S10&S30 Series X+Y Expansion Kit Installation Tutorial | Step By Step Instructions | 900x920mm
ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2024
- In this video, I will show you how to install the S10&S30 Series X+Y Expansion Kit. It is a Step By Step Instructions. Easy-to-follow tutorial!
(Please open the video subtitles and use automatic translation.)
👉Purchase it on Sitculpfun Official Website: bit.ly/3ZDXd1j👈
⭐️IMPORTANT⭐️
Upgrading requires tweaking motherboard power output intensity (05:08)
When pushing the extension gantry, push it from the middle
When assembling, note that there should be three screw holes on the left inner front side to install the limit switch (11:54)
After adjusting the size of the working range, you need to write $130=900 and $131=920 to the mainboard respectively, otherwise the limit switch may be abnormal (19:29)
If the gantry is not running smoothly, it is necessary to adjust the balance of the eccentric nuts on both sides. If the belt is completely fitted to the edge of the gear, it is recommended to adjust the gear position (13:54)
Early products may lack four M5*12 fixing screws and an S10 adapter board. If necessary, please contact customer service to reissue
In the follow-up package, additionally add the cable holder*12 and the cable tie*10 to organize the cables
🤩Do you want to have a laser engraving machine with an engraving area up to 900x920mm?
Purchase links here👇👇👇 (Only for Sculpfun S10 & S30 Series)
▷SCULPFUN official website:
sculpfun.com/products/sculpfu...
▷Geek buying:
www.geekbuying.com/item/SCULP...
▷Allegro (Poland&European countries):
allegro.pl/oferta/grawer-lase...
=====================
⭐️IMPORTANT REMINDER⭐️
Engraving area after installing the limit switch:
S30: 380x385mm
S30 Pro: 380x385mm
S30 Pro Max: 370x363mm
(The outer dimensions for the S30 Series: 565x515mm)
-----------------------
S30+XY Expansion kit: 900x920mm
S30 Pro+XY Expansion kit: 900x920mm
S30 Pro Max+XY Expansion kit: 890mmx900mm
-----------------------
S30+Y Expansion kit: 380x920mm
S30 Pro+Y Expansion kit: 380x920mm
S30 Pro Max+Y Expansion kit: 370mmx900mm
===========================
What else do you wanna know about the SCULPFUN? Please let us know in the comments！
If you like the video please click "👍".
Subscribe us for more videos ❤️
===========================
👉Facebook： / sculpfunofficial
👉Facebook Official Group：bit.ly/42q5rwO
👉TikTok: bit.ly/3lKPdgZ (@sculpfunreal)
👉Official Website: bit.ly/3ZDXd1j
👉Instagram： / sculpfunofficial
👉Twitter: / sculpfuntech
======================
SCULPFUN S30 Pro
▷Geek buying: www.geekbuying.com/item/SCULP...
(Coupon code:SCULPFUNS30P)
▷Aliexpress: www.aliexpress.com/item/10050...
▷TOMTOP: www.tomtop.com/p-os6677eu.html
▷Allegro (Poland&European countries): allegro.pl/oferta/12652101846
▷Banggood (Global delivery):
www.banggood.com/SCULPFUN-S30...
▷Alibaba.com (Low batch price & Global Shipping): www.alibaba.com/product-detai...
▷Amazon(US&EU warehouse & fast delivery): amzn.to/3WGUgg9
(7%off code :07X27EMV）
▷NewEgg (US): www.newegg.com/Product/Produc...
▷SCULPFUN official website:
sculpfun.com/collections/scul...
▷Amazon (US): amz.run/66d7
▷Amazon (US): amz.run/66dC
===========
Other videos in our channel you might be interested in:
👉One Minute Teaching! How to Remove and Replace Lenses on The S10 & S9 Laser Engraver
• One Minute Teaching! H...
👉How to Remove and Replace Lenses on The S30 Series | Installation Tutorial | S30 Series | 20W
• How to Remove and Repl...
👉SCULPFUN S30 Series Instructions for First Use & New Function Tutorial | 20W | Installation Tutorial
• SCULPFUN S30 Series In...
👉Three things you should know about air assist（For SCULPFUN S10）| Air Assist | 10w:
• Three things you shoul...
👉Six Amazing Projects Using SCULPFUN S9 Laser, happy laser making at home:
• Six Amazing Projects U...
👉SCULPFUN S10 laser engraving machine Unpacking & Assembly Instruction:
• SCULPFUN S10 laser eng...
#installation
#lasercutter
#laserengraver
#laserengraving
#sculpfun
#sculpfuns30
#sculpfuns10
---------------------------
00:00 Unboxing
01:44 Step 1 Dismantle Laser carving machine
04:08 Step 2 Adjust the motherboard
05:45 Step 3 Assembled Gantry
11:29 Step 4 Re-assemble the carving machine
14:06 Step 4-3 Install accessories and connect the cable
19:07 Settings for the initial use - วิทยาศาสตร์และเทคโนโลยี
i love this!
😘
Too bad we have to use many parts of the standard frame. I would prefer to keep the standard frame complete and only move the laser head itself, or buy a second laser head, so I can use both setups.
If I buy this 900x920 expansion kit, can I use just the Y axle expansions from it, to be able to make it 400x920 size and have the X axle expansion for spares if I need to cut bigger? Or building the 400x920 version is just possible with the Y expansion kit?
when using the rollerthing do i unplug both y axis motors and do i have to screw back the little screw on the pcb ?
30 Pro Max I am installing the expansion kit and found I do not have a screw to increase motor power. I see I have jumper pins. What to do?
Mi cable original de la s30 ultra trae 6 conectores 3 rojos y 3 azules y uno negro el cable de el kit de expansión solo trae 4 😥😥😥😥necesito ayuda de como conectarla
Quero comprar uma ja com o kit de extensao 9nde comprar
I just received my s30 pro max and i haven’t put it together yet because I went ahead and ordered the expansion kit (905mm x 915mm). I did it this way because I figured at least this way I wouldn’t have to take it apart to add extension kit. My question-will I be ok just going off the normal directions or will it be different since I’m setting it all up together initially?
Sorry it is difficult for us to judge the cause of the problem from your description.
1. You can join the sculpfun fb group and post a detailed description & pictures of the problem:
bit.ly/42q5rwO
2. Or communicate with our after-sales staff by email:
support@sculpfun.com
Thank you!
Is there no settings to tell GRBL that you now have two Y axis motors??? I didn’t see any mention of setting this up
I'm having the same problem, did you solve it?
Do you have a X-axis switch extension cable? I'm using the Y-axis extension kit.
Not selling alone for the time being, you can find the extension line of the same port on Amazon or local malls.
Hello, i have buy the expansion kit with my S30 Pro Max and there was the plastic hose inside, how can i get the rubber hose, because the hose keeps kinking, bought on 4/7/2023 at Geekbuying. Greets
I have an S30 pro max laser engraver, I bought a 900x920mm expansion for it.
I put it together based on the video and the error is that the y axis starts jumping after a while.
adjust the wheels of you carriage
Me pasa lo mismo, aún no he solucionado
I put mine together just like the video shows, now when I try to cut or engrave a bigger or complex item it will cut two lines but not on the same line. It skips and cuts into a line it has already cut. What can I do to fix this problem? I did not have this problem with the smaller regular size S30 pro set up.
might be an issue with belt tension or the table is uneven
@@elijahdungan3612 Thank you for advice, I will consider those factors when I decide to put it back together.
Die Probleme habe ich auch wenn ich mit weniger 700mm/m arbeite.
AB etwa 700mm/m aufwärts ist alles gut was fürs schneide zu schnell ist um in einem Durchgang durchs Material zu kommen.
Hab es selbst versucht das Problem mit einer Welle zwischen den beiden Y Antrieben zu lösen nur besteht das Problem weiterhin.
Bin sehr enttäuscht über die X Achserweiterung ohne die ist alles super. Schade um das Geld.
Exactement le même problème !!!!!!!!!!!
Does this extender fit the sculpfun s9?
Sorry no
Does this fit the S30 Ultra?
Sorry no.
I didn't get an upgraded hose. It's the same low quality plastic as the original.
it's an old package. Same happend to me.
@@michaelkohler3584 I emailed them and they sent a replacement!
@@NeverEnoughShowbuy you by geekbuying, how is the email. Greets
When you put the power harder , do you need to need to turn both screws 90° ore just one?
What do you mean? Laser head screw? Both should be tightened. If not, please attach the video time
Have the same question, they mentioned em in plural, I'm scared jajaajajaja jajaja. Please tell me your results.
@@lizettefernandez7858 5:08? Sorry! Poor English. Just turn the first screw on the left.
5:08? Sorry! Poor English. Just turn the first screw on the left.
@@user-hl9pi6lu1nThank you, I noticed the plural as well and was a bit paranoid. thanks for the answer- this should be a pinned comment/answer!
Hello. does it work for s9 model?
Sorry no.
My sculpfun didnt come with a laser
Yo lo adquirí tengo un láser s30 pro Max
En primer lugar no me gustó se tenga que desarmar el marco donde va el láser, el segundo eje que se le agrega esta muy tenso si lo aflojo tantito o las bandas se hace todo es un descontrol, de cuando mandaba hacer algo.
Tampoco me gusto que no viniera el fierro que sostenía a ambos ejes, porque al momento de hacer algo no se alienan por más que los acomodes.
puse las medidas del video y el láser siempre se detenía en algún punto y no trabajaba, cuando la iniciaba también se detenía y no llega al inicio me decía error por no llegar al tope.
Y resulta que ahora mi láser NO hace nada, los programas detectan a mi láser pero no se mueve en lo absoluto ya llame un técnico y nada le encontró nada.
No se qué más hacer, alguien sabe qué hacer?
O alguien más le paso lo mismo que a mi?
Is there anyone here who has assembled the 935x900 and has had success? I've had limited success on small jobs, but anytime I stretch the laser area, it fails miserably. The component that slides left/right on the carriage beam seems really tight...way more than the original carriage beam.
J’ai exactement le même problème : des décalages avec l’extension !!!!
You have to turn the screw on the motherboard to increase the volts
😔 It worked for me and then it stopped working
Me llego el motor con giro invertido, es un problema
aun tienes ese problema ? yo lo pude resolver :D
@@ausurero como lo resolviste cuando pongo mi máquina que vaya ala derecha se va ala izquierda
I've had nothing but problems since i upgraded to a larger work area😡
Leider überzeugt die Funktion der Erweiterung nicht wirklich
Bei Geschwindigkeiten unter 700mm/m gibt es zu großen Ungenauigkeiten der X Achse.
Bin sehr enttäuscht über die Anschaffung hätte ich das gewußt hätte auch ich mir nur die Erweiterung der Y Achse gekauft.
If the X-axis is too different, it may not be adjusted properly. If the Y-axis jumps, it is basically the asymmetrical position of the engraving at the beginning.
If you need more help, send email to: support@sculpfun.com
GROS PROBLÈME DE DÉCALAGE AVEC CE KIT D’EXTENSION !!! AUCUNE SOLUTION N’A ÉTÉ TROUVÉE…😢😢😢