VERY INSTRUCTIVE VIDEO!! GREAT JOB BROTH!!! DO YOU PLUG IT VIA LOOP EFFECTS OF YOUR AMP? AND THE SETTINGS OF YOUR PRESETS ARE IN PARALELL/ SEMI/ OR SERIAL'
Hi there, Made it myself from alu-plate. Made some bridges in alu to mount the other panels on. Connections to bare alu cause less noise in youre system.
I dont remember it, but i have an answer. Now i use a 500x from line 6 with spectacular results. After 50hrs setup. Set the moddepth to 8% and the effectspeed of the mod between 85 and 95% Soon i post videos of this divice.
Hey there Bart. I've been considering the Liverpool and the British for use with my Nova System in order to go direct to the PA at church. What are your thoughts on these character pedals? Thanks and fantastic tone!
Hey, I think you have to put your drive pedals in front of your nova. Otherwise your effects (eg delay, chorus, ...) ar all distorted and you have no clean effects from the nova. Be carefull with input volumes, they do affect the sound of the nova. Connecting the system on a PA is no problem, just roll off the high a bit on the PA. Also try the speaker simulation on the nova or the tech 21 buttons if you have V2 versions of these pedals. If you want a real amp tone, you can link the chain trough a little amp and use the headphone or line-out from the amp to the mixer. Sound difficult, but it is verry easy. I use a vox pathfinder and it sounds amazing. Even better than some good tube amps. I use this setup to practice, but not with the nova, only with a hd500x. On stage-performances i try to get that tone out of one of my tube-amps....but... It doesn't. Ive got the good push and headroom, but not the right tonecolor. That little vox pathfinder is the holy greal. ill try to post some new soundsamples. I've learnd alot trough the years of experimental use of effects. Sorry for the bad english Regards Bart
Hey, I,ve got a new board for 2years now. As i remembered the drives wired in front of the nova. Because the shimmer is a lower quality pedal, i've put it in boss a/b box and mix it at the end of the chain with te total sound. Be carefull with the output levels of the drives. It can mess up your sound seriously. Try to have a normal output level to put in the nova. Dont cranck it up.
Cheers Bart. Very useful info.
Everything serial in front of a clean amp. It's bin a few years back that i had the nova. Gigging the L6 helix now
Thanks bart for setting this up and sharing
many thanks for sharing.
Have you ever had any problems with using OD pedals with the Nova System? Mine seems to cut the volume of them dramatically.
Great video. Did you have the cheap reverb and the NS connected into the FX loop of your amp???
No, i did not. Just like the edge himself. The magic happens when you put it in front of the amp. Dont drive your amp to much.
VERY INSTRUCTIVE VIDEO!! GREAT JOB BROTH!!! DO YOU PLUG IT VIA LOOP EFFECTS OF YOUR AMP? AND THE SETTINGS OF YOUR PRESETS ARE IN PARALELL/ SEMI/ OR SERIAL'
Love the pedal board. Where can I find it?
Hi there,
Made it myself from alu-plate. Made some bridges in alu to mount the other panels on. Connections to bare alu cause less noise in youre system.
Hi !! Perfect video
Do You remember how to set up the modulation sección in the nova for get the U2 efect ?
Thankyou
I dont remember it, but i have an answer. Now i use a 500x from line 6 with spectacular results. After 50hrs setup.
Set the moddepth to 8% and the effectspeed of the mod between 85 and 95%
Soon i post videos of this divice.
Hey there Bart.
I've been considering the Liverpool and the British for use with my Nova System in order to go direct to the PA at church. What are your thoughts on these character pedals? Thanks and fantastic tone!
Hey,
I think you have to put your drive pedals in front of your nova. Otherwise your effects (eg delay, chorus, ...) ar all distorted and you have no clean effects from the nova. Be carefull with input volumes, they do affect the sound of the nova.
Connecting the system on a PA is no problem, just roll off the high a bit on the PA.
Also try the speaker simulation on the nova or the tech 21 buttons if you have V2 versions of these pedals.
If you want a real amp tone, you can link the chain trough a little amp and use the headphone or line-out from the amp to the mixer. Sound difficult, but it is verry easy. I use a vox pathfinder and it sounds amazing. Even better than some good tube amps.
I use this setup to practice, but not with the nova, only with a hd500x. On stage-performances i try to get that tone out of one of my tube-amps....but... It doesn't.
Ive got the good push and headroom, but not the right tonecolor. That little vox pathfinder is the holy greal.
ill try to post some new soundsamples. I've learnd alot trough the years of experimental use of effects.
Sorry for the bad english
Regards Bart
Bart De Bruyne Thanks Bart. Seriously great tone. I'm getting a Pathfinder I think.
Hello ! Could you share the way you wired and plugged the stomp boxes through the nova system?
Thanks
Hey,
I,ve got a new board for 2years now. As i remembered the drives wired in front of the nova. Because the shimmer is a lower quality pedal, i've put it in boss a/b box and mix it at the end of the chain with te total sound.
Be carefull with the output levels of the drives. It can mess up your sound seriously. Try to have a normal output level to put in the nova. Dont cranck it up.
no herdim pick??? big ingredient missing
Nope, just a delay video for the nova. And i don’t have a cap or a beard 😆