No race intended .. all love ..went to a mostly blk HS but my woodshop teacher was not blk ..dont matter i just want to thank him for teaching me these skills he was hard on u too.and loved working with wood .. it helped me over the years..in army and all that.. I love you woodshop teacher....Mr.Wiggle...ya that last name says alot❤... We need to keep these skills relevent...high schools bring back home economics...woodshop...and auto mechanics please...very needed❤❤❤
So was there a MRS WIGGLES? That is a certain kind of love there to change your last name to WIGGLES 😮! AND yes shop class was amazing! We even had a small gas engine class,an home electrical..
Чи не легше зробити кондуктор з роздвижними щоками по довжині і ширині в якому рухається фрезер, ніж витрачати час кожного разу на установку брусів при явно однакових пазах!? Нераціональне використання таких великих ресурсів!!!
🤣👍 If you quickly blow them off after you use them then they stay clean and everyone week or two I quickly go spring the shop and blow everything off. Maybe takes 5 minutes Clean things are easy to keep clean. 👍
if you scroll back in my vids you’ll see times I only use hand tools. Layout and prep is all the same no matter how you do it. Machines are just faster at removing material. Truthfully I would rather use machines same way you’re using a smart phone and satellites in space to make the comment instead of hand writing a letter and sending in the mail
How do I stop these from coming to me. I didn’t subscribe and quite frankly I want to see wood working skills and tips not another advertisement for tools. That’s all this stuff is. If I had all of these tools at my disposal I’d actually make something cool not just show off a clamp on mortising machine. Big F’ing deal. Why don’t you show some woodworking SKILLS.
That was such a cool camera angle when it was underneath
Thanks
Man I’d kill for your collection of Festool gear. Nice work, dude.
😁👏🙌
I’d love to have a million dollar workshop, everyday must be like Christmas for this guy.
It relaxing to see this woodworking:-). The smile on his face.
Finally! somebody normal on TH-cam !
😁🙌
You are amazing at your work, following you from the Sultanate of Oman
Thank you so much!
You make it look so easy
Thanks!
That thing is HUGE! Awesome dust storm in the cyclone! Happy New Year!
Happy new year!
Dude that was some nice video footage this time. Of course the other videos are slick too
Appreciate it!
No race intended .. all love ..went to a mostly blk HS but my woodshop teacher was not blk ..dont matter i just want to thank him for teaching me these skills he was hard on u too.and loved working with wood .. it helped me over the years..in army and all that.. I love you woodshop teacher....Mr.Wiggle...ya that last name says alot❤...
We need to keep these skills relevent...high schools bring back home economics...woodshop...and auto mechanics please...very needed❤❤❤
So was there a MRS WIGGLES?
That is a certain kind of love there to change your last name to WIGGLES 😮!
AND yes shop class was amazing! We even had a small gas engine class,an home electrical..
👍👍
@@dustylumberco
🇺🇸 🤝 🇨🇦
@@troykinnison4575 good stuff brother...yes there was a Mrs. Wiggles.🤣.she was a good Social Studies Teacher...God Bless the Teachers...❤️😁🫡
He is enjoying his work too much
That 8 Kg of smoothness.. never used it but love it anyway lol
You are a Magician with precise tools
👏
I wish they would have sealed the chip separator. They really need some foam weather strip, it loses too much suction on a ct36.
Damn I need a Festool sponsorship
Most interesting man right here right now
👍👏
thank you for sharing your experience
👍👏
That undershot shows the dust collection really well 👌
🙌
Great 🎨 congratulations, precision👌👌👌
Thank you! Cheers!
Super cool camera angles
Thanks!
Si tuvieras tu taller aqui en Republica dominicana te visitará excelente trabajo
🙌
Howdy Dusty.
This is a cool new camera shot from below.
Thanks
Nice and clean
Thanks!
Impressive !
Thanks!
You know it’s bad when 🌽 bots have more comments than real people
They're annoying
@@dustylumberco I try to report them every time I see them. They really ruin the content for everyone.
Pena estas máquinas ser uma fortuna para nós brasileiros.😅
Супер 👍👍👍
Крутая при способа
👍👏
Slick Brother .....
Thanks!
Nicely done
👍👍
I can only say one thing MASTER
🙌
Чи не легше зробити кондуктор з роздвижними щоками по довжині і ширині в якому рухається фрезер, ніж витрачати час кожного разу на установку брусів при явно однакових пазах!? Нераціональне використання таких великих ресурсів!!!
Where are all the minions that clean this guy’s shop like a hospital operating room?
Cale Cod Bill
🤣🤣 It's just me.
Nice. How do you get the jig so perfectly setup?
I've practiced and used it a few times
@@dustylumberco”A few” he says. Such a modest fellow. Lol
Is there anything mechanical keeping you within the lines, or are you just that good? 😅
Stop blocks foward and back and acrylic jig has stops for left and right
Years of practicing routing freehand
В конце ступеньку сделал. Ай-ай-ай😂
👏
My god why have I never seen this technique, it is so obvious.... wtf.😊 I need this bit!!!!!!!
🙌
😱👏👏👍
👏🙌
Sawdust doesn't stand a chance in this guys shop.
🤣👍 If you quickly blow them off after you use them then they stay clean and everyone week or two I quickly go spring the shop and blow everything off. Maybe takes 5 minutes Clean things are easy to keep clean. 👍
Лесно е когато имаш супер машини.
Покажете нещо ръчно направено,тогава ще Ви призная уменията.
if you scroll back in my vids you’ll see times I only use hand tools. Layout and prep is all the same no matter how you do it. Machines are just faster at removing material. Truthfully I would rather use machines same way you’re using a smart phone and satellites in space to make the comment instead of hand writing a letter and sending in the mail
$1,000 router
Not the tool matters, but the Master
So what, that router is worth every penny it’s my go to router and has earned every penny it cost me and more!!
👍
Let's see a Swiss Army Knife hack that.
🤣
🎉
👏
Anyone can be a carpenter with Festool,
Any tools
Festool. That ain't working. That's the way you do it!
👍
С таким инструментом, делать такие приметивные вещи...
đẹp chuẩn ❤❤❤❤❤
Thanks!!
Where can you get that base attachment for the router?
Festool 495246 Plexiglas Template Routing Aid OF-FH amzn.to/3CQPDbr www.festool.com/accessory/495246---of-fh-2200
but do you work for festool by any chance? and enough with these advertising videos. you're tired
I do not work for them.
How do I stop these from coming to me. I didn’t subscribe and quite frankly I want to see wood working skills and tips not another advertisement for tools. That’s all this stuff is. If I had all of these tools at my disposal I’d actually make something cool not just show off a clamp on mortising machine. Big F’ing deal. Why don’t you show some woodworking SKILLS.
I've already seen this acrylic tenon jig on your channel and it's not Festool. Is this a custom jig or I can buy it?
It’s made by Festool. It’s called the OF FH router jig
@dustylumber any idea of how can I buy it from Mexico?
There is a page on the Festool website to locate their International distributors
Де таку приспособу до фрезера купили?
www.festool.com
What is the jig that is attached to the router?
Festool 495246 Plexiglas Template Routing Aid OF-FH amzn.to/3CQPDbr www.festool.com/accessory/495246---of-fh-2200
What's depth of each pass about 10mm?
Just depends on the bit, the wood hardness and the router power. Just enough that it doesn't tax the router and so the router is easy to control
Does festool sell that jig or did you make it?
It's from Festool.
Festool 495246 Plexiglas Template Routing Aid OF-FH amzn.to/3CQPDbr
www.festool.com/accessory/495246---of-fh-2200
@@dustylumberco thanks, really nice but really expensive for home use.
this guy has an OF
🤣
I want to be carpenter
🙌