Awesome as usual thanks Graham. We installed the same lock box upside down as i think the dust cover could vibrate loose and hang down on the corro. ZPP72
I like your improvements Graham, thank you for sharing. I've fitted a Blackjack to our 18.6 BASE. I have the wiring loom and switch that you've used in this video and plan to wire it like yours. Where did you connect the negative wire in your loom? Also, I'm planning on adding an Anderson plug under the area of the tunnel boot to power our 45 litre fridge when camped up. I put the fridge under the van. Any ideas where to pick up a power lead from the BASE?
Hi Stephen, good to hear from you, I’m presuming you have the same Enerdrive Power Board system as mine. On the video where I added the additional fuse under the seat, you will find the neutral bar next to the existing fuses, plenty of spare terminals to connect too..just unclip the clear plastic cover by squeezing the ends in to access the Silver bar. For your additional Anderson Plug for the fridge, you could add another circuit where I have added the Black Jack circuit in the same way and run a “8 B&S “ cable through the chassis channel with the Black Jack circuit, fit a separate 30amp fuse for cable protection. Don’t forget to make good tight connections and label everything for future reference. Hope that helps, any more questions, just send me another message. Cheers Graham
@@grahambelby9117 Yes Graham, the same Enerdrive power Board system. Thanks heaps for the help. Very much appreciated. Looking forward to your next videos. Take care. Cheers Steve.
@@grahambelby9117 Hi Graham, I've only just gotten around to finding the time to wire in the Blackjack as per your video. About to start. Am kitted up to do the Anderson plug for the fridge as well. Yes, my Enerdrive Power Board is the same as yours with the same 400Ah Enerdrive lithium battery system. How did you access the space under the chargers to check the exact location for the holesaw and to pull and run the wires to exit between the panels? Did you remove the batteries or remove the charger (assuming there is a cut out in the mounting board underneath it)? Appreciate the help. Thank you.
Awesome as usual thanks Graham. We installed the same lock box upside down as i think the dust cover could vibrate loose and hang down on the corro. ZPP72
That’s a good point, didn’t think about that.
Glad you’re enjoying our vids. Cheers Graham
Thanks. Some great ideas for any van.
Yes, there certainly is lots of good products out there to improve most RV’s, glad you enjoyed our Vid and thanks for your comments.
Great ideas & improvements, thanks for sharing 🥰
You are so welcome! Cheers Graham
Love your tips n tricks thank you
That’s great, we like sharing.
Great tips thanks.
Your welcome, thanks
Awesome knowledge as usual never boring❤
Thank you very much, glad you enjoy our vids.
I like your improvements Graham, thank you for sharing. I've fitted a Blackjack to our 18.6 BASE. I have the wiring loom and switch that you've used in this video and plan to wire it like yours. Where did you connect the negative wire in your loom? Also, I'm planning on adding an Anderson plug under the area of the tunnel boot to power our 45 litre fridge when camped up. I put the fridge under the van. Any ideas where to pick up a power lead from the BASE?
Hi Stephen, good to hear from you, I’m presuming you have the same Enerdrive Power Board system as mine. On the video where I added the additional fuse under the seat, you will find the neutral bar next to the existing fuses, plenty of spare terminals to connect too..just unclip the clear plastic cover by squeezing the ends in to access the Silver bar.
For your additional Anderson Plug for the fridge, you could add another circuit where I have added the Black Jack circuit in the same way and run a “8 B&S “ cable through the chassis channel with the Black Jack circuit, fit a separate 30amp fuse for cable protection. Don’t forget to make good tight connections and label everything for future reference.
Hope that helps, any more questions, just send me another message. Cheers Graham
@@grahambelby9117 Yes Graham, the same Enerdrive power Board system. Thanks heaps for the help. Very much appreciated. Looking forward to your next videos. Take care. Cheers Steve.
@@grahambelby9117 Hi Graham, I've only just gotten around to finding the time to wire in the Blackjack as per your video. About to start. Am kitted up to do the Anderson plug for the fridge as well. Yes, my Enerdrive Power Board is the same as yours with the same 400Ah Enerdrive lithium battery system. How did you access the space under the chargers to check the exact location for the holesaw and to pull and run the wires to exit between the panels? Did you remove the batteries or remove the charger (assuming there is a cut out in the mounting board underneath it)? Appreciate the help. Thank you.
@@stephenboag9830
Hi Stephen, just checking you received my reply
@@grahambelby9117 Hi Graham. No, I didn't receive your reply.
Thanks for the tip on the seats ours are short as well time for new ones
Yes, they certainly needed improvement.
Nice work guys
Thanks, glad you enjoyed it.