Although the winding method is good, making damaging blows on the edges of the coil with an iron hammer and iron plate is not a correct practice in the workmanship. It is necessary to use a rubber hammer and a non-ferrous fiber type pressure plate. Otherwise, the insulating enamel of the coils is scratched and damaged. I hope our friendly warning for a healthy workmanship will be taken into consideration. ****** Sargı yöntemi güzel de bobin kenarlarının üzerine demir çekiç ve demir levhayla sindirici vuruşlar yapılması, yapılan işçilikte hiç de doğru bir alışkanlık olmuyor. Lastik çekiç ve demir olmayan fiber türü bir baskı levhası kullanılması gerekir. Diğer türlü bobinlerin yalıtkan emayesi çizilip zedeleniyor. Umarım sağlıklı bir işçilik için yapılan dostane uyarımız dikkate alınır.
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
ชอบมากเลยครับ...💯❤️💯กำลังเรียนรู้กับสิ่งนี้อยู่ครับขอบคุณ..🙏🇹🇭🇹🇭🇹🇭🇹🇭🙏...
สวัสดีปีใหม่ค่ะ มารับชมการพันฟิลไดชาร์จด้วยค่ะ เยี่ยมมากค่ะ 12:50 🎊🎊🎉🎉🎈🎈
ขอบคุณที่แวะเยี่ยมชมให้กำลังใจค่ะ❤️❤️❤️🙏🙏
Good idea in how to make rewinding stator coil winding, im ckick this channel watching from bacolod city philippines
งานฝีมือจริงๆเลยค่ะ👍👍
ขอบคุณค่ะ❤❤
Good working 😊
Thanks so ❤️🙏
สวัสดีครับมาให้กำลังใจรับชมการพันฟิลไดชาร์จเก่งมากเลยครับผม😮😊❤🎉
สวัสดีค่ะ ยินดีที่ได้รู้จักค่ะ❤️
❤6🙏สวัสดีครับ วันนี้ตามมาสนับสนุนให้กำลังใจกันก่อนนะครับ ตามกลับภายในสามวันครับ เก่งมากๆเลยครับงานฝีมือดีครับสนับสนุนครับ💯💖💗💓🌹 12:50
ขอบพระคุณมากค่ะ🥰🙏🙏
Top😮
Thank you 🙏 😍
สวัสดีครับมาชมด้วยครับ ไม่เคยเห็นการทำงานแบบนี้ครับขอบคุณที่นำเสนอ
ยินดีค่ะ ขอบคุณที่แวะมาเยี่ยมชมให้กำลังใจค่ะ🥰🙏🙏
Nggak jauh beda ya om, salam nyepul tangan 😊😊😊
❤️❤️❤️
❤❤❤❤❤❤
ขอบคุณค่ะ🙏
👍👍👍
❤️🙏🙏🙏
Top
@@VicenteSilvadesiqueira-vw1bm thanks so 💕🙏🙏
สุดยอดจริงๆค่ะคนนี้ต้องมอบให้เลยงานฝีมือยอดเยี่ยมมากๆค่ะ❤
ขอบพระคุณมากค่ะ💕💕💕🙏🙏
Where you from....?
I come from Thailand thanks ❤️🙏🙏
I am Transformer winder. Your name ...? Plz.
@@bhupindersingh9677 My name is Da.
Although the winding method is good, making damaging blows on the edges of the coil with an iron hammer and iron plate is not a correct practice in the workmanship. It is necessary to use a rubber hammer and a non-ferrous fiber type pressure plate. Otherwise, the insulating enamel of the coils is scratched and damaged. I hope our friendly warning for a healthy workmanship will be taken into consideration.
******
Sargı yöntemi güzel de bobin kenarlarının üzerine demir çekiç ve demir levhayla sindirici vuruşlar yapılması, yapılan işçilikte hiç de doğru bir alışkanlık olmuyor. Lastik çekiç ve demir olmayan fiber türü bir baskı levhası kullanılması gerekir. Diğer türlü bobinlerin yalıtkan emayesi çizilip zedeleniyor. Umarım sağlıklı bir işçilik için yapılan dostane uyarımız dikkate alınır.
🙏🙏🥰🥰