Building a carport

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ส.ค. 2024
  • Building a carport from scratch.

ความคิดเห็น • 34

  • @kule510
    @kule510 7 หลายเดือนก่อน +5

    Came out really good!

  • @justinalexander1152
    @justinalexander1152 5 หลายเดือนก่อน +4

    That is a solid carport that thing will last! Solid build

    • @miroslavb5653
      @miroslavb5653  5 หลายเดือนก่อน

      Thank you ✌️

  • @gregoryrittling
    @gregoryrittling 18 วันที่ผ่านมา

    Love to get the plans if available
    thx

  • @scarecrow1490
    @scarecrow1490 13 วันที่ผ่านมา

    I'm curious how the columns are fastened to the concrete.

    • @miroslavb5653
      @miroslavb5653  13 วันที่ผ่านมา +1

      threaded rod with a diameter of 24 mm and a length of approx. 40cm in concrete

    • @scarecrow1490
      @scarecrow1490 13 วันที่ผ่านมา

      @miroslavb5653 nice. Is there a plate the wood sits on?

    • @miroslavb5653
      @miroslavb5653  13 วันที่ผ่านมา

      @@scarecrow1490 I welded the nut to an iron plate with a hole drilled in the middle, which I then screwed to the columns with 4 screws.. a hole approx. 25 cm long was drilled into the columns and the columns were only screwed onto the threaded rods

  • @Mike-zn7vj
    @Mike-zn7vj 6 หลายเดือนก่อน +2

    What was the total price ?

    • @miroslavb5653
      @miroslavb5653  6 หลายเดือนก่อน +1

      search in the comments 😉

  • @RamxRamx-fw3gm
    @RamxRamx-fw3gm ปีที่แล้ว

    But what is the pitch for though? Looks? Cause it doesn’t give you more room

  • @melainelee
    @melainelee 4 หลายเดือนก่อน +1

    do you have the plans?

  • @TqmmPl
    @TqmmPl ปีที่แล้ว +1

    Hello,
    what is the thickness of column?

    • @miroslavb5653
      @miroslavb5653  ปีที่แล้ว +1

      Column 170x170, battleship + stiffener 170x170 too, rafters 80x170..
      I live in an area where it snows a lot ;)

    • @TqmmPl
      @TqmmPl ปีที่แล้ว +1

      @@miroslavb5653 Thank you very much! I'm closer to BA, so less snow, but "by design" I would need carport for 2 cars
      where it would be possible to "pass through" :D

  • @sunwillcomeup
    @sunwillcomeup ปีที่แล้ว +2

    Total cost/investment?

    • @miroslavb5653
      @miroslavb5653  ปีที่แล้ว +4

      Base plate - road concrete + surface finish "polished concrete" €1600, wood €1000 + cutting €400 + underlaying, tongue groove €650, paint €250, roof + gutter system €1000, connecting material €150 waste pipes + waste channel €250 , other accessories such as roof foil, feet, threaded rods €300.... I must have forgotten something, but the total is about €6,000

    • @miroslavb5653
      @miroslavb5653  ปีที่แล้ว +1

      but today everything is much more expensive, I estimate around €9,000-10,000

    • @sunwillcomeup
      @sunwillcomeup ปีที่แล้ว

      @@miroslavb5653 TY!!!

  • @JoseMedina-jb2mp
    @JoseMedina-jb2mp 2 หลายเดือนก่อน

    What size is the carport

    • @miroslavb5653
      @miroslavb5653  2 หลายเดือนก่อน +1

      Roof = 6,8x7,2m

  • @glazrud7062
    @glazrud7062 ปีที่แล้ว +1

    Hello. what is the width of the entrance to the carport?? I want build te same carport.

    • @miroslavb5653
      @miroslavb5653  ปีที่แล้ว +2

      Hi, the width of the shelter/entrance is also 6m, which is good because when the children get out of the car, the door does not hit against second car

    • @glazrud7062
      @glazrud7062 ปีที่แล้ว

      @@miroslavb5653 thanks for yours answer. Good joob!!

    • @vasylpetrov2010
      @vasylpetrov2010 ปีที่แล้ว

      Hello. what is the size of the wooden pole?

    • @miroslavb5653
      @miroslavb5653  ปีที่แล้ว

      @@vasylpetrov2010 Column 170x170, battleship + stiffener 170x170 too, rafters 80x170..

    • @JdMultiservices
      @JdMultiservices ปีที่แล้ว

      What type of wood did you use?

  • @xquakexx
    @xquakexx 8 หลายเดือนก่อน

    looks dumb/unfinished

    • @berenikeb.6668
      @berenikeb.6668 6 หลายเดือนก่อน +1

      can you do a better one? :) Go ahead, show us.

    • @xquakexx
      @xquakexx 4 หลายเดือนก่อน

      @@berenikeb.6668 Did you make me a sandwich yet? I'm almost done with my MODERN one that would make your worship me. Nice 666 in your name (not)

  • @matthiaschristl4877
    @matthiaschristl4877 5 หลายเดือนก่อน +1

    Hello,
    which wood stain did you use? color and brand? looks great.

    • @miroslavb5653
      @miroslavb5653  5 หลายเดือนก่อน

      hi, I used the HET soldecol stain - color “teak”