Looks good. As far as the front bumper section. That front splitter on the bumper is the wrong one. That's the hellcat front splitter. You want the widebody (demon) splitter. It's wider than the hellcat one and the front light piece will slide right in it. Another way you can visually distinguish it, is it's straight all the way across. I have the vicrez Demon splitter. I have a video of it on my channel
The fact that you can do this to the old models it’s a steal I got 2010 and I’m doing the same shit.. good job this guy is like me I see every detail. And yea those markers go out every now and then
That challenger looks exactly like a hellcat wide body, it looks the part and it will soon act the part after you put a hellcat supercharger on the 5.7 or turn it to a scat pack wide body after modding the entire engine with heads, cam, valves and etc. putting a tune on it will the seal the deal.
Now ive heard it a few different ways , If im swapping my R/T to widebody i heard you need to add another 5mm spacer so it clears the Spindle if the car did not come with Brembo brakes And i also heard you need to cut out part of the quarter panel for the rears beacsue theres not enough clearance for the tires and hitting a bump i will completely mess up my panels and my widebody kit. Can't seem to get a clear cut answer on what i need for these.
I rode on the wheels months before installing the kit and had no scrubbing in the rear. When you first put the wheel on it touches but once you lower back the the ground off the jack there’s no scrubbing. I only added spacers with the kit. The only part you would cut would be the front fenders that may scrub when you hit a big speed bump with the widebody wheels/tires(worst with scats/hellcats because they sit lower). In my experience, that’s the only time it scrubbed and it was so little I didn’t cut anything. I’ve done burnouts, donuts and etc without damaging anything. The guy who bought it is still riding with no issues.
@russellmuscleatl Thank you! I forgot to mention I'm doing a Challenger, not a Charger. Hopefully that doesn't change your answer. If not I feel a lot better about doing this now!
Preciate it and that’s what up. It rides the same and I’ve done donuts with no issues. I didn’t have any scrubbing issues. If you’re installing on a scat or cat you’ll have to cut the fenders cause they sit lower.
sweet video good job man. did you have to cut the fenders at all? ive heard the tires sticking out can rub the top of the fender? did you have to cut or did you have any issues rubbing the fenders with the tires sticking out?
Thanks bro 🤝 I never had any scrubbing issues. The hellcats and scats sit lower so you’ll definitely have to cut with those. Thats one of the reasons I’m not putting the kit on my hellcat.
The factory should have tubbed them out a bit. Most of the inner fender is plastic. They'd have to reposition the shock a bit, but it would look better than the bushwacker treatment in my opinion.
Broooo I got a 2011 rt with the new lights back and front but I still have the old bumper cus I couldn’t find a way to get a newer one on there and you have the best bumper with the bottom Grilles I’m definitely gona have to be replacing my whole front end now if you see this where did you get it from
@@russellmuscleatl she’s a beauty bro ima for sure get that after I put some more money in the engine just bought lights and the wicker bill tbh I thought I was just gona have to do custom work but ur car is basically all new so I know I can do it y’all stay safe bro
I did the same thing on my 2017 Scat Pack. Spacers and all. Let me ask, do your tires rub when you hit any bumps on the rood? Also, when I make turns into driveways, a weird sound comes from the rear area. Sounds like something sliding... When I take spacers off, everything sounds fine and no rubbing.
That’s what’s up bro.. I didn’t have a issue with rubbing but I notice the scats and hellcats sit lower than the rts. Did you cut the fender? I thought about putting the kit on my hellcat but don’t want to cut it
@@russellmuscleatl No did not cut the fender, which made the top of the flare keep pulling loose. Took a couple of gluing to finally make it stay. Did have to cut the front marker piece to make it fit on the splitter. What size is your spacers?
Hey I had a question about those marker lights. I've been looking at getting this kit with the bumper and fender flares for my 2012 rt and I am trying to figure out everything that would need slight modification since I have a challenger model previous to 2015. How did you get your marker lights plugged in and working? Is there some sort of adapter for 2008-2014 that can connect to 2015+? Just let me know how you got it to work. Thanks and looks great btw.
What’s up Alex, I haven’t got the front ones hooked up yet. Tbh I really haven’t looked into it yet but I would reach out to vicrez to see what they recommend. Like you said, I would think there’s a adapter for them. Or you may have to spice into the wires from the car with the newer plugs. Anytime and thanks🤝🏁
is it healthy to put spacer on wheels for a high torque muscle car? because instead of wheels, those spacers would have to carry all the weight, right?
Good evening, hope you’re enjoying it! I didn’t have to cut the fenders in my rt but I think the hellcats and scat packs sit lower so you would have to cut those. I never had a issue with scrubbing. I used 2 inch titan hubcentric spacers
@@haydenwinters9717 I found this on google but you may be able to find a better price with a little more research findpigtails.com/connector/dodge/challenger/2016/side-marker/
It’s not the bumper I need a demon front lip to line up with the flares. I like it though.. The look definitely worth the price compared to buying a widebody in this market
@@russellmuscleatlso you didn’t have to cut nothing? And did you use spacers? I’m trying to put widebody kit on my rt with widebody rims and tires!! Just need some advice
I just got my 3rd kit today they finally fixed that front issue that’s been the main issue with the kit other wise it’s perfect I have zero complaints hints why all 3 of my dodges have the widebody kit
That’s what up! Ima check them out when I get home. My only issue is I ordered the demon bumper last year and just got the fender flares. I figured since it said demon bumper it would come with the demon lip but came with a hellcats. Other than that everything is great to be aftermarket
I’m not sure, I had the bumper before I got the flares. I know you’ll need the demon splitter to attach to the flares in front of the wheels to cover a gap and I believe that only fit on the srt bumpers. I never got the splitter and no one ever noticed the gap.
One of my flare came off do the stick on the bottom side skirt dodge on the front wheel whale do they sell one pieces or you have to buy the whole kit again
Hate to hear that bro. All I’ve been seeing is the whole kit but you may find parts on ebay/Amazon. Or reach out to one of the manufacturers directly. I don’t see why they wouldn’t have parts separate for this reason.
Nice job bro 🔥🔥🔥 got a question though regarding the kit… I’m from Russia and ordered a reg body scat pack in hellraisin color from the US, I’m expecting it to arrive somewhere around September, so until that I’m having this dilemma on to get or not to get that widebody kit. Everything I’ve found is priced about $5000, those claim to be original and also require you to make the holes on the sides around the wheel arches to mount it, which I don’t really wanna do… and recently I’ve found the one on a Chinese site for 700 bucks but it comes with the 3m tape like yours. So my questions is how reliable is it with the 3m tape? As I think it might easily fall off due to the wind if you drive let’s say not too slow, or maybe fall off after some time due to rain, snow etc? This vid is 2 months old, how’s your kit doing so far? And the gaps, are they too noticeable and do you think it can be done better so there’s no gaps at all, or no matter hard you try there still be gaps? And then the spacers: will it work with 30mm spacers and 275 tires on stock rims? Thanks in advance 💪
Thanks bro and congrats on the new scat! After I install mine I found some kits on eBay for around $400. Looks like the same exact kit I have. I wouldn’t trust the 3m tape. The one that came with mine didn’t really stick at all. So far the 3m glue and black silicone is working good. I think if you could use something better than the j b weld I used on the flares to give the glue more of a solid flat surface to stick to you’ll be good. My issue was the j b weld started breaking off. I think you’ll need 2 inch spacers to line up perfect with the kit but I went with 1.5 inches and they look good. You’re welcome 🤝🏁
Also once you glue them the gaps wont be noticeable. I did a video with my bro who had a oem widebody hellcat. The gaps looked the same other than the flares I had to re glue
@@russellmuscleatl ok brother, thanks for the reply, I’ll keep it in mind. The widebody look is just sick on this car and changes the whole thing, so I’ll probably get it as well. Also I’m thinking of getting the hellcat front bumper as it’s much meaner than the scat. And one more question: do you have 275 tires as well or yours are wider?
@@russellmuscleatl Where did you buy the kit from? And did ya have em paint matched yourself? I'm fixin to cop a 10' SRT8 and get the widebody goin Shit that color makin me jealous af tho
Looks good. As far as the front bumper section. That front splitter on the bumper is the wrong one. That's the hellcat front splitter. You want the widebody (demon) splitter. It's wider than the hellcat one and the front light piece will slide right in it. Another way you can visually distinguish it, is it's straight all the way across. I have the vicrez Demon splitter. I have a video of it on my channel
Thanks bro and that’s what I figured. I’ll call them again tomorrow and get it worked out 🤝🏁
The fact that you can do this to the old models it’s a steal I got 2010 and I’m doing the same shit.. good job this guy is like me I see every detail.
And yea those markers go out every now and then
Yeah it’s crazy bro. Saved on rebuilding vs buying a new model. About to put that money toward real estate and another car
@@russellmuscleatlhi bro, I’m thinking about doing the same to mine. Didn’t notice if you had to cut into your fenders? Please let me know if you did.
Great job with the video process, and carefully explaining your process. Thank you, and keep up the Good Work !
Thanks Randall! You’re welcomed and will do 🤝🏁
Chief you got balls for even attempting this.
Good video too.
Lol Preciate it Jay 🤜🏾🤛🏾
Mane that shid look good as hell!!! Thanks for the tutorial. I’m def bout to do this to mine. 💯
Preciate it bro 🤜🏾🤛🏾 I recommend putting the kit on before you get a paint job if you plan on getting one. That way you can put a lot of glue on it.
Good job . Well explained
Thanks 🤝🏁
salute to you for taking the time out going through your process, looks good im about to throw this kit on my scatt
@@BIGPENNProduction Preciate you watching🫡 That’s what’s up, only difference is you may have to cut the front fenders.
@@russellmuscleatl my man I appreciate you I’ll definitely look into it
First!!! Great job fammm🙏🏽🔥🔥 that baby 1 of 1 clean, different and special. Great work famm frfr handled that easy simple and perfectly
🙌🏾 Preciate it bro and the info💯 meant to shout you out in the vid🤜🏾🤛🏾 You made it look easy! Keep killing it fam 📈
It looks good , I've got a 13 and I'm going to order mine now , u did a good job
That’s what’s up! Preciate it bro🤝🏁 hope it turn out perfect
I plan to do the same! Let me know how it goes please!
Cool@derrickphilon2767 but what color is your 2013 Dodge Challenger.
Yo u did a good job looking A1👍🏾
Preciate it James 🤜🏾🤛🏾
That challenger looks exactly like a hellcat wide body, it looks the part and it will soon act the part after you put a hellcat supercharger on the 5.7 or turn it to a scat pack wide body after modding the entire engine with heads, cam, valves and etc. putting a tune on it will the seal the deal.
Preciate it 🤝 That was the plan but I sold it and bought a hellcat.
Looks good planning on doing this to my 2013 scat
Preciate it and that’s what’s up 🫡🏁
Get some srt seats, a touchscreen and a steering wheel and its gold.
when you say steering wheel, what kind of steering wheel do you recommend?
@@toxiicmayhemzz6686bro tfyt? srt duh😂
@@toxiicmayhemzz6686Probably a carbon fiber.
MAN WHAT?!? That’s hard 💪🏽 lI’m finna follow the blueprint
🙌🏾 Preciate it bro!! Keep me posted 🤜🏾🤛🏾
Solid job brother your a pro !
🙌🏾 Thanks fam! 🤜🏾🤛🏾
Maestro te quedo bien esta otro nivel tu carro saludos desde san Francisco California
Thanks Manyi! Sorry for the late response 🤝🏁
Now ive heard it a few different ways , If im swapping my R/T to widebody i heard you need to add another 5mm spacer so it clears the Spindle if the car did not come with Brembo brakes
And i also heard you need to cut out part of the quarter panel for the rears beacsue theres not enough clearance for the tires and hitting a bump i will completely mess up my panels and my widebody kit. Can't seem to get a clear cut answer on what i need for these.
I rode on the wheels months before installing the kit and had no scrubbing in the rear. When you first put the wheel on it touches but once you lower back the the ground off the jack there’s no scrubbing. I only added spacers with the kit. The only part you would cut would be the front fenders that may scrub when you hit a big speed bump with the widebody wheels/tires(worst with scats/hellcats because they sit lower). In my experience, that’s the only time it scrubbed and it was so little I didn’t cut anything. I’ve done burnouts, donuts and etc without damaging anything. The guy who bought it is still riding with no issues.
@russellmuscleatl Thank you! I forgot to mention I'm doing a Challenger, not a Charger. Hopefully that doesn't change your answer. If not I feel a lot better about doing this now!
dam u even got the hood this shi go hard 🔥
Preciate it bro 💯🤝🏁
It might just be me but a nice set of brembo breaks would make that car sickkk
Nawl you right🔥.. Should be paid off this year and I’ll probably look into it. Preciate the feedback
Ay bro dope build i wanna widebody my challenger i was wondering how does it ride with the spacers? and do your tires rub?
Preciate it and that’s what up. It rides the same and I’ve done donuts with no issues. I didn’t have any scrubbing issues. If you’re installing on a scat or cat you’ll have to cut the fenders cause they sit lower.
Looks awesome brother, what size wheel spacer did you use in? Are they 15mm?
Preciate it bro🤝🏾 I used 1.5” but the link to them in the description.
sweet video good job man. did you have to cut the fenders at all? ive heard the tires sticking out can rub the top of the fender? did you have to cut or did you have any issues rubbing the fenders with the tires sticking out?
Thanks bro 🤝 I never had any scrubbing issues. The hellcats and scats sit lower so you’ll definitely have to cut with those. Thats one of the reasons I’m not putting the kit on my hellcat.
That’s fire! Great video!
Preciate it bro!!
How’s the kit holding up after having it for a while , have you driven over 130?
@@krispykeyog I sold it 2 years ago but got a picture from the owner and it’s still holding up.
looks kick ass. Not sure I could put self tapping holes in my scat pack ..
Preciate it! I have a hellcat now and I can’t do it either lol
The factory should have tubbed them out a bit.
Most of the inner fender is plastic.
They'd have to reposition the shock a bit, but it would look better than the bushwacker treatment in my opinion.
I agree.. Would have looked a lot better.
Broooo I got a 2011 rt with the new lights back and front but I still have the old bumper cus I couldn’t find a way to get a newer one on there and you have the best bumper with the bottom Grilles I’m definitely gona have to be replacing my whole front end now if you see this where did you get it from
What’s up bro, you can get it from Vicrez. I have a link to the site in the description 🤝🏁
@@russellmuscleatl she’s a beauty bro ima for sure get that after I put some more money in the engine just bought lights and the wicker bill tbh I thought I was just gona have to do custom work but ur car is basically all new so I know I can do it y’all stay safe bro
I appreciate it bro! You can definitely do it one mod at a time. It’s videos for everything I did to it. Stay safe out here also bro 🙏🏾
Good content homie. Suprise you dont have more subscribers .
Preciate it bro! It’s growing slowly 🤝🏁
I did the same thing on my 2017 Scat Pack. Spacers and all. Let me ask, do your tires rub when you hit any bumps on the rood? Also, when I make turns into driveways, a weird sound comes from the rear area. Sounds like something sliding... When I take spacers off, everything sounds fine and no rubbing.
That’s what’s up bro.. I didn’t have a issue with rubbing but I notice the scats and hellcats sit lower than the rts. Did you cut the fender? I thought about putting the kit on my hellcat but don’t want to cut it
@@russellmuscleatl No did not cut the fender, which made the top of the flare keep pulling loose. Took a couple of gluing to finally make it stay. Did have to cut the front marker piece to make it fit on the splitter. What size is your spacers?
Ok cool, they are 1.5”
You sound like Shaquille O’Neal😅 Great video!💪🏽
@@x4tfxChallenger 😂 Preciate it💪🏾🏁
@@russellmuscleatl No problem 💪🏽
I have a 19 RT. I’m thinking about doing this. Any ballpark on what the cost to paint would be?
That’s what’s up.. Every shop different but I paid $1800 for two tone with a 3 year warranty.
You did a great job on wide body. Did you put glue tape? And heat it up. That way it could line up.
Thanks🤝 I used 3m glue. It’s lined up perfect
Can you use the stock headlights or do you have to upgrade to the newer ones
I saw someone use the stock ones but they had to shave a lot off the bezel that goes over them.
@@russellmuscleatl how did it look
don't loose that 10mm socket 😂, nice job .. love the color 👌🏽
lol Thanks 🤝🏁
10/10 for me. Keep it up 👍🏾
Preciate it bro💯 Will do🤜🏾🤛🏾
Mane you be putting that work in lol. Good shxt fam. 👏
I try to when I get time lol Preciate it fam
🤜🏾🤛🏾💯
Hey I had a question about those marker lights. I've been looking at getting this kit with the bumper and fender flares for my 2012 rt and I am trying to figure out everything that would need slight modification since I have a challenger model previous to 2015. How did you get your marker lights plugged in and working? Is there some sort of adapter for 2008-2014 that can connect to 2015+? Just let me know how you got it to work. Thanks and looks great btw.
What’s up Alex, I haven’t got the front ones hooked up yet. Tbh I really haven’t looked into it yet but I would reach out to vicrez to see what they recommend. Like you said, I would think there’s a adapter for them. Or you may have to spice into the wires from the car with the newer plugs. Anytime and thanks🤝🏁
how did u change the headlights to smaller ones
@@sstevenn th-cam.com/video/crVBOfo2zI4/w-d-xo.htmlsi=H8VvB1DHLZN8vgMs
Got a question bro', do you have any kind of issues with the Titan's spacers you've installed (Vibrations, axle bearing...)?
What’s up bro! I didn’t have any issues nor the guy who bought the car.
@@russellmuscleatl thx bro' and last question: do you remember the screawing torque for them?
@@BlackDemon1981 No problem and I don’t remember.
is it healthy to put spacer on wheels for a high torque muscle car? because instead of wheels, those spacers would have to carry all the weight, right?
It’s best to get hub centric spacers so all the weight isn’t on the studs. The brand I used is one of the best.
Hallo, komme aus Germany und ich habe auch einen Dodge Challenger... Muss man am Kotflügel was schneiden für den wideboddy Umbau? Gruß Freddy
Good evening, hope you’re enjoying it! I didn’t have to cut the fenders in my rt but I think the hellcats and scat packs sit lower so you would have to cut those. I never had a issue with scrubbing. I used 2 inch titan hubcentric spacers
@@russellmuscleatl vielen lieben Dank! American Muskel never die 🇺🇸 great car 👍🏼
The 2 sidetape won't hold. My friend has bought 3 kits due to parts coming off.
Yeah I figured so I used the 3m glue. They should have made the flares with a 1 inch flat surface on the inside so they could have more space to grip.
Can you buy the wider wheels so you don’t have to use adapters or it doesn’t matter ?
@@kingjay_117 I had some voxx hellcat widebody reps that fit perfect with no adapters.
@@russellmuscleatl thanks bro 😎
@@kingjay_117 Anytime 🤝🏾
What side marker lights did you use? My 2011 is different hookups from what was given
You’ll probably have to get the newer plugs and splice them to the car wires. I haven’t seen a adapter for them.
@@russellmuscleatl where you get the newer plugs? I’m have a hard time finding them
@@haydenwinters9717 I found this on google but you may be able to find a better price with a little more research findpigtails.com/connector/dodge/challenger/2016/side-marker/
@@haydenwinters9717 I would go to a junk yard. I’m sure you can get both there off a wrecked one.
The wide body kit makes the challenger look mean.
Thanks bro🤝🏁
You need a hellcat bumper, also after driving around how do you like it?
It’s not the bumper I need a demon front lip to line up with the flares. I like it though.. The look definitely worth the price compared to buying a widebody in this market
Where did you get the glue and glue gun ?
The link in the description
Did you have to put wheel spacers on to match up with the fenders?
Yessir, I showed them in the video.
What rims demission is it and do you use spacer ?
@@MusicHub-y4j 20x11 rear 20x9.5 front and I showed the spacers in the video. The link in the description
Looks good
Thanks 🤝🏁
Did you get widebody rims and tires or just spacers?
Wheels were 20x11 with 315s in the rear
@@russellmuscleatlso you didn’t have to cut nothing? And did you use spacers? I’m trying to put widebody kit on my rt with widebody rims and tires!! Just need some advice
She look good bruh
Preciate it bro🤝🏁
Do they sell it pre painted factory?? Or do you gotta go to a shop to match the paint for it
You have to get it painted
Dope vid🔥 do you know if you can put the el wire led lights in the interior of the 14 n lower?
Preciate it💯 I don’t but was think about doing the same. I’m sure it can be done
@@russellmuscleatl yeah that and the stars in the ceiling would go crazy!
Hows the fitment on the after market bumper with the hood line up ?
The fitment was good.. The hood is from carid(Amerihood).
@@russellmuscleatl thanks looking into doing that bumper with stock hood
Damnn you have to drill it.. I thought you could tape or some kit just stick to the car
Yeah you gotta drill and some people even cut a piece out the fender so the wheels won’t scrub. I didn’t have any issues though.
I just got my 3rd kit today they finally fixed that front issue that’s been the main issue with the kit other wise it’s perfect I have zero complaints hints why all 3 of my dodges have the widebody kit
That’s what up! Ima check them out when I get home. My only issue is I ordered the demon bumper last year and just got the fender flares. I figured since it said demon bumper it would come with the demon lip but came with a hellcats. Other than that everything is great to be aftermarket
@@russellmuscleatl yes u need the widebody lip and the oem front parts for it to fit perfectly
@@jesussavescars807 Preciate the info!
Cual es la medida de los neumáticos es que estoy haciendo lo mismo estoy comprando unos rin de 20” x 9.5 y 20 x 11
315s are wider tires for better performance. More rubber meets the road
Clean AF 🔥🔥
Preciate it Dave💯🤜🏾🤛🏾
🔥🔥🔥
🤜🏾🤛🏾💯
Do you have to have the srt bumper
I’m not sure, I had the bumper before I got the flares. I know you’ll need the demon splitter to attach to the flares in front of the wheels to cover a gap and I believe that only fit on the srt bumpers. I never got the splitter and no one ever noticed the gap.
Thanks bro
@@UnfamousRT Anytime
How’s the glued flares holding up
Sold the car but it’s still holding up. I did have to reglue some areas as stated in the video.
is getting spacers better than buying wider wheels?
A wilder wheel is always better but mine were already 20x11s. Spacers are cool just make sure they are hubcentric.
@@russellmuscleatl thanks for the help
@@Dark-st2hx anytime
What wheel set up do you have? Staggered? What exact specs?
Front 20x9.5 rear 20x11
@@russellmuscleatl Did the front need bigger spacers than the back? Or how did you set that up?
One of my flare came off do the stick on the bottom side skirt dodge on the front wheel whale do they sell one pieces or you have to buy the whole kit again
Hate to hear that bro. All I’ve been seeing is the whole kit but you may find parts on ebay/Amazon. Or reach out to one of the manufacturers directly. I don’t see why they wouldn’t have parts separate for this reason.
Where you order the spacers from!
Nvm I see them but should I get 1.5 or 2 inches? For my spacers
Either will work but I think 2 inch look a little better
@@russellmuscleatl your running 1.5?
how did you paint match your kit?
I took it to the same shop and they used the same color code from when they painted the car
Nice job bro 🔥🔥🔥 got a question though regarding the kit… I’m from Russia and ordered a reg body scat pack in hellraisin color from the US, I’m expecting it to arrive somewhere around September, so until that I’m having this dilemma on to get or not to get that widebody kit. Everything I’ve found is priced about $5000, those claim to be original and also require you to make the holes on the sides around the wheel arches to mount it, which I don’t really wanna do… and recently I’ve found the one on a Chinese site for 700 bucks but it comes with the 3m tape like yours. So my questions is how reliable is it with the 3m tape? As I think it might easily fall off due to the wind if you drive let’s say not too slow, or maybe fall off after some time due to rain, snow etc? This vid is 2 months old, how’s your kit doing so far? And the gaps, are they too noticeable and do you think it can be done better so there’s no gaps at all, or no matter hard you try there still be gaps? And then the spacers: will it work with 30mm spacers and 275 tires on stock rims? Thanks in advance 💪
Thanks bro and congrats on the new scat! After I install mine I found some kits on eBay for around $400. Looks like the same exact kit I have. I wouldn’t trust the 3m tape. The one that came with mine didn’t really stick at all. So far the 3m glue and black silicone is working good. I think if you could use something better than the j b weld I used on the flares to give the glue more of a solid flat surface to stick to you’ll be good. My issue was the j b weld started breaking off. I think you’ll need 2 inch spacers to line up perfect with the kit but I went with 1.5 inches and they look good. You’re welcome 🤝🏁
Also once you glue them the gaps wont be noticeable. I did a video with my bro who had a oem widebody hellcat. The gaps looked the same other than the flares I had to re glue
@@russellmuscleatl ok brother, thanks for the reply, I’ll keep it in mind. The widebody look is just sick on this car and changes the whole thing, so I’ll probably get it as well. Also I’m thinking of getting the hellcat front bumper as it’s much meaner than the scat. And one more question: do you have 275 tires as well or yours are wider?
Can u link me to the Chinese one
Did you cut the fender?
@@1fastscat954 I didn’t cut anything. It barely rubbed and that was only over speed bumps
@@russellmuscleatl thanks for the reply. Doing my install myself as well
@@1fastscat954 no problem and that’s what’s up 💪🏾
Did you have to change the bumper or is that the RT bumper?
I got the demon bumper from them before I put the kit on.
Where do u get the wheel spacing kit?
Everything is in the description
Was the front also 315?
Just the rear
@@russellmuscleatlbet . What was on the front ?
@@exclamationcuts 285 35/r20
@@russellmuscleatlPreciate the response 🫡
@@exclamationcuts Anytime 🤜🏾🤛🏾
🔥🔥
🤝🏁
how big are the spacers on your wheels and what are the dimensions of the discs please?
All the info is in the description and video
Sure looks good.....👍
Thanks! 🤝🏁
Where did you get them spacers at?
Amazon, just put the link in the description.
Thanks man! Any rubbing in the front?
@@mcguzman5398 Anytime! No rubbing at all
Where can I buy this kit bro
The link in the description
Did you cut anything?
Didn’t have to.. I think only the scats and up have to because they sit lower
Tus llantas actualmente que ancho tienen ?
Front wheels 20x9.5 rear are 20x11 on 315 tires. Also used 1.5 inch spacers
What size tire and spacer did you use in this video
20x11 on 315s and 1.5 spacers
You should try change the dash panel
Preciate the feedback bro💯 I’m cool with the one I have
Is this an aftermarket kit?
Yes
Not cutting?
No cutting or scrubbing
I love this look but I don’t want to be roasted for wide bodying my V6😂
Preciate it💯 😂 I feel you on that
Do what you want to YOUR car. No shame in owning a V6. Just whatever you do, don’t up badge it
What kit was used?
Vicrez
Shiiiittttt I’m ready to send you mines boi 💪🏾💪🏾💪🏾😅
😂 Preciate it bruh🤜🏾🤛🏾💪🏾✊🏾
Bro ts looks stock, keep it up. 💯👏🏾
Thanks bro💯 Will do🤜🏾🤛🏾
They're calling it a wide body but it's really just fender flares!🤷
I hear you but it’s all about marketing. Widebody sounds better than fender flare hellcat lol
bud this shit is HARD
Preciate it💯🤜🏾🤛🏾
@@russellmuscleatl Where did you buy the kit from? And did ya have em paint matched yourself?
I'm fixin to cop a 10' SRT8 and get the widebody goin
Shit that color makin me jealous af tho
You couldn’t get a scat at least to do it on
th-cam.com/video/1hSgDyUN7FU/w-d-xo.html
He gonna be mad cause that shit gonna be falling off his car in about 2 years 😂😂😂
Nawl, if that happen I’ll just fix it but I sold the car so…
You talk like Shaq
Lol
What spacer size did you use ??
I said it in the video and the link is in the description
What inch wheel spacer did you use, I think you said it I just couldn’t hear it?
👌 1.5
@@russellmuscleatl Thanks bro, and what size tires were you running, thanks for the quick response‼️
@@HoodieSwish Anytime and 315s
What size wheels and tires are you running ?
20x11 on 315s rear 305 front