I have a 2018 model from Walmart. When I put the switch to English. He plays a full set in English and then goes right into Spanish. Do you have any idea how to fix this problem?
I have a question for you I have a 5 foot 8 African-American animatronic doll I accidentally put the wrong plug to the voltage is the wrong voltage and I'm wondering is there anyway to replace that or what will I need to do so I think I blew something
I have a life size Santa and he's only 2 years old,he dances,moves his mouth but doesn't sing,I tried some things on your video but I couldn't find anything wrong,checked the wires etc,can you help me please thank you
I just bought this EXACT same model online. his mouth doesnt work, and his motor os VERY loud. hopefully this video can help me fix it. Do you know why the motor may be very loud?
I have the 2004 5 foot grinch stole Christmas dancing animated and while his head is on the song won’t complete and when his head off, it plays all the way through. Do you know what it could be??
Hi will you be able to assist me in getting my Santa working aga8n please, one of the Transistors burned on the circuit board and I am unable to identify it. I will be able to send yo7 some pictures the Transistor is the one that is on Q3 on the circuit board if you can send me the the info on the Transistor please will be a big help.
Hello? Gemmy Master Animatronics? I have a melting snowman that I bought off of eBay, and the rising mechanic is busted. He only goes up half the way. I was wondering if you could maybe fix him?
it some knock off and realistic beards version, under the beard is a mold of the original beard have been covered by the realistic beard. but sometime it's noticeable.
Hi! Where are you located? I’m so sad my 5ft Gemmy santa stopped singing :( I followed your trouble shooting Pulled off plate under his feet, and hoped it was a button contact issue….bc all the other components looked perfectly in tact. Ps this model is atleast 2002-6 Ours sings wish you a merry xmas so original model. There was rust on the bottom and contact ps22 plate so I cleaned it all and hoped for a Xmas miracle and no :( He didn’t sing. It’s like he’s not sensing and only dances on Aux mode On on mode he does nothing :( His speaker is on his body Anyway if you have any advice for me I’d super welcome it! Grateful for your videos. Ps I know he’s an old original lol but he’s worth saving!!!!!
Try and short the button wires with a screw driver, the way it works is the button completes a circut when pressed down, if you short them with a screwdriver it bypasses the plate and that could make him work, if this does work then get some CRC Quick drying contact cleaner and spray it on the button and the PCB for the button. Hope this helps!
Black and the white wires on the control board on the base are loose . Assuming they supply power to the head. Where does the white wire connect on the board
I was just given a 2003 model for free but it's having an issue which I believe is relation to the main circuit board. When I press the red button the mouth opens and closes and I hear crackling noises from the speaker, his body twitches a little bit but he won't sing or dance. I grabbed a hair dryer for the hell of it and blew it at the circuit board and he surprisingly came to life again dancing, singing head and mouth worked! Unfortunately it was short lived once I got him back together he was back to the same problem twitching, crackle from speaker and mouth opening and closing that's it. When I set the switch to mic/aux and connect an mp3 player I hear music from the speaker and his mouth opens and closes to the music I assume he's supposed to dance as well when he's set to aux/mic. What can I do?
We are looking for replacement belts for our dancing Santa (that doesn’t dance). Where do we order it from and what do we specify we are looking for? Thanks! Sonya
Thanks! We purchased O rings and replaced the one that was there (still intact). Gears appear fine. But still isn’t dancing any other suggestions to try? Also, mouth stopped working (has power, and closes when turned off, but will not move to the music). Thanks! Sonya
@@animatedchristmascollector3754 yeah lol... I have 12 months to try and work him out. Fingers crossed for next year. Thanks for checking up on me lol 👍
Hi - please let me know the amperage output of the 6 volt power supply. We have a salvaged 4 foot Gemmy animatronic Santa that is apparently from 2002-2004, based on what we've found in searches thus far. The base's power connection port shows DC6V. I think the speaker is in the base due to the circular pattern of holes behind the manual play button, which I think can help identify the model year, right? We ordered a 6 volt, 2 amp power supply off Amazon, but have now found your repair video, so hope you can tell us the OEM adapter output amperage for the 6 volt power supply adapter. Thank you.
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
A question why does your Santa Claus dance faster when he does not move his mouth and when he moves it slows down 14:55
I have a 2018 model from Walmart. When I put the switch to English. He plays a full set in English and then goes right into Spanish. Do you have any idea how to fix this problem?
I can’t get mine to sing in Spanish at all when I switch it over. 😢
I have a question for you I have a 5 foot 8 African-American animatronic doll I accidentally put the wrong plug to the voltage is the wrong voltage and I'm wondering is there anyway to replace that or what will I need to do so I think I blew something
I have a life size Santa and he's only 2 years old,he dances,moves his mouth but doesn't sing,I tried some things on your video but I couldn't find anything wrong,checked the wires etc,can you help me please thank you
I just bought this EXACT same model online. his mouth doesnt work, and his motor os VERY loud. hopefully this video can help me fix it. Do you know why the motor may be very loud?
I have the 2004 5 foot grinch stole Christmas dancing animated and while his head is on the song won’t complete and when his head off, it plays all the way through. Do you know what it could be??
Hi will you be able to assist me in getting my Santa working aga8n please, one of the Transistors burned on the circuit board and I am unable to identify it. I will be able to send yo7 some pictures the Transistor is the one that is on Q3 on the circuit board if you can send me the the info on the Transistor please will be a big help.
Hello? Gemmy Master Animatronics? I have a melting snowman that I bought off of eBay, and the rising mechanic is busted. He only goes up half the way. I was wondering if you could maybe fix him?
Do you have a video of how to replace a base? Mine is cracked on the top of base by the button in the front & it’s also cracked in the back.
I think this is my favorite version of the life size dancing Santa.
it some knock off and realistic beards version, under the beard is a mold of the original beard have been covered by the realistic beard. but sometime it's noticeable.
How did you get the head off? You have a couple videos and none of them show that
Do you know what size O ring the 9 volt uses?
Why the 2002 one dance slow when the mouth is moving
Hi! Where are you located? I’m so sad my 5ft Gemmy santa stopped singing :(
I followed your trouble shooting
Pulled off plate under his feet, and hoped it was a button contact issue….bc all the other components looked perfectly in tact. Ps this model is atleast 2002-6 Ours sings wish you a merry xmas so original model. There was rust on the bottom and contact ps22 plate so I cleaned it all and hoped for a Xmas miracle and no :(
He didn’t sing. It’s like he’s not sensing and only dances on Aux mode
On on mode he does nothing :(
His speaker is on his body
Anyway if you have any advice for me I’d super welcome it! Grateful for your videos.
Ps I know he’s an old original lol but he’s worth saving!!!!!
Try and short the button wires with a screw driver, the way it works is the button completes a circut when pressed down, if you short them with a screwdriver it bypasses the plate and that could make him work, if this does work then get some CRC Quick drying contact cleaner and spray it on the button and the PCB for the button. Hope this helps!
Black and the white wires on the control board on the base are loose . Assuming they supply power to the head. Where does the white wire connect on the board
How do you make it not- noisy?
This model you cant, that's just how it is. I believe it's something with the gear ratio.
@@gemmymasteranimatronics768 Alright, thx
I have the 4ft one that sings santa claus is coming to town.
The one that sings santa claus is commin to town can RIP the audio from a video and upload that song from the santa into HQ?
Idk how to do that
You still have him?
Wow! I didn't know Santa had an identical twin! You can't even tell! Yay, free Clause concert!!
I was just given a 2003 model for free but it's having an issue which I believe is relation to the main circuit board. When I press the red button the mouth opens and closes and I hear crackling noises from the speaker, his body twitches a little bit but he won't sing or dance. I grabbed a hair dryer for the hell of it and blew it at the circuit board and he surprisingly came to life again dancing, singing head and mouth worked! Unfortunately it was short lived once I got him back together he was back to the same problem twitching, crackle from speaker and mouth opening and closing that's it. When I set the switch to mic/aux and connect an mp3 player I hear music from the speaker and his mouth opens and closes to the music I assume he's supposed to dance as well when he's set to aux/mic. What can I do?
He does not dance to the mp3 only normal mode
Cute
Good job with the repair as always jordan there’s a 2002 one that dances normal on eBay nib for 300$
RYYYAN BB yes you should
I am repairing one right now and wondering where you can get the gears?
Mouth and head not turning not working??
Yes they are, but as of now, the head gearbox shattered again because of the yellowing.
Help! I need mine fixed
Why?
I really need a new motor for the mouth. You got one, or know where I an get one?
@@TheGemmyRepairGuy. Can you tell what the motor called so I know which one to buy please?
Wow!!!!!!
We are looking for replacement belts for our dancing Santa (that doesn’t dance).
Where do we order it from and what do we specify we are looking for? Thanks! Sonya
I don't know the size, but I get them from ace hardware, they are usually called o rings, they are used for plumbing.
Thanks! We purchased O rings and replaced the one that was there (still intact). Gears appear fine. But still isn’t dancing any other suggestions to try? Also, mouth stopped working (has power, and closes when turned off, but will not move to the music). Thanks! Sonya
Great stuff, my issue now is the song plays for a little bit then cuts out, it's making me nuts 🤯
That's because I took the clips through messenger which gives 20 seconds lol, it was just showing the repair process, at the end I show all the songs
I have this Santa, and I can't get him to pop up, any suggestions pleeeeassse?
Is he fixed?
@@animatedchristmascollector3754
Sadly no... I became so frustrated, I packed him away till next year lol
Oh lol you might need to get into him next time year maybe his springs are lose idk
@@animatedchristmascollector3754 yeah lol... I have 12 months to try and work him out.
Fingers crossed for next year.
Thanks for checking up on me lol 👍
Hi - please let me know the amperage output of the 6 volt power supply. We have a salvaged 4 foot Gemmy animatronic Santa that is apparently from 2002-2004, based on what we've found in searches thus far. The base's power connection port shows DC6V. I think the speaker is in the base due to the circular pattern of holes behind the manual play button, which I think can help identify the model year, right? We ordered a 6 volt, 2 amp power supply off Amazon, but have now found your repair video, so hope you can tell us the OEM adapter output amperage for the 6 volt power supply adapter. Thank you.