3D Printed 8th scale ford focus rs part1 /how to design printable model in SketchUp/ Scale Addiction
ฝัง
- เผยแพร่เมื่อ 1 ก.พ. 2021
- 8th scale file👉 : cults3d.com/en/3d-model/game/...
10th scale file👉 cults3d.com/en/3d-model/game/...
In this video i will show how i 3D Printed 8th scale ford focus rs in 8 sections, if your 3d printer bed big, you can print it in less than that, the 8th scale ford focus rs 362mm wheelbase and 308mm in width and also the stl file available in 10th scale 262mm wheelbase and 200mm in width and also i will show a parts how to design printable model in SketchUp,
this is an easy way to make rc car scale body(shell) at home and painted it however you like
🔔 Hit the bell next to Subscribe so you don't miss a video!
Follow my Instagrams so we can be best friends
-------------------------------------------
/ wheelshobby
/ alimechh
Like my facebook page:
-------------------------------------------
/ scaleaddiction
**If the video was fun, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : / ali.hoshyar....mm wheelbase and - ยานยนต์และพาหนะ
![ใจดำกับฉันก่อน - วงทัพห้า [Official MV]](http://i.ytimg.com/vi/I48wa4qurAU/mqdefault.jpg)
Best one you’ve done so far
Thanks for turning in, yes man
Thats amazing! I got a 2006 vw golf and i want to print it out now! I think I'm going to use tree supports to save on filament
That's awesome, good luck 🙏🏻🙏🏻
Beautiful!
✌✌🙏🏻
I love the vids man! Keep it up!
Thanks, I will
Big 😊 and a lot of filament. Great result 👍👍
Lol yea, no worries I put 10Ib spool felament on my printer lol
Awesome! I Love the focus RS
Thanks
👌👍
I make my bodies only 1.5-1.75mm thick (almost always from ABS or ABS pro/+). Being that they're too large for a single print, I make sure to put my cut-lines so that I don't need to print w/ a lot of support. If need be, I'll design custom supports so the print is more efficient. After printing, I glue everything together, with homemade ABS glue. I also lay 3/4oz fiberglass inside and use the ABS glue to bond it to the shell. The material is >.5mm thick so the final shell thickness is close to what you're achieving from a print. However, the final shell is exponentially stronger than without the cloth. Depending on the type of vehicle this goes on, I'll even spray the inside with FlexSeal rubber coating. It does add some extra weight, but if it's just a shell body it's no big deal and the shell gains even more strength and resilience. For exterior finishing, I brush acetone over the shell with an acid brush. Don't let it sit, keep it moving until dry (acetone evaporates). This doesn't take long, but don't work in large sections. This helps reduce the exterior layer bumps far faster than sanding. I, then, media blast it and clean it off. If need be, I'll repeat the last 2 steps, over small areas. What would normally take a day to sand only takes about 45-60min. You also, don't need to use filler primer and sand and prime again and again. Krylon Fusion primer, a light sand, and I start spraying as normal.
Very nice 👌
Thanks Vitor
Hi Ali.
Do you have the Stl. For the front and rear lights covers/lens.
I purchased the Ford Focus RS on Cults.
Car body and mirrors only ?
Would really appreciate it, If you can share the PLS 👍🏻
Hey, yes I will make it and upload it on cults, you will be able to download it for free
Thank you Ali.
Can't wait for the upload of your Stl.files on Cults.
Your a real inspiration. 👍🏻
Awesome job!! You would like to see my homemade 1/5 49cc RC car!!
I'll check it out!
Top could do Saveiro surf with open doors
How do you model the 3d model? I know it's using SketchUp, but how do you do it?
Hi, great job !!! what's the reference of your 3d printer ? ludo
Nice video !
Thanks 🙏🏻
Hi what material are you printing this, is it PLA or something else? I just downloaded it. Thanks!
I use pla, its easier for sanding
You should try blender, the subdivide function help to remove side effects when printing big models with 3d not fine enough. Looks fine even!
For my next video, I used different way to design soother, blender didn't work for me
Can you make Focus Mk1?
Would this body fit on a Traxxas slash? I know other 8th scale bodies do.
No, the wheelbase different
Is it your camera or is the car short like that compared to the 3d file? It looks like its stretched
I had to stretched for my 8th scale chassis
1/8 châssis (off road) are not "scale" that's why it not easy to make realistic body. Trick is to make little higher . I think focus is rather nice stretched
i designed toyota yaris wrc car, with some of my upgrades but because of im kinda new
assembly point of right and left side is kinda looks awful, just wanted to mention
That's awesome, great job
Are there files for the lights as well or are they seperate?
Yes the 8th scale comes with headlight and taillight covers
@@scaleaddiction there are not lights file for 1/10? How did you do clear widwos?
Not for now, but I will add it, I'm using lexsan sheet for the windows
I bought the model,now I start to print
That's awesome
Please print a 1/10 ford fiesta mk1 body please
How come the body is so pixelated. You need to export the model with a much higher poly count so it prints smoother. Also super glue and baking soda can help fill in all the gaps better and add strength.
This is my old designs, if you watched my last video, my print looks much smoother now
Looks like 400 hours to me
Smart thing to do is pull a mold for vacuum forming
I will do in the future, I'm planning for it
what is the model dimensions?
This body 362mm wheelbase and 308 in width
Nothing in this video about to design in Sketchup - What a scam title!!