I built the "Budget pro build" for my first fpv drone and am definitely not disappointed, great build, great assembly instructions, great video. Thank you!
Ran it with a 3s to test it, but realized I didn't plug an antenna to the VTX, so I immidiately unplugged it. Mounted the antenna, ran it again, and short... Smoke came out in a burst. Still, connected again with the VTX original antenna, and it is running with lights on, but I suspect it's toast. Any thoughts on this?
Question is does it still work? If so then it’s fine and u got lucky if not then something fried and u would need to take it apart to see what fried and why
Krusty good question, my experience with mounting the vtx on the top plate is that it always gets knocked off and broken. Putting it out the back like I did protects it a lot better than having it on that top plate.
@@ViperFPV Good to know. I just got my TX1200 in, and the MMCX to SMA pigtail that came with it dosen't look like yours. Was this one you had lying around? Mine can't double-over like that; too thick.
Great video and easy to follow, except when you got to the receiver end of the video, I got confused when you showed/said two different receivers. I just got into this hobby and didn't realize you went with the crossfire nano. I wired my r-xsr like your nano... and after it not working in betaflight and some searches found out that it uses sbus (like you said in your video, I just didn't know the difference) Maybe point to the sbus on the actual stack next time for the noobs like me :) Other than that really helpful video so Thank You!
Thanks for a very informative video. I wish the soldering points of attachment were shown via schematic too ; as a newbie to builds it's a little confusing to always understand which is which. But all in all great video.
Hi. I was wondering if one of the products that you have in the description has the xt60 7:02 that comes with it, or do I have to buy it separately? Also, do the wires that you used with it come with xt60 or do I have to buy that separately also? Last question lol. Does this setup come with all of the screws, wires, etc? Thanks in advance!
The Antenna is sold out can anyone tell my how i can find out wich antenna fits or is suitable? Im new to this and can't figure out what to look fo and what fits what and so on... :) Glad for your help!
I built it. Some links are broken, and some items are another than on video. I also would buy another receiver and transmitter (TBS tango 2 and crossfire). Anyway, thank you for guide, but It's not clear to me how to attach gopro 8 and avoid drone's part to be on image? Is it possible?
Which lipo batter is required to this quad I am an complete rookie in this hobby plz help :( and can u help me with a good transmitter with this comparable for this quad
5:58 Hey I quite dont understand how you mounted the standoffs. My Mamba dosnt came with standoffs just with rubberrings on the dowwnside. I have 4 standoffs with the Frame but if theyre the right one I'm missing 2 screws because the others are tow long. Can anyone tell me how to mount them or where i find the right parts?
I can confirm that I need to install fc in another way. Screws are 12mm but should be 10. I put plastic washer to "inner" screws, to compensate 2mm, also I used 4 long screws from mamba fc, instead of frames the longest screws.
First off, I want to say thank you for this video, I am doing the basic budget build and it has been very helpful to watch this. I have one question, you talk about the rxsr reciever but then also a crossfire nano, are you using two receivers?
I'm complete noob, so sorry if this is a dumb question, but would it work with fullsize GoPro of similar knock off? I ussualy see it with GoPro session, so just wonder if there is enough power for extra few grams or would it messup balance of the drone?
Much thanks for this build guide. I opted for the pro build but I'm running into an issue where all my motors are spinning CW. Any suggestions on how to fix this?
Derek Bradfield yes u will either need to swap to motor wires around on the two motors u want to spin the opposite way or you can change motor direction using Blhelisuite
Most of the hardware and wire all comes from the parts you purchase. Stack screws come with the stack, frame screws come with the frame, motor screws come with the motors. Xt60 comes with the FC stack...etc
Antennas any mmcx right hand antenna will work. Regarding cameras any mini to full size camera will work. I would suggest the Caddx Ratel as a substitute
I just started watching this and i’m definitely gonna build it, does this include everything, like battery and program for it and how to do it and other things that an inexperienced fpv drone flyer would need?
This is part 2 of a build series check out the playlist as after you build it u will need to program it which I have made a video on. You I have tons of tutorials to set everything up. 63/37 solder is my recommendation
Hey bud great video but I have a question, I don't want to build a drone so what kind of freestyle drone would you recommend that I buy, is there a kit that's ready to fly with the transmitter? I'm not really a beginner, I used to fly RC helicopters and I had A DJI mavic drone that I used to fly for years and a few others.
Hello, thank you for the tutorial. We have a question : at minute 9, you are connecting the vtx connector and said to remove the black and red cable for the camera but you mentioned that you are not doing it but later in the video, the extra red and black wires are no longer visible. When , how and why did you remove them? This is our first build and we are following step by step and afraid of mistakes. Thanks in advance
@@NavJack3078 you can find something that is cheaper but it normally will fall apart in a few months or requires other components like a power supply for the charger. Do your own research if you’re genuinely thinking of buying something, but that’s a pretty good charger and the batteries look like they’ll last you a long time (I know this is like 2 months but I thought I’d still respond 😆😅)
Hi, I'm looking to build this drone but i am a complete beginner. after I have built, how will i view the camera in real time also how will i control it?
I've built this quad with the pro version with the new emax eco II, it's an amazing quad, thanks for sharing your build! I wanted to know if anyone has built it, my motors get hot no matter what I do. I tried lowering the PIDs but they are still getting rather hot. Is this normal?
@@ViperFPV When I just ride casually, it gets pretty hot, but I don't get burned from holding it longer than 5 seconds. But when I fly real fast and snappy, it gets hot to the point where If I hold the motor for more than 5 seconds, it's uncomfortably hot, like I'd probably get burned for holding it too long. Thanks for the help by the way!
Where do I plug the i-bus from receiver when Im already using TX3 from the vtx? can I plug the receiver to RX3 or not? Or am I stuck to the PPM pad? This is my first kwad. And Im a noob at this..
I am 75% done with this build. I did not see a receiver in your parts list. What receiver do I need to get? I’m using a Jumper T16 Pro Transmitter. Help please! I am ready to get her in the air!
Viper_FPV everything complete. But I just cannot get the ESC to send power to motors. No beeps when I plug battery in but all components powered up. Betaflight sees stick inputs, set arm switch. Can throttle the yellow lines for each motor up but motors nothing.
Viper_FPV no. No beeps. And motor screws length are not too long, they are flush. It actually came out a super clean build so I’m stumped. Maybe a faulty ESC.
Hi there, I have purchased all the parts for the pro build using your links. The areal is currently OOS, Are there alternatives. Also I have a Spectrum DX6 and a receiver. Can these be used and if so what if any changes are required? Likewise I have a Fatshark Dominator V3? Thanks for any advice. Cheers
Viper_FPV sorry for the shorthand. OOS is out of stock. Also the 2400 motors appear to be the same. Can I substitute the 1900 motors? Won’t be doing heavy freestyle yet as am a beginner.
This is the best bird get drone build I have seen, it’s cheaper then the rest but looks really good, I am a big ginger and hope I can buy the parts and build it with no problems.. I have a question, I am going with the base build and was wondering if I could use the pro builds motors on it? And also a different antenna?
@ Viper_FPV Hey it seems I cant't tighten up the props. They are kinda loose on the motors even though the screws are tightened . Have bought the wrong ones? Wich are the right ones for the Emax Eco 2306 series? Hope someone can help.
@@ViperFPV problem solved turned out I was just too anxious to tighten the nuts strong enough. Did not want to break something. Thanks for your replys. You're doing great work
Do i need to purchase soft mounts separate? I've been watching builds and they mention installing the soft mounts. Im doing this build when my frame comes in! Very excited!
Love the Build but I'm having issues with the VTX/Camera. I have double, triple and quadruple checked my wiring and voltages. Betaflight is setup but i cant seem to get any video to my goggles. Any ideas?
@@ViperFPV I get snowball static to start, when I power the quad it goes black static. One thing I also did last night was bypass the FC and connect the Camera to the VTX, that gave me video in my goggles and the foxxer OSD. So the Camera is working, but I cant seem to get the video to go through betaflight to the VTX. Based on that, do you thing the FC was DOA?
What uart did we use to crossfire? Im binded but I'm not getting any inputs into betaflight. Do you have a betaflight setup for this build? Im using a Tango 2 with a crossfire nano receiver. I'm 8 hours in to checking everything and starting to get very discouraged. I've double and triple checked my rx is going to tx and tx is going to rx. Ive even switched them around to be extra sure. I'm not sure what is going on and nobody in any facebook group, discord, or forum is able to help.
@@ViperFPV Thanks! I got everything working fine after watching this! Then, when I attached the top of the frame to the body, for some reason I ended up smoking my 4in1..... Unfortunately I can't get another one for a few weeks so back to the sim I go
Thanks for the quick reply! Was also curious how this drone would compare to something cheaper like a eachine tyro 99 im on a bit of a budget and the price is adding up very quick for this build and was wondering if its much difference for the price?
Where can you find information on how to build one, wire one up and any other info! Im still learning the lingo and have no idea what all the components even do. I am however a technician in a field that has given me experience soldering and performing lots of different types of wiring and electrical problems so i should be able to adapt pretty fast.
Is there a service to assembly this kit? I don’t know how to soldering small contacts. Is it necessary any programming after all? I want one this, but working. Do you recommend someone?
Thanks for this video. I can't really afford a DJI mini and really want to learn how to build my own drone. My understanding is that an FPI will be a lot better than a DJI mini or even pro? Can you confirm this?
Im new to fpv. Would like to do your build, but could I change the eachine tx with a frsky r xsr? Pros and cons? Because I have already one and I heard its really good. (Btw: Own a Qx7... would there be problems to bind with the eachine?)
Isegrim No Kage hey! I think you are confusing the eachine TX? With a receiver. The eachine vtx is a video transmitter not a receiver so u would need to purchase a video transmitter eachine or whomever and then u also need a receiver which you can use the rxsr just fine. Any more questions let me know
Yes, my bad 🙈 just looked at your video description, and now after watching your video I saw you used a r xsr 😂👍🏻. But: You said you installed the crossfire reciever under the mamba stack, so youre using two recievers? Redundant (if thats the word)?
Update on my build... Just put a new ESC bottom in from the one I thought burnt out. Turns out that was not the problem. I replaced the 4in1 with a brand new one and plugged a fresh pack in. Beta flight is only recognizing my 6s as a 2s and the motors still wont spin. Im at a loss now and I simply can NOT get this thing to work.... I've done EVERYTHING by the book. Checked everything so many times and still Im at a loss... if anyone sees this who is willing to help me at all please, help
Okay, so I've watched this video over and over and looked in the description what is the TBS nano receiver? I am a complete newbie with this and I am very confused. Also along with that how does it work does the frsky hook up to a pair of goggles or do I need the other part to one of the receivers as well.
Nano receiver I used is for crossfire which is a 900mhz long range link. Frsky is another receiver but on the 2.4ghz band. Which one you use is up to you and your budget. I use crossfire because it does help with penetration with a lot of obstacles. But for a newer pilot frsky is great also. Frsky and crossfire are radio receivers ( controls the aircraft) The video transmitter is what will transmit the video to your goggles which uses the 5.8ghz band
@@ViperFPV Okay awesome thank you. So if I were to buy everything that I would need to make this build I would need: Frame, ESC, FC, VTX, Antenna, Motors, Props, Transmitter and remote, and then a pair of goggles? Do I NEED the rapidfire?
@@timoty-pb3rs Unless you’re flying in really sketchy spots (to which I’d say a beginner shouldn’t anyway) or flying really really far away (which you also shouldn’t do without experience) I think you’re fine on not spending an extra hundred 👌
This is just an amazing build. I really want to get into this drone thing but my budget is limited. When you say $120 I would probably spend around $200 for some more tools and some parts I break in the process. But this looks really interesting.
I built this exact drone! It’s very good so far but I haven’t gotten to fly it yet. If u want u can see me (a noob) build and get the drone into the air! (Plus a crash lol) I posted my video of this yesterday, thx for this build as it is my first ever quad! :)
Have just received all the parts for this and started to put together. The frame comes in pieces so instead of removing the top plate I have to figure out assembly. That includes the insertion of the nuts in the carbon fiber. This was not straight forward and I stripped to screws and had to deal with the associated effort to remove. The stack was already assembled so I am not clear how to install stand offs etc. is there a reason for the difference. Btw, this is my second quad. I build the JB one while waiting for Banggood to deliver stuff. Cheers
@@ViperFPV Sure, that makes sense, but your video does not start from that point. You take the top layer off etc. So for beginners it is a little bit of trial and error. I started and stopped, rewound and paused your video to try and make sense of it. I researched the carbon fiber nuts and some hammered and some screwed tight. I went the screw route and ended up stripping two of the hex bolts and having to buy tools to remove those etc. I am sure it will work out, just harder than I expected. Cheers
Alright I'm going to attempt it. Have any recommendations for different motors though? Or should I just find any 2400Kv motors? Banggood only has three of the ones above in the US, and it's totally grayed out when switching to China.
@@ViperFPV I want to get started with my first build, I want something that can fly far and for around 20 min, any build videos you can recommend ? I have a lot of range problems with my mavic air (ps: thanks for the reply)
Hi, please help, I just built the drone based off your video with the FrSky XM Plus Mini Receiver and I have it bound to my transmitter... However when I go to plug the drone into betaflight the drone pops up but the transmitter does not. I have a battery plugged into the drone and the green light is on on the receiver saying it is bound to the transmitter... I cannot get the transmitter to hook up to betaflight. It is a taranis x9lite, and I have downloaded the firmware with d16 already. Please help as I cannot get the drone to fly without the transmitter connecting to Betaflight. It says RX_FAILSAFE and MSP for the flags. I am confused why the receiver says no connection when the green light is on saying it is bound.
Also might be important to note when I plug in the battery my motors move a little bit and the board beeps 3 times but that is it... When I try to move them in betaflight with the sliders or with my transmitter nothing happens.
That is normal for it to beep and the motors to move when u first hook up the battery. Did you setup the configuration for the receiver in the configuration tab of betaflight?
So I just finished this build and on startup, before syncing to a controller or anything 1 of my motors stutters and spins on its own and ends up heating up if I leave it long enough! I have no idea what could be causing this or how to fix it :(
Check you solder connections to the esc make sure there are no shorts. Also check your bolts on the bottom of the motor and make sure they are not touching the windings. Let me know
So I've checked everything from that motor and all seems fine, I've double checked with the voltmeter in continuity and doesnt seem to be anything shorting as far as I can tell but I'm no expert! Windings are all good I've backed the screws out just to double check. The only thing is I haven't added a receiver yet as I didn't realise this was separate to the VTX :/ I'm stumped
Frame HSKRC VO235 5 inch Frame Good!)) I would replace the engines with EMAX ECO II with the installation of "soft-toch" under them, treat the contact soldering pads with Sealant 704. The receiver, for example, is a full-range Frsky XM ("Long-range" at the initial stage need not). It is easier to "link" them before setting them to Frame. CADDX Turbo EOS2 camera - for example. The VTX power supply must be blown through a separate connector, it allows you to turn OFF the TRANSMITTER during service. I'm waiting for the RPM setup video. Can you customize RPM in the simulator? to compare the quality of CONTROL ??. Thank you very much for the video.))
be carful with that threadlocker it gets on a standoff bolt and it’s over...i stopped using threadlocker and treat my quad like a old harley and tighten my screws after ever flight....but yes i like this budget build ......good job
This is what I don't get about the thread locker on quads. I club race motorcycles and we don't use loctite/thread locker on consumable hardware. We do a pre and post check on all hardware when we race. Nice to see another 2 wheel brother that understands this lol
Definitely feel like a few of those 'pro' changes are actually mandatory changes. Racerstar35Anniversary/RCharlanceF4Pro2/RCX NK2306.5 on that frame with an XM+ is going to outperform everything there for less money.
@@ViperFPV Got to help with a fairly big project where we build a couple dozen quads on that that hardware - statistically significant failure rate. Not that Racerstar stuff is typically much better... but that particular ESC is a good design, and RCX motors are a great value. Definitely appreciate you bringing that frame to my attention - I'll probably add a couple to my beater fleet.
Have you built this quad? Here is the specific Betaflight 4.1 Guide on setup th-cam.com/video/dGh-MEcLm4I/w-d-xo.html
Not yet. :C
Yes i did it. Hi from Argentina. I made this drones with your instructions. Thanks!
what batteries should i use?
You mention at the end of the video that you need to leave a wire to shut off the camera osd but how do you you do that and do you need to do that?
This channel is under rated. Great video
Thank you
I built the "Budget pro build" for my first fpv drone and am definitely not disappointed, great build, great assembly instructions, great video. Thank you!
Dafydd Smith that’s Awesome! thank you!
what battery did you use?
at 12:50 you show that the receiver is mounted under the ESC, but then mention you are adding another receiver, I don't get it?
I believe I was explaining how to wire a crossfire receiver and then a frsky receiver depends what protocol u use and you only need 1 radio receiver
Ran it with a 3s to test it, but realized I didn't plug an antenna to the VTX, so I immidiately unplugged it. Mounted the antenna, ran it again, and short... Smoke came out in a burst. Still, connected again with the VTX original antenna, and it is running with lights on, but I suspect it's toast. Any thoughts on this?
Question is does it still work? If so then it’s fine and u got lucky if not then something fried and u would need to take it apart to see what fried and why
@@ViperFPV I can still select band and channel on the VTX, but I'm not sure if it's fried or not. Maybe the FPV camera is not working?
Is it okay if I don’t use nylon screws?
bro what battery,and capacitor did you use on this quad? thanks man.
just wondering, im no expert but i think i see a place for the vtx antena to mount on the top plate, why he didnt use it?
Krusty good question, my experience with mounting the vtx on the top plate is that it always gets knocked off and broken. Putting it out the back like I did protects it a lot better than having it on that top plate.
@@ViperFPV Good to know. I just got my TX1200 in, and the MMCX to SMA pigtail that came with it dosen't look like yours. Was this one you had lying around? Mine can't double-over like that; too thick.
when you buy motors and frame does it come with extra screws or do you need to purchase screws, nuts, standoffs and so on separately?
Krusty it comes with all the hardware and the motors come with motor screws
@@ViperFPV thanks
7:19 xc16? were did you get this from?
I am wondering the same thing!
Great video and easy to follow, except when you got to the receiver end of the video, I got confused when you showed/said two different receivers. I just got into this hobby and didn't realize you went with the crossfire nano. I wired my r-xsr like your nano... and after it not working in betaflight and some searches found out that it uses sbus (like you said in your video, I just didn't know the difference) Maybe point to the sbus on the actual stack next time for the noobs like me :) Other than that really helpful video so Thank You!
MagicBob sorry about that! Thanks for your input!
@@ViperFPV Nah its all good, honestly made me learn more about my quad so all good
Thanks for a very informative video. I wish the soldering points of attachment were shown via schematic too ; as a newbie to builds it's a little confusing to always understand which is which. But all in all great video.
Matt R thank you. Once you build a few you get the hang of it. Until they change something lol
Hi. I was wondering if one of the products that you have in the description has the xt60 7:02 that comes with it, or do I have to buy it separately? Also, do the wires that you used with it come with xt60 or do I have to buy that separately also? Last question lol. Does this setup come with all of the screws, wires, etc? Thanks in advance!
Micah Evearitt the stack comes with the xt60 and wires.
The frame comes with the screws.
@@ViperFPV Wow, that's actually awesome!
The Antenna is sold out can anyone tell my how i can find out wich antenna fits or is suitable? Im new to this and can't figure out what to look fo and what fits what and so on... :) Glad for your help!
Any mmcx
@@ViperFPV Thanks! I appreciate your videos, keep up the good work! :)
I built it.
Some links are broken, and some items are another than on video. I also would buy another receiver and transmitter (TBS tango 2 and crossfire). Anyway, thank you for guide, but It's not clear to me how to attach gopro 8 and avoid drone's part to be on image? Is it possible?
Which lipo batter is required to this quad I am an complete rookie in this hobby plz help :( and can u help me with a good transmitter with this comparable for this quad
A 4S 1500 mah battery would be perfect, it can run on 6s 1500 battery if u went with lower kv motors like 1700kv
Would I be able to use this antenna? (current listed is sold out). If yes, what connector would be compatible for the VTX? (RP-SMA Male / SMA Male)
5:58 Hey I quite dont understand how you mounted the standoffs. My Mamba dosnt came with standoffs just with rubberrings on the dowwnside. I have 4 standoffs with the Frame but if theyre the right one I'm missing 2 screws because the others are tow long. Can anyone tell me how to mount them or where i find the right parts?
I can confirm that I need to install fc in another way. Screws are 12mm but should be 10. I put plastic washer to "inner" screws, to compensate 2mm, also I used 4 long screws from mamba fc, instead of frames the longest screws.
First off, I want to say thank you for this video, I am doing the basic budget build and it has been very helpful to watch this. I have one question, you talk about the rxsr reciever but then also a crossfire nano, are you using two receivers?
Thanks! No just one.
I'm complete noob, so sorry if this is a dumb question, but would it work with fullsize GoPro of similar knock off? I ussualy see it with GoPro session, so just wonder if there is enough power for extra few grams or would it messup balance of the drone?
Most definitely u can put 2 gopros on it and it will still fly with plenty of punch
Can I use a GoPro 7 on this
you sure can
What is that pen? Is that like flux in a pen? Where do you get that.?
Which battery should I use for the pro version
No coding?,transmitter?
This is a budget build and does not include the transmitter, goggles or battery. Betaflight setup video pinned in the comment below.
@@ViperFPV ok thank you
Much thanks for this build guide. I opted for the pro build but I'm running into an issue where all my motors are spinning CW. Any suggestions on how to fix this?
Derek Bradfield yes u will either need to swap to motor wires around on the two motors u want to spin the opposite way or you can change motor direction using Blhelisuite
Hi Viper_FPV, maybe a stupid question but in the build you are using screws and bolts etc. Any recommendations on supplies. Likewise wire. Cheers
Most of the hardware and wire all comes from the parts you purchase. Stack screws come with the stack, frame screws come with the frame, motor screws come with the motors. Xt60 comes with the FC stack...etc
Camera and antenna are currently out of stock. Do you have any alternatives. Thx
Antennas any mmcx right hand antenna will work. Regarding cameras any mini to full size camera will work. I would suggest the Caddx Ratel as a substitute
Thank you
good review and teaching methods would be nice to see the another review about ur budget pro build and how its perform
Thanks video on that being released Tomarrow
Can I use batter cable thickness 14awg? 12awg is hard to solder.
JS제이에스 you can but 12awg is reccomended for the battery leads
I just started watching this and i’m definitely gonna build it, does this include everything, like battery and program for it and how to do it and other things that an inexperienced fpv drone flyer would need?
what solder should i use and does it matter the type of solder iron and or wires
This is part 2 of a build series check out the playlist as after you build it u will need to program it which I have made a video on. You I have tons of tutorials to set everything up. 63/37 solder is my recommendation
Viper_FPV oh okay perfect thank you so much! great video, keep it up!!
Hey bud great video but I have a question, I don't want to build a drone so what kind of freestyle drone would you recommend that I buy, is there a kit that's ready to fly with the transmitter? I'm not really a beginner, I used to fly RC helicopters and I had A DJI mavic drone that I used to fly for years and a few others.
Are you using a micro camera or a mini? I can’t get my mini to fit...
I’m using a mini size. A micro should fit with the adapter that came with your camera.
Hello, thank you for the tutorial. We have a question : at minute 9, you are connecting the vtx connector and said to remove the black and red cable for the camera but you mentioned that you are not doing it but later in the video, the extra red and black wires are no longer visible. When , how and why did you remove them? This is our first build and we are following step by step and afraid of mistakes. Thanks in advance
same question here viper wgere dud the black and red wire go? thanks man
Hi there, now in 2021, would you suggest these similar parts with a different frame?
Updated parts are on my last video th-cam.com/video/F8XSEKlLm8A/w-d-xo.html
@@ViperFPV well then i suppose ill just have to subscribe for the updates 🤷🏻♂️🙌🏼
Wat battery and charger would you recommend for this build
For the pro build
Josh Milhench I would recommend the CNHL batteries and the ISDT charger or hota charger
Batteries bit.ly/2RqfcGV
Charger hota bit.ly/2kEAq8l
@@ViperFPV baybe a cheaper one ?:(
@@NavJack3078 you can find something that is cheaper but it normally will fall apart in a few months or requires other components like a power supply for the charger. Do your own research if you’re genuinely thinking of buying something, but that’s a pretty good charger and the batteries look like they’ll last you a long time (I know this is like 2 months but I thought I’d still respond 😆😅)
Does the set-up come with a reciever?
The 120 price does not since the receiver price depends on what kind of radio u are using.
@@ViperFPV Roger that, bought one for my FlySky, with total price for my drone at 155 euros. I already have fpv goggles.
@@ViperFPV Thanks. Do you know nay that works with the FlySky or a Turnigy 9X? I'm having trouble finding any...
Hi, I'm looking to build this drone but i am a complete beginner. after I have built, how will i view the camera in real time also how will i control it?
Email me and I can explain more.
Viper_FPV sure what’s your email?
@@roccorichards7005 viperfpvbusiness@gmail.com
Viper_FPV thanks I sent u an email
could i use a dsmx receiver with the mamba stack i have a dx6 and if yes what receiver would work thanks
Hello Viper! where did the Black and red wire on the VTX go? did you remove it?
I've built this quad with the pro version with the new emax eco II, it's an amazing quad, thanks for sharing your build! I wanted to know if anyone has built it, my motors get hot no matter what I do. I tried lowering the PIDs but they are still getting rather hot. Is this normal?
Can you define hot? Can you hold the motor for longer then 5 seconds without getting burned?
@@ViperFPV When I just ride casually, it gets pretty hot, but I don't get burned from holding it longer than 5 seconds. But when I fly real fast and snappy, it gets hot to the point where If I hold the motor for more than 5 seconds, it's uncomfortably hot, like I'd probably get burned for holding it too long. Thanks for the help by the way!
@@larkkane982 I wouldn’t consider that hot. Maybe warm, what is the ambient temp?
@@ViperFPV Around 25-30 Celsius or 77-86 Fahrenheit
bro can i use flysky i6x on that build and X6B transmitter? thanks for answering
Yes you can. As you can install any receiver on it.
@@ViperFPV thanks man! do you have a video that setting up flysky receiver on betaflight?
What type of Emax ECO Series motors are you using (1700KV, 1900KV, 2400KV)?
This build which was built for 4s 2400kv.
@@ViperFPV so 6s isn't possible?
Jack Tiebie 6s is fine if you use 1700kv
Is this build compatible with the taranis qx7? Sorry for the dumb question but i‘m just starting out with that whole fpv thing...
Jakobuwski yes just add a frsky receiver
Where do I plug the i-bus from receiver when Im already using TX3 from the vtx? can I plug the receiver to RX3 or not? Or am I stuck to the PPM pad? This is my first kwad. And Im a noob at this..
Næjla Jåma yes RX3 should be fine.
I am 75% done with this build. I did not see a receiver in your parts list. What receiver do I need to get? I’m using a Jumper T16 Pro Transmitter. Help please! I am ready to get her in the air!
You can use a xm+ or rxsr receiver.
Viper_FPV everything complete. But I just cannot get the ESC to send power to motors. No beeps when I plug battery in but all components powered up. Betaflight sees stick inputs, set arm switch. Can throttle the yellow lines for each motor up but motors nothing.
Elishah Gomez sounds like an esc issue, does it beep at all when plugged in?
Viper_FPV no. No beeps. And motor screws length are not too long, they are flush. It actually came out a super clean build so I’m stumped. Maybe a faulty ESC.
which mount mount can i use for my gopro camera.?
U want a option TPU one? Do u have a printer?
@@ViperFPV nope
I can’t screw the screws down on the esc in between the fc. Think it’s hitting the corner solder joints? Did you ever have this issue?
U mean your solder joints are in the way of the nuts? U may need to remove some solder if that’s the case
Viper_FPV a question the 2 main cables tge red and Black cables that go to the battery from where do i get them ?
Here is the link www.banggood.com/custlink/KGDGnbbWfP
sir what antenna do you use RP-SMA or SMA? Thank you somuch
Sma
@@ViperFPV thank you!
the nails come with the frame? or i need to buy them separetly
I cut my motor wires to short. What are my options now? Someone mentioned racewire?
Yes either solder long wires on, or use race wire
but ===the wire together and solder
Hi there, I have purchased all the parts for the pro build using your links. The areal is currently OOS, Are there alternatives. Also I have a Spectrum DX6 and a receiver. Can these be used and if so what if any changes are required? Likewise I have a Fatshark Dominator V3? Thanks for any advice. Cheers
Yes the spectrum can be used as long as it is using a small receiver. What is OOS?
Viper_FPV sorry for the shorthand. OOS is out of stock. Also the 2400 motors appear to be the same. Can I substitute the 1900 motors? Won’t be doing heavy freestyle yet as am a beginner.
Scott Trevena yes you can and u can always replace the motors later with a higher KV
This is the best bird get drone build I have seen, it’s cheaper then the rest but looks really good, I am a big ginger and hope I can buy the parts and build it with no problems.. I have a question, I am going with the base build and was wondering if I could use the pro builds motors on it? And also a different antenna?
NicoTheChico you sure can! Thank you!
Viper_FPV thank u sorry for all those weird auto corrects lol
Where can I find a xt60 already soldiered ?
Nice build! What kind of battery do you use?
CNHL 4s 1300-1500
m.banggood.com/CNHL-MiniStar-14_8V-1300mAh-4S-120C-Lipo-battery-XT60-Plug-for-RC-Drone-FPV-Racing-p-1352715.html?p=8G131435251262016013&custlinkid=363483
@ Viper_FPV Hey it seems I cant't tighten up the props. They are kinda loose on the motors even though the screws are tightened . Have bought the wrong ones? Wich are the right ones for the Emax Eco 2306 series? Hope someone can help.
What ones are you using?
@@ViperFPV problem solved turned out I was just too anxious to tighten the nuts strong enough. Did not want to break something. Thanks for your replys. You're doing great work
@@tastelessbrain4470 awesome!
what's the antenna 3d print file thx
There is none, it’s zip tied to the frame one zip tie in front of the sma and one behind the sma.
My fav frame😍good thing you build it using tis frame...cant wait to build mine
Btw can it fly in 5s n 6s?
Yes as long as you put 6s motors on it, you would need 1700ish kv motors for 6s
Viper_FPV nice thanks for reply....btw hve you test the top speed?how fast is it?
Yeo Yeong I don’t have a GPS or a speed gun on it. But I would estimate around 80 mph
Viper_FPV wow tats quite fast...thank again for reply keep up the great video
Do i need to purchase soft mounts separate? I've been watching builds and they mention installing the soft mounts. Im doing this build when my frame comes in! Very excited!
The Flight controller comes with them.
@@ViperFPV Thanks! Just waiting on the camera to come in, then Im going to start this build!
Love the Build but I'm having issues with the VTX/Camera. I have double, triple and quadruple checked my wiring and voltages. Betaflight is setup but i cant seem to get any video to my goggles. Any ideas?
Agrarian Spark are there any lights on the vtx? And when you mean no video do u mean static or black screen?
@@ViperFPV I get snowball static to start, when I power the quad it goes black static. One thing I also did last night was bypass the FC and connect the Camera to the VTX, that gave me video in my goggles and the foxxer OSD. So the Camera is working, but I cant seem to get the video to go through betaflight to the VTX. Based on that, do you thing the FC was DOA?
@@ViperFPV would the foxxer camera osd conflict with the Betaflight osd? Producing static?
Agrarian Spark no
What uart did we use to crossfire? Im binded but I'm not getting any inputs into betaflight. Do you have a betaflight setup for this build? Im using a Tango 2 with a crossfire nano receiver. I'm 8 hours in to checking everything and starting to get very discouraged. I've double and triple checked my rx is going to tx and tx is going to rx. Ive even switched them around to be extra sure. I'm not sure what is going on and nobody in any facebook group, discord, or forum is able to help.
I forget off hand but I do go into setup on here th-cam.com/video/dGh-MEcLm4I/w-d-xo.html
@@ViperFPV Thanks! I got everything working fine after watching this! Then, when I attached the top of the frame to the body, for some reason I ended up smoking my 4in1..... Unfortunately I can't get another one for a few weeks so back to the sim I go
@@Ghoustly oh my that stinks do u know what caused the issue?
@@ViperFPV Honestly I'm not sure at all... hopefully a new ESC will do the trick
Im looking at getting the emax ecos for this build will the 1900kv still work cause the 2400kvs are sold out?
Yes they still work but won’t have as much punch or power. Try getting the eco 2 motors if they have them in stock
Thanks for the quick reply! Was also curious how this drone would compare to something cheaper like a eachine tyro 99 im on a bit of a budget and the price is adding up very quick for this build and was wondering if its much difference for the price?
@@joshuascott4514 the tyro works but it’s using very old components so your experience may not be that great
how do you get rid of those oscillation?
Hey guys, im thinking about buying gaming pc or fpv drone. what would you recommend me to buy?
probably the gaming pc so you can eventually get a transmitter and play sims to get stick time.
can I use IBUS on this build?
Antoine Artigalas you sure can
@@ViperFPV thank you so much
will the Emax 2204 2300kv motors work for this build
Jim Reynolds yes they will, won’t have a lot of power but they will work
Where can you find information on how to build one, wire one up and any other info! Im still learning the lingo and have no idea what all the components even do. I am however a technician in a field that has given me experience soldering and performing lots of different types of wiring and electrical problems so i should be able to adapt pretty fast.
Watch lots of TH-cam videos lol
Is there a service to assembly this kit? I don’t know how to soldering small contacts. Is it necessary any programming after all? I want one this, but working. Do you recommend someone?
You can buy a bind and fly let me know and I can recommend some
Viper_FPV yes. For this first drone, I want to take one ready to enter in the world of drones racers.
Thanks for this video. I can't really afford a DJI mini and really want to learn how to build my own drone. My understanding is that an FPI will be a lot better than a DJI mini or even pro?
Can you confirm this?
how did you remove the 5v cam power wire from the vtx once it was already mounted? did you just cut it off?
Nic Nolan I pulled it out of the connector.
U have to get something tiny and bend up the plastic tab on the connector
Im new to fpv. Would like to do your build, but could I change the eachine tx with a frsky r xsr? Pros and cons?
Because I have already one and I heard its really good. (Btw: Own a Qx7... would there be problems to bind with the eachine?)
Isegrim No Kage hey! I think you are confusing the eachine TX? With a receiver. The eachine vtx is a video transmitter not a receiver so u would need to purchase a video transmitter eachine or whomever and then u also need a receiver which you can use the rxsr just fine. Any more questions let me know
Yes, my bad 🙈 just looked at your video description, and now after watching your video I saw you used a r xsr 😂👍🏻. But: You said you installed the crossfire reciever under the mamba stack, so youre using two recievers? Redundant (if thats the word)?
Isegrim No Kage I used a crossfire receiver but I included a link to a rxsr just in case anyone wanted to use that instead.
@@ViperFPV how exactly did you mount the receiver? i think i see electrical tape under there?
Alex Ellington I mounted mine under my esc but if u are using a rxsr I would just mount it with heat shrink over it and put it by the vtx
Update on my build... Just put a new ESC bottom in from the one I thought burnt out. Turns out that was not the problem. I replaced the 4in1 with a brand new one and plugged a fresh pack in. Beta flight is only recognizing my 6s as a 2s and the motors still wont spin. Im at a loss now and I simply can NOT get this thing to work.... I've done EVERYTHING by the book. Checked everything so many times and still Im at a loss... if anyone sees this who is willing to help me at all please, help
Okay, so I've watched this video over and over and looked in the description what is the TBS nano receiver? I am a complete newbie with this and I am very confused. Also along with that how does it work does the frsky hook up to a pair of goggles or do I need the other part to one of the receivers as well.
Nano receiver I used is for crossfire which is a 900mhz long range link. Frsky is another receiver but on the 2.4ghz band. Which one you use is up to you and your budget. I use crossfire because it does help with penetration with a lot of obstacles. But for a newer pilot frsky is great also. Frsky and crossfire are radio receivers ( controls the aircraft) The video transmitter is what will transmit the video to your goggles which uses the 5.8ghz band
@@ViperFPV Okay awesome thank you.
So if I were to buy everything that I would need to make this build I would need: Frame, ESC, FC, VTX, Antenna, Motors, Props, Transmitter and remote, and then a pair of goggles? Do I NEED the rapidfire?
@@timoty-pb3rs Unless you’re flying in really sketchy spots (to which I’d say a beginner shouldn’t anyway) or flying really really far away (which you also shouldn’t do without experience) I think you’re fine on not spending an extra hundred 👌
I just ordered all these parts, what’s the top speed??
Approx 60-70 depending on camera tilt
Viper_FPV niiice
@@ViperFPV km/h or m/h?
This is just an amazing build. I really want to get into this drone thing but my budget is limited. When you say $120 I would probably spend around $200 for some more tools and some parts I break in the process. But this looks really interesting.
Thanks, yeah there is a few odds and ends u will need extra like a receiver
@@ViperFPV and a battery
Can you make a flight Test Pleas nice Video
Yes I already did, flight video in the 3rd video in playlist.
th-cam.com/play/PL1_jqZcCfmwEdAeX2G3uS7hK6KUYBQzJA.html
Help I have martian 2 frame 2205 2600 kv motors suceex x4 mini stack and it's just not looking like it will work. What should I do now???
What won’t work?
@@ViperFPV how do mount the mini stack. Keep in mind I'm a total newb with no friends in the hobby
@@ViperFPV any answer on the mounting of the 20x20 stack on the Martian 2?
i have the fs- i6s transmitter would i be able to link it to this build? and how if you dont mind explaining?
Yes it’s comparable. you just need to make sure you use the receiver for your radio.
Your radio should of came with a extra receiver if not let me know and I will link a compatable one
@@ViperFPV i already used the one that came with the transmitter on my furibee x215 do i just buy another fs-ia6b
Just buy another receiver and bind it to your radio. If u need a recommendation just let me know
I built this exact drone! It’s very good so far but I haven’t gotten to fly it yet. If u want u can see me (a noob) build and get the drone into the air! (Plus a crash lol) I posted my video of this yesterday, thx for this build as it is my first ever quad! :)
What 6s battery would you recommend?
I do like these ones bit.ly/2Rsr4se
Have just received all the parts for this and started to put together. The frame comes in pieces so instead of removing the top plate I have to figure out assembly. That includes the insertion of the nuts in the carbon fiber. This was not straight forward and I stripped to screws and had to deal with the associated effort to remove. The stack was already assembled so I am not clear how to install stand offs etc. is there a reason for the difference. Btw, this is my second quad. I build the JB one while waiting for Banggood to deliver stuff. Cheers
Scott Trevena all frames come in peaces and there should of been included instructions
@@ViperFPV Sure, that makes sense, but your video does not start from that point. You take the top layer off etc. So for beginners it is a little bit of trial and error. I started and stopped, rewound and paused your video to try and make sense of it. I researched the carbon fiber nuts and some hammered and some screwed tight. I went the screw route and ended up stripping two of the hex bolts and having to buy tools to remove those etc. I am sure it will work out, just harder than I expected. Cheers
what solder you use?
63/37 solder
@@ViperFPV ok
Alright I'm going to attempt it. Have any recommendations for different motors though? Or should I just find any 2400Kv motors? Banggood only has three of the ones above in the US, and it's totally grayed out when switching to China.
Email me and I’ll send u some reccomendations
The link provided for the antenna you used is currently out of stock, do you have another that you recommend?
These should be a good alternative
www.banggood.com/custlink/DmGKAB4jRR
got the pro coming in the mail now! but im using a Frsky xm+ in it and that has to be wired different am i not mistaken?
Jayden Lamb yes it is, if I remember right I believe I explain how to wire that up in the video. Sbus, 5v and ground
@@ViperFPV awesome I thought so thankyou for clearing that up :) better to be safe than sorry haha
What will be the range and flight time for this ?
Fpv racing and freestyle drones have approx flight times anywhere from 3-5 min depending on how hard you fly ( a lot of tricks and punch outs)
@@ViperFPV I want to get started with my first build, I want something that can fly far and for around 20 min, any build videos you can recommend ? I have a lot of range problems with my mavic air (ps: thanks for the reply)
Is there going to be a flight video? Great build, might have to make this one!
Hayden M. It’s in the video description
@@ViperFPV Didn't even think to look, whoops... Thanks!
Can I usw my GoPro 8?
Yes
Hi, please help, I just built the drone based off your video with the FrSky XM Plus Mini Receiver and I have it bound to my transmitter... However when I go to plug the drone into betaflight the drone pops up but the transmitter does not. I have a battery plugged into the drone and the green light is on on the receiver saying it is bound to the transmitter... I cannot get the transmitter to hook up to betaflight. It is a taranis x9lite, and I have downloaded the firmware with d16 already. Please help as I cannot get the drone to fly without the transmitter connecting to Betaflight. It says RX_FAILSAFE and MSP for the flags. I am confused why the receiver says no connection when the green light is on saying it is bound.
Also might be important to note when I plug in the battery my motors move a little bit and the board beeps 3 times but that is it... When I try to move them in betaflight with the sliders or with my transmitter nothing happens.
That is normal for it to beep and the motors to move when u first hook up the battery. Did you setup the configuration for the receiver in the configuration tab of betaflight?
Viper_FPV yes, I set up serial rx to the correct uart and the transmitter is bound, but won’t pop up on beta flight and acknowledge the transmitter...
Jamie.arquit when u say uart do you have the frsky receiver wired to the sbus pad?
Viper_FPV yes, it’s wired to Sbus pad
What happens if you fly out of range? Would it keep flying the same way it was till the battery dies?
Noah Lakes that’s why you setup failsafe as cut so it will drop out of the sky.
Ok thank you... I’m new to flying fpv and trying to figure all this out. Thanks for making this video I’m gonna order the parts to build this
Noah Lakes awesome! You will love it
So I just finished this build and on startup, before syncing to a controller or anything 1 of my motors stutters and spins on its own and ends up heating up if I leave it long enough! I have no idea what could be causing this or how to fix it :(
Check you solder connections to the esc make sure there are no shorts. Also check your bolts on the bottom of the motor and make sure they are not touching the windings. Let me know
So I've checked everything from that motor and all seems fine, I've double checked with the voltmeter in continuity and doesnt seem to be anything shorting as far as I can tell but I'm no expert! Windings are all good I've backed the screws out just to double check. The only thing is I haven't added a receiver yet as I didn't realise this was separate to the VTX :/ I'm stumped
@@seanboe7198 any updates man?
@@seanboe7198 How'd it go?
what are the cheapest goggles and controllers would you recommend that aren't absolute crap?
The QX7 is a favorite and Fatshark goggles either the attitude line or HD line to save some money
Will the 1900kv work? Cause that’s what I got haha
Yes they will
Frame HSKRC VO235 5 inch Frame Good!)) I would replace the engines with EMAX ECO II with the installation of "soft-toch" under them, treat the contact soldering pads with Sealant 704. The receiver, for example, is a full-range Frsky XM ("Long-range" at the initial stage need not). It is easier to "link" them before setting them to Frame. CADDX Turbo EOS2 camera - for example. The VTX power supply must be blown through a separate connector, it allows you to turn OFF the TRANSMITTER during service. I'm waiting for the RPM setup video. Can you customize RPM in the simulator? to compare the quality of CONTROL ??. Thank you very much for the video.))
Yes I’m making an update 2.0 with the emax eco 2 motors. Thank you
Can I fly 6s with the 2400kv motors ?
Yeah as long as your esc is rated for 6s and it has a high amp cap.
th-cam.com/video/SPWuijhiEPg/w-d-xo.html
@@ViperFPV what do you mean with cap. ?
wout schouten like your esc is rated up to 50 amps or 60 amps
anyone know how fast you would expect this thing to fly?
Approx 60-80 mph
Thanks
be carful with that threadlocker it gets on a standoff bolt and it’s over...i stopped using threadlocker and treat my quad like a old harley and tighten my screws after ever flight....but yes i like this budget build ......good job
This is what I don't get about the thread locker on quads. I club race motorcycles and we don't use loctite/thread locker on consumable hardware. We do a pre and post check on all hardware when we race. Nice to see another 2 wheel brother that understands this lol
Definitely feel like a few of those 'pro' changes are actually mandatory changes.
Racerstar35Anniversary/RCharlanceF4Pro2/RCX NK2306.5 on that frame with an XM+ is going to outperform everything there for less money.
I have the mamba stack on 2 rigs which fly amazing sorry your experience was not that great.
@@ViperFPV Got to help with a fairly big project where we build a couple dozen quads on that that hardware - statistically significant failure rate. Not that Racerstar stuff is typically much better... but that particular ESC is a good design, and RCX motors are a great value.
Definitely appreciate you bringing that frame to my attention - I'll probably add a couple to my beater fleet.
can this flight controller use ibus
LASAGNA BEATS yes it can
@@ViperFPV can you do a video on the ibus because I know no electrical engineering or circuitry