Great video. Bro only thing you forgot is that you also have to check the gun itself is levelled along with scope. This will eliminate or minimize cant. Could you guide me that whether diana 34 classic is a better option or diana 350 magnum
Both rifles are going to be very good. The 350 is bigger, longer, harder to cock, harder on scopes and shoot well than the 34 EMS. Did you buy one or the other?
Just bought my first rifle last week and haven't bought a scope yet but i'm looking at how to mount and zero it in. Are you sure your table and rest are sat 100% horizontally? If they aren't then you've just bolted your scope down on the piss!
Hi, very good video. I have recently purchased a .177 and had a scope delivered. I’m a little unsure about something. I have watched you video regarding how to fix the scope which was very helpful. My question is when I focus my scope am I focusing on the cross hairs when I set the scope up or the target. I understand from your video about windage and up and down but I am unsure about my scope as to what I should focus on for the purpose of setting the scope up. Kind regards Ken.
❤ perfect. I did like that with my heavy recoil Diana 48 and Hawke 4 × 12 50 AO Airmax Scope. Used 3 water Bubble levels. But the problem is the rings come lose after 20 shots I need to re tighten the rings. And notice Im getting higher ore lower on target. I use Hawke Match Ring Mounts 9-11 mm 1 inch High Double Screw. Now I tried blue and Red Loctite. Because Im scared to over tighten the rings. Wait until dry and then retry.
Why did you not put the mount with the arrester pin in the rear ( correct ) place on the rail? I'm puzzled that you mentioned how good the arrester mount is then mount it on the forward section of this Diana rifle where there are no corresponding arrester holes!
The first thing you need to do is level the gun cant in the rest, you completely missed this important step. Also the correct amount of torque needs to be applied to the bolts on the ring caps, this is around 1.6nm on the Hawke scopes. You know Mark if your showing a beginners tutorial on scope mounting, you need to show everything correctly, or you are unfairly misguiding the viewer.
Great video. Bro only thing you forgot is that you also have to check the gun itself is levelled along with scope. This will eliminate or minimize cant. Could you guide me that whether diana 34 classic is a better option or diana 350 magnum
How can you ask this guy a reliable question on airguns, when he doesn’t even know what he’s talking about when mounting a rifle scope.😏
@@Teddybear.44 well i guess you are right since he didnt replied ;)
Both rifles are going to be very good. The 350 is bigger, longer, harder to cock, harder on scopes and shoot well than the 34 EMS.
Did you buy one or the other?
Just bought my first rifle last week and haven't bought a scope yet but i'm looking at how to mount and zero it in.
Are you sure your table and rest are sat 100% horizontally?
If they aren't then you've just bolted your scope down on the piss!
Very helpful I did the same way
Hi, very good video. I have recently purchased a .177 and had a scope delivered. I’m a little unsure about something. I have watched you video regarding how to fix the scope which was very helpful. My question is when I focus my scope am I focusing on the cross hairs when I set the scope up or the target. I understand from your video about windage and up and down but I am unsure about my scope as to what I should focus on for the purpose of setting the scope up. Kind regards Ken.
❤ perfect. I did like that with my heavy recoil Diana 48 and Hawke 4 × 12 50 AO Airmax Scope. Used 3 water Bubble levels. But the problem is the rings come lose after 20 shots I need to re tighten the rings.
And notice Im getting higher ore lower on target.
I use Hawke Match Ring Mounts 9-11 mm 1 inch High Double Screw.
Now I tried blue and Red Loctite. Because Im scared to over tighten the rings.
Wait until dry and then retry.
Why did you not put the mount with the arrester pin in the rear ( correct ) place on the rail?
I'm puzzled that you mentioned how good the arrester mount is then mount it on the forward section of this Diana rifle where there are no corresponding arrester holes!
Watch from india
We’re your can buy those rings with the stopper “pin”?
I have been using that way for years but use the screw they give you for the. Stop
The first thing you need to do is level the gun cant in the rest, you completely missed this important step. Also the correct amount of torque needs to be applied to the bolts on the ring caps, this is around 1.6nm on the Hawke scopes.
You know Mark if your showing a beginners tutorial on scope mounting, you need to show everything correctly, or you are unfairly misguiding the viewer.
Viva Christo Rey