Thank you so much, the metal spring and wire had come off mine, and I've just managed to put it back together, I was panicking thinking I'd have to buy a new machine.
I almost was going to call a company to fit it up, but the explanation in this video helped me (fitting the inner and outer lips is the key) everything fixed together easily after that. Thanks!
Found it much easier to refit the spring clip by starting at the bottom (with join at the top) - once a third of it is in place, you can "stand up" from the knees to stretch the spring back over the drum. Much easier than trying to pull it down as shown in the vid. Hope this helps, and many thanks for the brilliant video 👍
Great Instructional video, I'm totally hopeless at things like this but, after alot of pausing and rewinding (and swearing) I managed it, cheers dude 👍🍻
I have been stressing for 3 days having removed the door seal, could not get the bugger back on. Considered getting an engineer to sort and fit the new lock but you are a hero. Just went downstairs and tried your method from the video, the springy round coil is a bitch but all done. thank you so much. J
Great. Very useful, real-world, practical guide. Getting front panel off was slightly different on my model but the seal basics were identical. Many thanks. Was a massive help!
Thank you!!! i was about to buy a new washing machine this morning because i pulled the seal all the way out while stupidly trying to clean it and not knowing it has a back tight ring as well, i saw your video and i have a different brand machine but it was enough for me ,,, thanks again for your video! worth gold i was looking for a clip in Hebrew (live in Israel) but they all have a lame explanation with a bad camera angle
Many Thanks for this vid! I'm about to do this task soon. Wash liquid and pointing out the locating arrows very good tip! Just a thought - would the handles of two spoons (used like tyre levers) be useful in siting the inner spring? It looked like your fingers were nearly garrotted!
well presented your directions where easy to understand and no special tools needed use to do this long time ago but good to be refreshed excellent hope you do well thanks again xx
Washing up liquid, work slow or have someone hold it in one side while you do the other, otherwise use a couple of tiny flat blade screwdrivers to help lever it on
Thank you so much, the metal spring and wire had come off mine, and I've just managed to put it back together, I was panicking thinking I'd have to buy a new machine.
I almost was going to call a company to fit it up, but the explanation in this video helped me (fitting the inner and outer lips is the key) everything fixed together easily after that. Thanks!
Watched the video and then did a lot of pausing as I wasn’t as quick 😅 excellent tutorial and now doesn’t leak 👍
Glad it helped!
Found it much easier to refit the spring clip by starting at the bottom (with join at the top) - once a third of it is in place, you can "stand up" from the knees to stretch the spring back over the drum. Much easier than trying to pull it down as shown in the vid. Hope this helps, and many thanks for the brilliant video 👍
I did this for the first spring but second one is a nightmare
A brilliant and realistic video. Much appreciated.
Great Instructional video, I'm totally hopeless at things like this but, after alot of pausing and rewinding (and swearing) I managed it, cheers dude 👍🍻
oh, and my thumbs hurt! 🤣
I have been stressing for 3 days having removed the door seal, could not get the bugger back on. Considered getting an engineer to sort and fit the new lock but you are a hero. Just went downstairs and tried your method from the video, the springy round coil is a bitch but all done. thank you so much. J
Great. Very useful, real-world, practical guide. Getting front panel off was slightly different on my model but the seal basics were identical. Many thanks. Was a massive help!
Like to say I’ve fixed my washer machine thanks to this video, took an hr tho lol
Thank you!!! i was about to buy a new washing machine this morning because i pulled the seal all the way out while stupidly trying to clean it and not knowing it has a back tight ring as well, i saw your video and i have a different brand machine but it was enough for me ,,, thanks again for your video! worth gold i was looking for a clip in Hebrew (live in Israel) but they all have a lame explanation with a bad camera angle
Top bloke! Thanks for the video. Job done
Really useful, just changed mine without any problems
Many Thanks for this vid! I'm about to do this task soon. Wash liquid and pointing out the locating arrows very good tip! Just a thought - would the handles of two spoons (used like tyre levers) be useful in siting the inner spring? It looked like your fingers were nearly garrotted!
One would do yes
Fixed my machine. Thanks for the vid
well presented your directions where easy to understand and no special tools needed use to do this long time ago but good to be refreshed excellent hope you do well thanks again xx
You made it look so easy, but enough advice for me to tackle my own if I had to. Great vid as always x
Thankyou for this video was massively helpful :)
Thanks for the tip about washing up liquid.
I havent got a strip across the bottom of my machine so finding it hard to replace the door seal can you advise please x
There will be screws under the front of the machine and possibly one behind the filter flap
Great instructions. Thanks
Very helpful. Thank you
Does this work for all beko models? I hope so. Other videos take the top of the washer off and I don’t want to have to do that due or it’s location
Older bekos yes, current ones have a slightly different front that you need to take the lid and fascia off to remove
Why does your spring seal go on so easy at the end? My beko machine has such a tight spring seal I can't get it back on
Experiance 🤣. Get someone to help 👍
Is it possible to do it without taking the front panel off?
Yeah if you’ve got small hands
I just can’t get that final spring on it
Thank you so much for the detailed video
I'm struggling to get the circle spring back on. I am pretty close, but it keeps pulling the seal out. Any tips on technique?
Washing up liquid, work slow or have someone hold it in one side while you do the other, otherwise use a couple of tiny flat blade screwdrivers to help lever it on
Really really useful, Thank you!
Thanks so much for the tips it worked 💪👷😀god bless stay safe 🙏
Think £50 I've been quoted to fit a new one will be money well spent!