ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Measure nothing, cut twice. That sounds about right for the work we've done this video. Lets just say every mistake is a lesson learned....boy did we learn a lot...
In this episode we build a custom fusebox to fit around the rollcage , custom wiring and we start reinstalling the interior components with some slight modifications
So, what type of wing should we put on this thing?
Depends on the front splitter size, but either Mtech or Big wang
custom one, with DRS
@@r3do781vulcan alpha wing👍🏽
One with active aero👍🏽
@@GRAUSLICK contact Misha of Vulcan Alpha, he is busy to bring out his own wing. See his videos if you haven’t done it yet😅
My new favorite build on YT. 👍👍
Hell yeah, glad you enjoyed it!
Bro how are they in just 3k subs
The quality of videos and build is just amazing and would say even better than well known youtoubers
Apreciate the kind words bro ✌️, we're just 2 guys that started a YT channel a few months ago, so honestly we're quite clueless to all of this. We just have 1 rule and that is to make stuff we find fun ourselves, bad humour and all 😅😅🫡
One of this videos will eventually blow . Keep it up incredible videos
Really apreciate it man ❤️, we'll see!
I like the boardroom, it looks like a good place to get drunk and think of something stupid for the car. 🍺
Scanning the dashboard to get it to fit perfectly was insane for me. Now, making a new fuse box for the rollcage is awesome. Great job guys, awesome.
Usually when we do something here, it usually involves a cutting disc, welding and spray paint, and the Russian song "Trust me, I'm an engineer"🧑🔧🧑🔧
G the boardroom has gotten its fair share of usage 😅😅😅.
And as you can see, my first thought was also the cutting disc....old habbits 🤣🤣🤣. But.....we are evolving...sometimes.😅
@@GRAUSLICK It really was very good, OEM level.
I'm thinking about learning how to use these new tools, 3D scan, 3D printer, but it's at another level of learning, and probably if I learn how to use this, I'll definitely lose control and want to do everything. lol
Fair play the attention to detail on this is top notch.
Thanks mate, apreciate it!
'Technically it's not my fault' - the guy who is 100% at fault, always xD
Jokes aside, the build quality, attention to detail and video quality are awesome! Can't wait to see the car on track at some point (unless you do another oil change that escalates slightly).
Bro woke up and choice violence 🤣, it wasnt my fault.
Sometimes maybe good, sometimes mabye shit. Thats just how it is.
Thanks for watching 🤟
The attention to detail for a track car is insane and I absolutely love it.
It's called mis-managing time and resources 😁😁, and we're really good at it 🫡
Really enjoy the content!
The scanner, cad and the results is always fun to watch. Fuse box looks great!
I ended up grabbing the same scanner thanks to the content you guys shared.
Thank you
No man, thank you 🫡. All the comments. Involvement and feedback is why we make these videos. Out of curiousity, what are you gonna use the scanner for?
@@GRAUSLICKmainly for product development when I have time 😅 and just providing my customers with a product that fits close to perfect.
My first project with it is going to build a cage in an s15. I normally just bend and notch myself, but I figured since I have the scanner I would challenge myself and try to build the whole cage in cad. I need to spend some more time in solidworks, but doesn’t seem that challenging regardless.
@@GRAUSLICKi already own a mk5 Supra, you guys are making me want to buy an E36 to build 😂😂😂 BMW problems are scary!
@@Centerlinemsoh wow, modeling the entire cage would be next level...however you can archieve next level fitment that way....maybe if you can find a company with a 3D tube bender/laser you can do the entire cage that way. That would be insane
@@djes.36 I have a buddy that has a tube cutter and bender, but I feel if I can just get it cut/pre notched, bend lines marked and I bend it myself it would be fine.
I know the first time doing it will take a ton more time compared to building it how I normally do.
Nice work with the fuse box 👍👍👍
Gracias!!! 🫡🫡🫡
heel mooi gedaan leuk om te zien wat jullie allemaal mogen doen in nederland aan jullie autos, belgie is een ander verhaal
Succes met de build ik zal die zeker mee volgen!
Nouwjah...."mag".....het is makkelijker om vergevenis te vragen dan toestemming 😂😂😂.
Nice project and good work - thanks for sharing this journey!
No , thank YOU for following the build 😄😄
Yet another episode of enjoyment!
I'm thinkin about buying a 3d scanner now and learning how to model.
By the way, I don't know if you know. Since you really wanna tidy things up with the cage, some people use rubber gromets on the dashboard to seal the hole with the cage and the dash.
Thought it might be useful. Already waiting on next weeks video! 🤩
Modeling is quite fun! We use Fusion 360, tons of free tutorials out there and its free for personal use wink wink. I'm hoping to get away without grommets or anything, but we'll keep that in mind in case we f up 😆
Misschien ben ik de enige, maar vindt het jammer dat de video’s meestal maar 15 tot 20 min duren, zou 30/45 min echt ideaal vinden, voor de rest echt top content❤️
Moet zeggen dat we nooit bewust een bepaalde lengte hebben gekozen, we maken de videos aan de hand van wat we hebben gefilmd, en editen dat zondanig dat het een goed tempo heeft , niet te snel, niet te langdradig. En als de content op is dan is de video af 😅😅. Dus opzich zouden we ze wel langer willen maken, maar dat redden we niet echt kwa tijd. Of alles wordt een stuk "langzamer" / langdradiger.
Ik denk dat dit een betere manier van filmpjes maken is. Op deze manier forceer je niets! Geniet van de build🤙 @@GRAUSLICK
Absolutely sick build! My kinda content! Love it!
Thanks man! 😁😁
Great video as always
See ya at the next one 🫡🫡🫡
Well done boys, as always. This car is going to be so perfect.
Appreciate it mate, just dont look too closely 🤣🤣🤣
@@GRAUSLICK i'll be checking the UNDERSIDE of the fuse box where TJ didn't sand enough
Zo en dan is het nu tijd voor een sequentiële versnellingsbak.
Lekker Simel Houden 😝
Hahahaha neeeee neee. Nog niet.....😶😶😶
doing things right at first is too boring, the fun part is spending 3 extra days because we tried to save 5 minutes
another good video, keep it going guys!
Hahaha you get the gist 😆thanks for the support. See ya at the next one 😁😁
Very entertaining + good humor. 😅👌
Thanks man! Happy to hear you liked it 😁
And...Here...we...go 😅
(again)
I was hoping for a new vid tonight😅
Will wait for another week😎
We had some....delays...but tomorrow!!! 😄😏🫡
So happy that I got this recommended by TH-cam! Such a fun channel! Zet em op heren!
Hell yeah! Thanks for the compliment, tot de volgende aflevering 😄
Funny my search engine history is quite similar to yours although I think we were looking for differnet things when we typed in... 3D Model & Red Tube 🤣🤣
Red tubes 💀💀💀💀💀 this guy ahahahahah
Whahahahah
“Ahhh, finally. Yesterday, I was a bit sad in the evening. I thought, yet another week to wait for a video.”
Better late then never! We tried a new way of shooting the video, (something called Slog) but instead of the usual 20m rendering time, it now took 10+ hours to render. Bit difficult when we always do everything at the last minute 🤣
@@GRAUSLICK haha, see it like this, today was a great surprise! 😎 awesome project to follow. Great dedication to! Also financially (the blue envelope).😅
fette tracks und geiler build! keep it up!
Vielen dank!!!! 😁😁😁✌️
This is so much fun to wach I already waiting the next episode
Thanks man! Glad you enjoyed it😄
3:42 topfix coming in clutch
Welded entire blown radiators with this stuff , its the goat 🤣🤣
@@GRAUSLICKglued a m3 body kit on one of my shitboxes with this stuff. Its been 3 years and hansnt come off yet 😂
@@twansko4113its just too easy 😅😅
damn i would love to be with you in your shop working on cars :]
Dont you have a crazy 2JZ swap? You are welcome anytime man! 🥰
Lekker bezig mannen!
Merci 😁😁😁
Geschift dat jullie dit allemaal zelf kunnen🤪 keep it up mannen!
Nee we onderschatten gewoon alles! Dan leer je het vanzelf wel...beetje forceren 😆
Lekkere content 🎉
Ja toch 😁
Awesome Car. I love everything about your project and the little details. I have one question. What battery cable clip is this and what size has the cable?
Thanks!
I dont recall the exact size I used, but again thats very dependant on the lengt and amparage thats going to be on the cable. I used a bit thinner cable because it's a stripped out car without much electric functions such as radio, powered windows etc. The connector itself is a Amphenol Industrial connector , specificly their SurLok series. Its a bit tricky to find the correct set of matching ones, but they're not expensive and well worth it! You do need a big hydraulic crimper for it (dont tell anyone I bought mine for 30 bucks off aliexpress). Good luck! 😁😁
If you printed that on ABS or ASA (which I hope you did), you can use acetone with a brush for a nice, chemical weld
Ah man, wish I knew that earlier. But yeah ASA printed. Gonna look into that for any next prints. Thanks for the tip 💪
@@GRAUSLICK no worries, awesome project! Cannot wait to see more
1 keer meten is weten.
2 keer meten is zeker weten 😂
Jij snapt 't 😅😅🫡
Great work!! What type of material did you print? And what glue did you paste? Danke!
Hey! We used ASA for printing. Was decent enough and should be OK for the engine bay temps. Maybe next time we'll use some different changed on the design to make it sturdier instead of copying the original which was designed for simple injection molding plastic. The glue used is 3M 2-component epoxy specifically for plastics. But I think any 2 component epoxy glue would work just fine 😁
zieke auto. zorg voor grote diffuser achter
Ja ben er nog niet over uit wat voor vleugel er achter komt. Kwa diffuser even kijken, moet namelijk wel een beetje subtiel blijven 😆
@@GRAUSLICKdiffuser moet die wel echt hebben als track car
so basically is "let's yolo everything".
That sounds about right 🫡
Put a Ls motor in it
Bruhh 💀💀💀
Yo isn’t it a good idea to
OH HELL NO!
S54 4 the win.
He has the E36 GTR with LS swap@@Pika-bk5sr
Niet de blauwe brieven hahahaa
Lifelong pen palls 😩
Teach us about that abs please 😅
We didnt manage to finish it for this video, so the entire brake/abs setup will be in the next vid!
@@GRAUSLICK good to hear cause I’m tired of my brake setup
What material did you use to print the fusebox?
ASA was used 🙂
@@GRAUSLICK That's awesome 😃, thank you very much! Nice video 😃
@@bimmerstein1856thanks man! Apreciate it 🎉
Why not update electronics to standalone ECU and PDMs?
Because money 🤣🤣🤣. It wont bring any benefits right now besides that its more minimal, but its gonna cost at least 5k and much more work. So for now. This is fine😁
Firewall bulkhead connector type and brand? Need the same! :D
I think it's calles RadLok or something like that, not sure which one exactly....there are soooo many options. Think I ordered it from Mouser (big component webshop)
@@GRAUSLICK thanks!
Love the attention to detail, makes most other builds look rough af! Why bother with putting the carpet back in?
Good question! The carpet hides a TON of parts of junk, making everything look much neater, without it you also need to make/buy footrests etc. And the carpet also keeps out quite a bit of heat from the engine/transmission/exhaust. So for this specific car I think its the right choice. 😁
What is the connector name 19:01
Its a SurLok or Radlok, either one