Just a tip, same as sandpaper but a wire brush will lighten up the stain as well and allow you to get in and around the knobs at the base of the antlers.
Excellent tutorial! I really appreciate your replies in the comments as it helped me understand the tradeoffs use have used vs other methods. Could you show close ups of the nose s of the big batch you completed please or describe how much is left intact? I like leaving a bit of the nasal bones if possible by not using a pressure washer but just a garden hose with pinpoint nozzle for "up the nose" spraying, and then picking out the residue, but it take SO MUCH TIME to get them really clean. Your method is so much quicker. What is your experience on how to not totally blow out ALL the nasal cavity bones?
Looks like you should be giving Ryan Olsen and Whitebone Creations a little credit. Can't leave the young heads in with the old ones. Get too hot. Stellar work young man.
Excellent video. Same way with a few exceptions. Every deer skull looks similar and it is the antlers that make it unique. The Hunter may have some sentimental attachment as well like my Grandson's first Buck deer. We had him on camera making rubs so the trash and bark in the antlers was an important part of the Bucks life. We wrapped the antlers and left the shredded tree in the rack. Character. If I knew how to post a picture here I would show you the doe he shot last year. Very unique and his very first ever deer so I did something special.
I’m Florida, I’d remove the hose and then stick em on a fire ant mount. Come back and check it once a day till cleaned out. The bigger the mound the better. I’ve had em strip em in a day, day and a half before. Then you boil it to her the remaining ants and sand out. Finally soak in commercial grade hydrogen peroxide to whiten it and a coat of clear enamel. The ants did 90% of the work! LOL
Thank you for replying! I have been doing skulls with beatles for friends and family. But it is slow. I liked the speed and efficiency of you processes. Great video!
Man I would not recommend your method to anybody, your not boiling your skulls long enough or using the right ingredients, I never have to take a drill or long needle nose scissors for the nasal cavity, I use a sink and a pick and it comes out just fine
Don't ever paint a skull white just put in the work to get it white only use paint if it's a paint hydro dip. A customer doesn't want a white skull that's been painted white
Couldn't really see what you were doing after you punched the ear area out. You need two cameras or put your camera in several different locations. Stop and move your camera, then start again if you want to make a really informative video.
Personally, I don’t like the snow white bleached skulls. Don’t seem to have much character. I just dig mine in the dirt, let the maggots and bacteria take care of the flesh, and then you can boil the skull for a little bit to disinfect it and take small tools to scrape out the cavities. Then I like to smoke it and spray with clear gloss enamel. Good video
Mop and Glo??? If anyone's wife goes to wash the skull in a few years it will wash the Mop and Glo right off, that is the way it's meant to work. Every time you wash the floor it will remove the previous application. Something like a spray wax like any dusting spray would work better. And lose the music, it just doesn't fit this video son. Otherwise you did a fine job.
I am 67 years old and I am impressed. This is one OUTSTANDING video. Good job young man.
Thank you Mark!
Just a tip, same as sandpaper but a wire brush will lighten up the stain as well and allow you to get in and around the knobs at the base of the antlers.
Very nice job young man if you were in my area I would have you do my heads an lots of other people s too really nice work Ray stein
Excellent tutorial! I really appreciate your replies in the comments as it helped me understand the tradeoffs use have used vs other methods.
Could you show close ups of the nose s of the big batch you completed please or describe how much is left intact? I like leaving a bit of the nasal bones if possible by not using a pressure washer but just a garden hose with pinpoint nozzle for "up the nose" spraying, and then picking out the residue, but it take SO MUCH TIME to get them really clean. Your method is so much quicker. What is your experience on how to not totally blow out ALL the nasal cavity bones?
I typically don’t worry about messing up the nasal bones too much. Just get it clean and move on.
I wouldn't use galvanized pot. Could be letting off some poisonous gasses
Looks like you should be giving Ryan Olsen and Whitebone Creations a little credit. Can't leave the young heads in with the old ones. Get too hot. Stellar work young man.
Absolutely! Watching Whitebone creations got me started and then I started doing my own thing after that. Ryan Olsen is phenomenal at Euros
Excellent video. Same way with a few exceptions. Every deer skull looks similar and it is the antlers that make it unique. The Hunter may have some sentimental attachment as well like my Grandson's first Buck deer. We had him on camera making rubs so the trash and bark in the antlers was an important part of the Bucks life. We wrapped the antlers and left the shredded tree in the rack. Character. If I knew how to post a picture here I would show you the doe he shot last year. Very unique and his very first ever deer so I did something special.
Thank you. Yes each deer is unique. I have left the tree bark on the base of the antlers before as well.
I’m Florida, I’d remove the hose and then stick em on a fire ant mount. Come back and check it once a day till cleaned out. The bigger the mound the better. I’ve had em strip em in a day, day and a half before. Then you boil it to her the remaining ants and sand out. Finally soak in commercial grade hydrogen peroxide to whiten it and a coat of clear enamel.
The ants did 90% of the work! LOL
What do you think about jaxex for whitening and sterilizing? Awesome video
Thank you. I haven’t tried jaxex before so I can’t say.
Good video
Nice job they look great.
Nice job!
Look good. But going to have grease issues down the road..
Well done the Ryan Olsen way that's how I do mine as well been doing it for 6 years and two years as my full time business 🙂
How much does something like this cost?
I charge $125 for deer.
@@jennc8554 I charge 100 plus tax
Great job me and my boy enjoyed watching it and can't wait to try and follow your steps plus those were some good deer where you located?
Thanks, I get deer heads in from all over
@@favidjenden3612 Don't you lose the natural color of the antlers that way? By bleaching the skull, you can preserve the original antler color
Great video thanks for sharing
Those look great nice job man
If ya don't mind what yall charging Fer a euro deer. yall done such a nice job on these.
I charge $125.
Good job!
What is the whitening solution that you use
32% hydrogen peroxide. I get it from the feed store then mix it about one gallon peroxide to three gallon of water.
very nice
I use 3 percent at a rate of 1 to 4 haven't seen an issue why us a high percentage peroxide?
I’ve used that ratio as well but it seemed good for only one or two batches. The higher percentage last longer.
@@indiantrailoutdoors thanks
Definitely whitebone creation technique!
Nice work! What do you charge per skull?
Thank you! I charge $125 for deer.
Thank you for replying! I have been doing skulls with beatles for friends and family. But it is slow. I liked the speed and efficiency of you processes. Great video!
Absolutely! Thank you
NiceJob 👍
Thank you!
Nasal bones came off cause your heat was too high. This is exactly how I do mine too.
How much dawn and baking soda do you use for 4 gallon pot?
I just eyeball it, It’s a fair amount of both, maybe 1/2 a cup of baking soda and 2TBS of soap
Personally I'd never use a power washer, have seen friends break or damage nasal cavities also I would never stand on a skull
Man I would not recommend your method to anybody, your not boiling your skulls long enough or using the right ingredients, I never have to take a drill or long needle nose scissors for the nasal cavity, I use a sink and a pick and it comes out just fine
That works too
Bro try using flat white spray paint for whitening . Works great and looks natural
Don't ever paint a skull white just put in the work to get it white only use paint if it's a paint hydro dip. A customer doesn't want a white skull that's been painted white
how long does your peroxide batch last
It depends quite a bit, sometimes a few weeks sometimes the whole season. Depending on how strong it is
I will use a batch of peroxide mix for 20 to 30 skulls before it's time to get a new batch going
So you don’t degrease them?
They degrease in the boiling water with dish soap and baking soda.
Takes longer than that to remove all the grease and I NEVER boil!
Couldn't really see what you were doing after you punched the ear area out. You need two cameras or put your camera in several different locations. Stop and move your camera, then start again if you want to make a really informative video.
I bury mine for two or three months. Then put in bucket with water and bleach. Done. Mine are not nearly as nice looking as yours.
Personally, I don’t like the snow white bleached skulls. Don’t seem to have much character. I just dig mine in the dirt, let the maggots and bacteria take care of the flesh, and then you can boil the skull for a little bit to disinfect it and take small tools to scrape out the cavities. Then I like to smoke it and spray with clear gloss enamel. Good video
Mop and Glo??? If anyone's wife goes to wash the skull in a few years it will wash the Mop and Glo right off, that is the way it's meant to work. Every time you wash the floor it will remove the previous application. Something like a spray wax like any dusting spray would work better.
And lose the music, it just doesn't fit this video son. Otherwise you did a fine job.