative video

[@franciscojrescarez2311]

Thank you verymuch for this clear and easy to guide explain.

[@johnclarencemagbanua-ed6sd]

Thank you sir ang clear ng topic

[@christopherraquel2675]

okeng ok boss ang vedio mo boss nakoha ko lahat thank you boss....

[@reynaldoenriquezjr.1383]

Very good explanation...thumbs up.

[@YummyFoodPh]

Very helpful tutorial Sir, ang galing mo mag demo. Thank you so much.

[@PinoyBuysAndDIYs]

Thank you din po😊

[@jesusbriones7297]

Salamat s Dios, may nakuha kahit konte..

[@raulbarrietta1404]

Salamat sa video tutorial. Galing!

[@judetadeomoneda5278]

Very Informative po,will try to ela tra 2017, not keyless. Thanks

[@eelhase]

Many thanks for the clear explanation!

[@PinoyBuysAndDIYs]

Your welcome sir. thanks for visiting my channel.

[@noelgatdula1202]

Very informative video bro. Thanks.

[@wilmarreyes5962]

Very helpful, thank you !❤

[@jogarcia7901]

Thanks a lot bro , napaka linaw Ng demo mo , na appreciate q effort mo.. more power! Nasundan q diagram 🙂👍

[@PinoyBuysAndDIYs]

Thank you po

[@junsoriano9415]

Thank you sir. I’ve done mine as easy as one two three. Thumbs up sa video mo. Easy to understand.👍🏻😍

[@PinoyBuysAndDIYs]

You're welcome po, I'm glad my videos helped you.😊

[@edgarphil]

@@PinoyBuysAndDIYs sir pakigawa ng Sa akin pausap usap na🤣🤣🤣

[@Justin88760]

0
0

[@darwinsantos7129]

gawa ka pa maraming videos mo sir.. very helpful talaga at sobrang galing mo in fairness.. hope marami mag like at mag subscribe sa channel mo kase it's worth naman talaga.

[@PinoyBuysAndDIYs]

Thank you Sir at na-appreciate nyo po.. Godbless po..

[@skylinebluesky7771]

Hello sir good morning may itatanung lang aq regarding sa keyless Entry ALARM SYSTEM kung na may LOGO na TOYOTA pero Ang sasakyan q NISSAN pwede q ba iinstall sa Nissan Yun? Ty

[@kid30lavilla2]

salute boss,, ang linaw ng pg kka explain

[@PinoyBuysAndDIYs]

Thank you boss. 😊

[@chocododoyaqil4162]

Nice demo. Thanks

[@PinoyBuysAndDIYs]

Thank you Sir😊

[@vedardalarm3328]

Excellent instruction thank you so much！

[@PinoyBuysAndDIYs]

Thank you..

[@xkaiyt5026]

very helpful info thank you po.

[@merkov8715]

Salamat sir sa pag explain. Nalinawan ako kung ano dapat kong bilhin.

[@PinoyBuysAndDIYs]

Thank you din po

[@markjhunbalansag5319]

Salamat boss ma solve kuna Ang problema ko

[@PinoyBuysAndDIYs]

Nice! 😊

[@dearyuss9051]

Salamat po PinoyBuys and DIYs

[@renantenalaza4518]

Salamat sa pagtotoro sir

[@JohnrayOfficial09]

Ang ganda ng pagka paliwanag mo sir salamat po

[@PinoyBuysAndDIYs]

Salamat din po sa pagtangkilik😊

[@maynardbercero8876]

Ordered items arrived today. Was able to wire up and simulate following your vlog. Very helpful and many thanks to you sir

[@PinoyBuysAndDIYs]

Thank you for your support 😊

[@romnilroberts8834]

Tnx! wel xplained.

[@THEADVENTOURS]

Very informative bro.
Well explained

[@PinoyBuysAndDIYs]

Thank you Sir😊

[@mistergreen6557]

thank you.. natapos ko na sa akin

[@user-yf8oy8jr9v]

galing ang linaw lods

[@franciscojrescarez2311]

Thank you.

[@toytv_17]

Napaklaro, thank you! More power sa channel mo!

[@PinoyBuysAndDIYs]

Salamat po.

[@russelmagsalay7809]

Tnx😊

[@alfredoflorenciojr.8817]

Galing boss god bless

[@kuyafrankiethetransporter7104]

Salamat its clear

[@PinoyBuysAndDIYs]

Thank you din po.

[@vinau2fix517]

Thanks for the info. New friend here. 🙂

[@jimaralad-ad3698]

Daghang Salamat Bro.

[@jefnimation]

wOw 😮, thank you so much for the clear detailed demonstration and easy to understand.. i did subscribe your channel..

[@PinoyBuysAndDIYs]

Thank you po😊

[@romelcampos8073]

Idol, salamat sa idea, recquest sana, yong nessan urban350 naman po, paano ikabet yong keyless,

[@mackoytvkuntingkaalamancha3491]

Good job sir idol pasout out po salamat.

[@rhajibasadil2944]

thanks po

[@blisskethcueno5319]

Slmt sir

[@leonalvarez8269]

kudos and thumbs up

[@PinoyBuysAndDIYs]

Thank you po, sana nakatulong.. Godbless..

[@darwinsantos7129]

keep it up!!! ⭐⭐⭐⭐⭐

[@richardricarte8305]

Sobra linaw bro.

[@PinoyBuysAndDIYs]

Salamat Bro.. Godbless

[@brums7743]

Maganda alternative siguro sa power window line is gawing “follow me home “ system lagyan lang on/ off switch kung gusto mo i disable at isang relay. Balak ko din bumili neto kasi ty sa idea.

[@PinoyBuysAndDIYs]

Magandang idea yan ah boss.. pwede.. sa mga bagong sasakyan ngayon ganyan... thanks. Try ko implement. Padaanin ko nlng sa relay. Thanks thanks.

[@brums7743]

Ok po, subukan ko din, thanks po

[@Fast_Lane_RC]

unfortenetly this has no auto trasnlation, at least for me, but even without understanding the language the video was very helpful thank you.

[@PinoyBuysAndDIYs]

Thank you sir, will try to add subtitle on it.😊

[@Fast_Lane_RC]

@@PinoyBuysAndDIYs hello again, i wanted to ask if the turn signals output from the entry system box, is measurable with a multimeter when you close and open the doors?or you can only do it using a test light?i have 0 volts coming through the brown wire. My box is conected on a negative on the body of the car, does it have to be to a negative from the batery or works the same?thanks in advance my friend

[@PinoyBuysAndDIYs]

@@Fast_Lane_RC @Ricardo Pires you mean measurable when you lock/unlock using the remote? Yes, it should show a voltage, however that will just be quick because its just a blink, so it depends on your multimeter, if it has a delay, it might not give you a result, that's why using a test light is better in that case.
For the ground, yes as long as your car body has a good ground, it should work the same. You can test it using your multimeter. Give it a positive line from battery then tap the other probe to body, if it gives you a good 12v, then you got a good grounding.

[@Fast_Lane_RC]

@@PinoyBuysAndDIYs ok that was exactly what i was asking my friend thank you very much for your help, i will try to measure again using other multimeter i have, i might buy a test light cause its not the first time i need it. peace

[@PinoyBuysAndDIYs]

@@Fast_Lane_RC you're welcome sir👍

[@shawnsavage9015]

Good video! How do you cut the remote key?

[@robertsabasa6467]

Thank you for your DIY detailed installation.. mabuhay ka brader…🎉🎉🎉🎉

[@KristaKyuEunHae]

Thank you for this sir. Napaka informative

[@PinoyBuysAndDIYs]

You're welcome po

[@KristaKyuEunHae]

​@@PinoyBuysAndDIYs Sir, question po. Yung nabili ko po kasing sasakyan, Nissan, nainstallan na daw po ng keyless entry noon kaso nawala po yung susi. Need po bang palitan yung mismong keyless system? Or kahit yung pinaka susi nalang po nya? Sorry po, newbie po kasi ako sa sasakyan since first car ko po ito. Salamat po

[@PinoyBuysAndDIYs]

@@KristaKyuEunHae kung makikita nyo po ung module ng keyless entry system, check nyo po kung may button sa likod. Pwede po kcng mag learn ng new remote ung mga universal. Usually long press lng po un then pindutin ung univerasal remote.

[@KristaKyuEunHae]

Ayun. Maraming salamat po Sir. Sobrang helpful po sa newbie na tulad ko. Ang helpful po ng videos nyo, new subcriber po ako😊

[@PinoyBuysAndDIYs]

@@KristaKyuEunHae you're welcome po, thank you din.

[@elrickjohnocliaman4398]

Ayos

[@CARAIRCONTECH]

nice bro

[@HomeLaptopCasiano]

nice

[@kristianguabangeles379]

pano po yung sa remote trunk release? very clear ang tutorial idol

[@thoremberda3628]

Thank you sir for the helpful and clear tutorial video on keyless entry installation, by the way, can you share me the link of the supplier on keyless set where you bought sir. Looking forward to see more of your nice and clear tutorial videos. Thank you, stay safe and God bless🙏

[@PinoyBuysAndDIYs]

You're welcome Sir, inupdate ko na po ung description pra sa link ng product.😊 thanks for visiting my channel pa-subscribe na rin po😊 Godbless😇

[@thoremberda3628]

Sir gd day, na install ko na keyless entry sa vios ko, and i use the fig 1 diagram, pero gusto ko sana magkaroon ng tunog or siren pag nag lock at unlock, kaso iba ksi yng nabili kng keyless entry system yng walang led light na blue, puede kaya to sir. Thank you

[@PinoyBuysAndDIYs]

@@thoremberda3628 walang lahit anong indicator? Pero meron pra sa flasher sir?

[@lentecreatives8886]

So kapag bumili po ako sa lazada ng ganyan at randomly mag unlock sa parking na naka keyless entry. Possible po ba yun or nka bind lang si remote key sa remote module?

[@makiragamakinis8806]

Goodday po sir,pwdi po ba niyo e demonstrate kung paanu mag tap o ikabit yung wire para sa signal po?Thank you!

[@winstoncunning5427]

WOW yes you

[@casianojrremodo3485]

salamat Po sa informative video mo. Nag DIY Ako paps Ang problema ko Yung sa signal light left side lang Po Ang nailaw Yung 2 brown wires nakabit ko naman sa linya.

[@earlabella4579]

boss dun sa number 2 na sitwasyon..na sinabi nyo.. ung partial pwede ba gamitin ung master actuator? yung 5 wires..., o yung single slave actuator lang? na may 2 wires?

[@dovids4169]

Pwede po pa demo yung sa Fig.3 naman. if positive signal ang kailangan? thanks!

[@archangelnevoya3785]

Nice video paps.. question lang sana, wala sya wires for siren, paano sya lagyan ng siren kung sakali paps?

[@ramilesmadelar6643]

Sir , sana meron din yung connection ng para sa mga van na may sliding door na may electrical contact.

[@edwinsamson6222]

Sir thanks galing
Concern ko lang sir pano hook up yung horn pag sabay sa lock at signal light sana matalakay mo thaks again, good luck

[@__________________________4684]

nakita ko review mo sa lazada npdalaw ako dito paps!

[@PinoyBuysAndDIYs]

Ayus paps. Sana nakatulong ako sa project mo..🙂

[@rufertmanio8314]

Paps, saan kukuha positive supply yung actuator ng trunk release? Thanks..

[@brenerynerbrenerynerybryn9287]

ayos ang video kumpleto ang paliwanag. boss safe po kaya ang receiver ng keyless, iniisip ko lang kasi universal sya kaya baka madali makopyahan ng same codecs ng remote at madali mabuksan ng ibang remote? salamat..

[@PinoyBuysAndDIYs]

Yan hindi ko masasagot sir. Pero i believe safe naman yan, matagal na ung mga universal keyless entry system. Hindi naman basta2 macocopya ung code nun unless hawak nila ung remote mo to copy using a device..

[@yhudz7298]

sir tanong lang halimbawa parihas ang keyless entry frequency ninyong dalawa nag DIY ma oopen ba nya ang kotsi ng isa?

[@alexanderbindo3750]

Sir pwde po b gawin yan sa hi ace 3.0 2021 model

[@ajyaguso6995]

New subscriber here: Thanks very clear explanation.

[@PinoyBuysAndDIYs]

Thank you😊

[@noviemarilao5143]

New subscriber here..may tanong lng boss may keyless entry ba na may auto fold ng side mirror

[@severinoarraro5821]

hello sir ask ko lang
yung sasakyan ko meron ng central locking
may naka install na module para keyless entry
isang actuator lang ang ginamit nakalagay sa driver side at 2 wires pang blue and green
nung icheck ko ang actuator ang hina ng galaw ng motor ng actuator
nung itap ko derekta sa battery malakas naman
bali buli ako ng bagong actuator ganun pa rin sir mahina parin ang motor halos di nya ma itulak yung rod ng central locking
2nd hand sir nabili ko yung Hyundai getz 2004
possible ba na luma na yung module kaya mahina na supply ng kuryente para sa actuator?
salamat po sir aa sagot 😊

[@harold1212121]

Jan din po bang banda sa ilalim ng manibela makikita ung pag tatapan ko ng wire para sa signal light? Para sumabay signal light pag nag lock?

[@olivertulod]

galiiiing hihi

[@PinoyBuysAndDIYs]

Thanks😁😊

[@msgtmarivelesqci450msg9]

thanks much sir pwede ko na pala lagyan ng keyless yung car ko.tanong ko lang kung same lang ba lahat ng color coding ng mga product na keyless .or ano pala ang brand ng keyless system na ginamit mo sa video para yan lang bilhin ko.new subscriber here feom cebu.GODBLESS you always sir.thanks

[@PinoyBuysAndDIYs]

Nasa description ung link sir.. iba2 po sila ng colo coding. Minsan may pareho. Pero usually naman sir meron silang diagram katulae ng sinundan ko.. thanks sa subscribe po. Godbless din.

[@user-dl7pn6gh4v]

sir ung actual mo s last vid. nka 5 wire b ung main actuator o 2 wire lng?

[@astralcomm7925]

pwede po kaya ilagay yan sa existing oem door locks ng oto?

[@johnvincentbaylon8048]

Sir tanong po bakit may Delay sa pag remote ng keyless entry? maghihintay k ng 10 seconds bagu gumana ulit.. tnkz po sa sagot

[@christianmarkbonifacio622]

boss ask kolang po. yung car ko kase ayaw yung key remote pero ok bat. the pag sinusihan mo at nag off yung central lock sa driver side lang gumagana. kaya po ba hindi gumagana kase yung 3 door hindi rin?

[@shakurcarnales3484]

sir, san pala icoconect ung wire na pag nag-unlock e mghahazard?

[@fillaurencebarba6414]

boss, may ganito akong remote pero gusto ko i mute ung arm/lock unlock, paano po gawin?sa manual kasi ang pag mute kelangan ung bell icon na switch kaso parehas tayo ng remote, lock unlock at trunk lang meron

[@RobertOrdanza-ej9dg]

Anim na wires lang gagamitin para sa central lock
Red para sa B+ o Positive
Black para sa B- o Negative
Yellow at Yellow with Black kasama sa Negative
White Close signal
White black Open signal
Yan lang para sa lock system.

[@PinoyBuysAndDIYs]

Thank you po sa comment. Stay safe po.

[@rl29tv84]

Hello po sir same po ung nbili ko sa demo m na keylesa entry bka matulungan u po ako napindot ko kc ung programing sa modular niya diko naman na mapagana modular nakailaw nlng ung light indicator niya sna matulungan niyo po ako salmat & godbless

[@CatalystDrn217]

Sir san niyo po tinap yung sa trunk release? Mraming salamat po video nato, laking tulong sa mga gusto magDIY

[@teresitaliwanag3496]

Magkano pagawa ng susi, after market ang remote, hiwalay ang susi sa remote. sa montero glx model 2015.

[@josebelmancanoy8104]

sir pwede na gamitin ang car alarm at acquator na keyless entry at pwede rin imannual switch ang mga door yong lock at unlock niya. salamat pwede po ma mag vlog ka kung paano gawin

[@PinoyBuysAndDIYs]

Hi Sir. Thank you for watching and subscribing po.. Sige po ipila ko po sa mga iDIY tutorial ko.. Godbless po.

[@alk1d0]

Sir, sa Mirage G4 na may central lock ba pwede direct signal, maituturo mo ba yung wire color? May nabili na kasi ako, ikakabit ko lang. 5 wires yung actuator sa driver side. White, blue, black, pink, violet. yung motor nya ay pink at violet, san ba d2 ang signal ng negative at positive input. Thanks

[@PinoyBuysAndDIYs]

Sorry Sir hindi ko kabisado mga kasasakyan. Pero may common way naman para macheck mo ung mga lock and unlock triggers. itap nyo lng po ung positive line sa wire ng tester then ung pen tip isa isahin nyo po ung sa socket while pinipindot nyo po ung lock unlock button. Pag sumabay sa pag pindot ung pag ilaw, un na po un.
Hope makatulong po yan.

[@i.cristopher1877]

Meron po ba video na installation para sa walang central lock?

[@christopherraquel2675]

boss paano mag wireng ng kill swicht sa car.....

[@markbuenaventura8815]

Boss san ba ikakabit yung positive at negative sa mismong kotse gusto ko unlock at lock lng e salamat boss

[@FallenNight1000]

Boss ask lng po pra sa signal light for Vios 2019 with existing central lock.
Bale nakabit po ng tama ang pra sa lock/unlock feature and working properly n sya. Balak ko po sana ikabit din pra s signal light pero clueless npo ksi ako in terms of circuit. San po b sya dpat i-tap pra s signal lights, sa main fuse box, sa dashboard fuse box or hiwalay sya n system altogether?
Thank you po!

[@PinoyBuysAndDIYs]

Pwede pong diretso sa wire ng signal light po. Kaso personaly hindi ko po nilalagay un. Kc nag ooverlap sya sa intervals/timing ng flasher..

[@skylinebluesky7771]

Good evening sir may itatanung lang Po aq. Paano Po Ang connection Ng central lock switch from driver side to passenger side sir? Kahit drowning lang sir ty