I used to pride myself in being a great pipefitter. Fitting everything from 3/4” screw pipe to 96” sch. 160 pipe. From carbon steel to NASA graded exotic metals. But I never touched Victaulic pipe… the first time I did it humbled me 😂😂
Hi Muhammad, Thanks for reaching out. The lubricant is for installation purposes, not for sealing purposes. The lubricant helps the gasket/coupling fit into place and helps to avoid pinching of the gasket during installation. The compressive force created by the two coupling housings during installation seals the joint.
Hi, I have question Can we use this one to connect 2 pipe that has the same inner diameter but different outer diameter ? In my case, inner diameter DN150, but outer diameter is D160 and D166
Thanks for reaching out, The Style 31 is designed to join AWWA sized pipes that match in outside diameters. The Style 31 is not designed to transition between two different outside pipe diameters. Please use the link below to see our product submittal for more information. www.victaulic.com/products/style-31-awwa-coupling/
We would like to gain more information to best answer your question. Please visit the link below to get in contact with Applications Engineering. www.victaulic.com/technical-questions/
Hi Dave, thanks for reaching out. Installation of the Victaulic Style 31 coupling should be performed according to the directions contained within the Victaulic I-300 Field Installation Handbook for AWWA Products (www.victaulic.com/assets/uploads/literature/I-300.pdf). There is no bolt torque requirement for proper installation of the Style 31 coupling. Instead, it is necessary to achieve metal-to-metal contact at the housing bolt pads. An impact wrench may be used for the installation of the coupling’s hardware and should be used in accordance with the guidelines published on page 64 of our I-100 Field Installation Handbook (www.victaulic.com/assets/uploads/literature/I-100.pdf).
Cela ne vous montre pas comment il a fait la fente dans le tube, car cela ne vous montre pas qu'une machine oléo-hydraulique motorisée lourde et encombrante est nécessaire et quelqu'un a commenté ci-dessous quelle super vidéo c'est... oh la jeunesse.
The Style 31 can provide either a flexible or rigid joint depending on how the groove on the pipe is prepared. Please reference the I-300 Field Installation Handbook (Page 11 and 12) for the specific groove dimensions for either application. Click here to view the I-300: www.victaulic.com/assets/uploads/literature/I-300.pdf
Cela ne vous montre pas comment il a fait la fente dans le tube, car cela ne vous montre pas qu'une machine oléo-hydraulique motorisée lourde et encombrante est nécessaire et quelqu'un a commenté ci-dessous quelle super vidéo c'est... oh la jeunesse.
Thanks for reaching out, there are no hydraulics or heavy, cumbersome tools involved with this cut groove. You can check out this animation to see how it works → th-cam.com/video/LiBljxVu43Q/w-d-xo.html
Hola Eynar. El lubricante en el video se llama “Vic-Lube” y esta formulado para que sea compatible con todas nuestras empaquetaduras. El lubricante no está basado en petróleo, y se disuelve cuando está en contacto con el agua. Cualquier lubricante utilizado para la instalación tiene que ser compatible con la empaquetadura del acople. Avísenos si tiene alguna duda. Gracias.
I used to pride myself in being a great pipefitter. Fitting everything from 3/4” screw pipe to 96” sch. 160 pipe. From carbon steel to NASA graded exotic metals. But I never touched Victaulic pipe… the first time I did it humbled me 😂😂
NASA is less relevant than Hollywood
afternoon sir, i have something to ask you
what the function giving lubricant to gasket sealing ?
Hi Muhammad,
Thanks for reaching out. The lubricant is for installation purposes, not for sealing purposes. The lubricant helps the gasket/coupling fit into place and helps to avoid pinching of the gasket during installation. The compressive force created by the two coupling housings during installation seals the joint.
Hi, I have question
Can we use this one to connect 2 pipe that has the same inner diameter but different outer diameter ?
In my case, inner diameter DN150, but outer diameter is D160 and D166
Thanks for reaching out, The Style 31 is designed to join AWWA sized pipes that match in outside diameters. The Style 31 is not designed to transition between two different outside pipe diameters. Please use the link below to see our product submittal for more information.
www.victaulic.com/products/style-31-awwa-coupling/
If there is a leak coming from the coupling, would it be because there is a tear in the gasket, or if it slid out of position?
We would like to gain more information to best answer your question. Please visit the link below to get in contact with Applications Engineering.
www.victaulic.com/technical-questions/
This design is dumb becuz the gasket oxidise over the time and it leaks...
Nice very easy to join two pipe together done 👌👍
Is there a recommended torque tightness to the nuts? Can you use a m12 milwaukee stubby impact for tightening? It has 250 ft-pounds of torque
Hi Dave, thanks for reaching out.
Installation of the Victaulic Style 31 coupling should be performed according to the directions contained within the Victaulic I-300 Field Installation Handbook for AWWA Products (www.victaulic.com/assets/uploads/literature/I-300.pdf). There is no bolt torque requirement for proper installation of the Style 31 coupling. Instead, it is necessary to achieve metal-to-metal contact at the housing bolt pads. An impact wrench may be used for the installation of the coupling’s hardware and should be used in accordance with the guidelines published on page 64 of our I-100 Field Installation Handbook (www.victaulic.com/assets/uploads/literature/I-100.pdf).
At my hospital, we use the big 1/2 inch impacts on them..
meilleur vidéo du monde 10/10 bravo a l'auter un pur chef d'oeuvre
Cela ne vous montre pas comment il a fait la fente dans le tube, car cela ne vous montre pas qu'une machine oléo-hydraulique motorisée lourde et encombrante est nécessaire et quelqu'un a commenté ci-dessous quelle super vidéo c'est... oh la jeunesse.
are the pipes supposed to be shaky or loose fitting?
The Style 31 can provide either a flexible or rigid joint depending on how the groove on the pipe is prepared. Please reference the I-300 Field Installation Handbook (Page 11 and 12) for the specific groove dimensions for either application.
Click here to view the I-300: www.victaulic.com/assets/uploads/literature/I-300.pdf
Good job brother
Cela ne vous montre pas comment il a fait la fente dans le tube, car cela ne vous montre pas qu'une machine oléo-hydraulique motorisée lourde et encombrante est nécessaire et quelqu'un a commenté ci-dessous quelle super vidéo c'est... oh la jeunesse.
Thanks for reaching out, there are no hydraulics or heavy, cumbersome tools involved with this cut groove. You can check out this animation to see how it works → th-cam.com/video/LiBljxVu43Q/w-d-xo.html
It's like pro press from the 80s that doesn't last
Esa es una grasa natural para cauchos..
Hola Eynar. El lubricante en el video se llama “Vic-Lube” y esta formulado para que sea compatible con todas nuestras empaquetaduras. El lubricante no está basado en petróleo, y se disuelve cuando está en contacto con el agua. Cualquier lubricante utilizado para la instalación tiene que ser compatible con la empaquetadura del acople. Avísenos si tiene alguna duda. Gracias.
Nice
Ya looks easy lol.
Nice