When i put the year a round cab on the 966 for the feed mixer i did the foam right away. About a year later i put some carpet on the floor, made a world of difference with just that aloan.
Job well done, that's a real Tractor...No Electro sh...!! Another Greetings from Germany, see you next time!! (Now let's so the Same in the Versatile😅)
Good one J T , you done a good job on the MF 1800 cab kit , look great . It look alot easer to do , than my old JD 3350 . It was a pain , i didn't quite get it right .. but was ok .
@@jtsbarnngrill6873 i forgot to mention my dad and i did a cab refit on our steiger a few years back and what we used was a lead lined kit which dropped the sound down to 61 decibels from 75
Looking good! The heaviest seat i ever handled was the "air" seat in my 82 IH S2155. That was engine hoist heavy! Last month i put carpet in my 65 F350. Like a good soldier i made accurate templates. On rhe passenger side i forgot to flip the template over as i was cutting from rhe back side!😮 Oh well, at least I'm "saving big money..." I didnt attempt to cover rhe "hump" so it only cost me about $10.00 for the carpet and $100.00 for the gas!😅 Hopefully next year will being down the cost of energy! Thanks
Nice job JT. Would it be possible to add an insulation mat on the firewall on the engine side or is there one already there? If the hood resonates you can add mats under the hood. Just my thoughts.
It may I ask a question ? I remover a good while ago you looking and starting an old 4wd rigid frame International tractor , have you got that home yet or done any more too it ? I believe it had a couple of badly damaged tyres .
Nope, I’ve made mention on this in a few vids, but that deal did not work out. Doesn’t mean I won’t get my hands on it someday but for now it’s not going to work out.
Looks like my 6' would be a not stand up straight. Of course I can't stand up straight in my car either. Unless I open the sun roof like on "back to the future".
I don’t. The original tach had 3300 on it, but who knows when that gave out. I know that tractor has been setting since the early 2000s, but it’s hard to say
That Tac looks like a factory upgrade with the orange needle!!!
Right on!
She looks so much better. I can't believe you actually made a Kardashian quiet 😂😂. Great job, JT. Happy farming is coming this spring.
Thank you 😆😆
Nice job jt. I used some cattle mat from tractor supply you know that heavy rubber mat. It's hard to cut but man it's the best thing I've used
Right on! I’ll bet it takes a lot to cut that thick stuff!
When i put the year a round cab on the 966 for the feed mixer i did the foam right away. About a year later i put some carpet on the floor, made a world of difference with just that aloan.
Right on!
That will certainly help with headaches, and it looks good too! Thanks for sharing!
Thanks! Made that cab much more pleasant!
Awesome. You are one smart guy. Enjoy those old masseys. Thanks for the ride.
Appreciate it!
stove pipe insulation blanket works well as well plus a 3rd of the cost
Right on
Great job! Looks real professional. Maybe you can screw a metal threshold at the door to keep things in place and not rolled up by your boots.❤
That’s a good idea!
She's looking great JT 👍👍
Thanks!
Great job JT, she is looking good 👍🏻
Thanks!
Awesome J.T looks good you kinda inspired me to repaint one of my ole Massey Ferguson tractors
Right on!
That looks awesome JT. Nice job.
Thanks 👍
I can’t believe you made it through the process without spraying the wrong side of the foam!😂
😆😆😉. That happens lol
Job well done, that's a real Tractor...No Electro sh...!!
Another Greetings from Germany, see you next time!!
(Now let's so the Same in the Versatile😅)
Your new shop comes in handy today great investment and nice for making great 👍 videos 😊
Right on!
Awesome job JT!
Thanks!
Nice Job J.T.
Thanks for the show! 👍
Wish you a nice weekend.
Greetings from the Neterlands. 🇳🇱
Marc 🤠
Thanks! You too!
Good one J T , you done a good job on the MF 1800 cab kit , look great . It look alot easer to do , than my old JD 3350 . It was a pain , i didn't quite get it right .. but was ok .
If it works it works 😆
very nice , another job done on to the next one
Bingo!
@@jtsbarnngrill6873 i forgot to mention my dad and i did a cab refit on our steiger a few years back and what we used was a lead lined kit which dropped the sound down to 61 decibels from 75
That’s a big difference
I really like where the cab is on this tractor, forward. Not like on the Ford 2+2. This thing is really good for the operater comparatively.
Right! I’ve always thought that about these as well
Great job 👏 keep it coming
Thanks!
Then its beer o clock jt🍺good job mate cheers from down under 🇦🇺Monday it’s going to be 45 degrees Celsius 🥵on Monday
Cheers!
Great video as always loved the Kardashian’s comparison 😂😂😂
Thank you 😁
Looking good! The heaviest seat i ever handled was the "air" seat in my 82 IH S2155. That was engine hoist heavy! Last month i put carpet in my 65 F350. Like a good soldier i made accurate templates. On rhe passenger side i forgot to flip the template over as i was cutting from rhe back side!😮 Oh well, at least I'm "saving big money..." I didnt attempt to cover rhe "hump" so it only cost me about $10.00 for the carpet and $100.00 for the gas!😅 Hopefully next year will being down the cost of energy! Thanks
Right on! This seat wasn’t bad, but some of them are unbelievable heavy loo
JT, hope u had tighten the bolts holden the bottom plate-on, to keep her from dancing the jeg. great job on the cab. Fluffy approved
Right on!
Looks and sounds awesome !
Thanks!
Looks great 👌
Thanks 👍
Nicely done JT, never ever barrow your wifes scissors, mine is a quilter,I know not too.
Thanks! You're right!
Job well done 👏
Thanks!
Good job jt.
Thanks!
Nice job JT. Would it be possible to add an insulation mat on the firewall on the engine side or is there one already there?
If the hood resonates you can add mats under the hood.
Just my thoughts.
Right on! That would help
It may I ask a question ?
I remover a good while ago you looking and starting an old 4wd rigid frame International tractor , have you got that home yet or done any more too it ?
I believe it had a couple of badly damaged tyres .
Nope, I’ve made mention on this in a few vids, but that deal did not work out. Doesn’t mean I won’t get my hands on it someday but for now it’s not going to work out.
Looks good!
Thanks!
Touching 30000👍👍
Nice job 👍
Thank you so much 😀
J.T.'s Half Fast Cab Insulation Documentary. It went well.
Thanks!
Getting a good cardio workout today!😉
For sure!
The decibel scale is not linear. Every 10 db is 10 times as loud. That's a big difference. Pretty sure that's the way it works.
Gotcha! I have no idea how that all works, but it is definitely a lot quieter from a personal standpoint
Is Santa going to bring Mrs. JT that corvette or will it be the Easter Bunny?
Probably the Easter bunny 😆
Idea for wife Christmas present: new sewing scissors 😮
😆😆😆😆
ask santa for a small exaust fan for your shop that new building is probably a lot tighter then your old barn just a thought
Right on! I’ve been thinking of that,
If there is no wind that smoke will hang there a long time
That pipe could have been a start of a beer holder
It could still become one…. I left the base there 😉
Great job JT..awesome...old tractor..
Thanks 👍
When are you moving in?
Summit racing sells a heater for like $200.
Perfect!
after all you have done to the 1800 what could you get for it.?
It’s hard to say, I’ve seen them on marketplace as high as 8k, but not as nice as this one. But seems like they don’t sell very fast
No safety glasses in the instructions 😂
😆😆
Did you watch Farmer Phil and his yellow Massey Ferguson 1200 and Massey Dave repairing Massey Ferguson tractors
Yes. I watch Massey Dave quite often
Looks like my 6' would be a not stand up straight. Of course I can't stand up straight in my car either. Unless I open the sun roof like on "back to the future".
Right on 😆😆
👍
👍🏼
Jt is trying to glue himself to the Massey sasssey 1800 lol because jt is in the cat house lol
😆😆😆
You made a diamond out of a turd. Do you know how many hours the tractor has on it?
I don’t. The original tach had 3300 on it, but who knows when that gave out. I know that tractor has been setting since the early 2000s, but it’s hard to say